Benchmark #79952 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#8 / 1,539
826
#322 / 1,539
#308 / 875
#42 / 363
7,294
	Amazon.com AliExpress

Overview
2024-02-21 04:50:25
#79,952
3,256
-4,038 (-124.02%)
Anonymous
111

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
238G
SSD
JMicron
JMicronGeneric
2.10
480
152d:0583
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0583 (Digital Camera)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
29.8 MB/s
35.5 MB/s
34.25 MB/s
4,053 IOPS
3,171 IOPS
16,215 KB/s
12,685 KB/s
13,426 KB/s
14,788 KB/s
12,991 KB/s
16,254 KB/s

inxi Results
System: Host: rpi4-20231108 Kernel: 6.1.0-13-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x39717359 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0583:u console=tty0 console=ttyS1,115200 root=PARTUUID="60361e92-02" rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/3 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 4 GiB available: 3.7 GiB used: 292.3 MiB (7.7%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 120x30 Monitor-1: HDMI-A-2 model: HP E233 built: 2018 res: 1920x1080 dpi: 96 gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.318 y: 0.612 blue: x: 0.149 y: 0.063 white: x: 0.314 y: 0.329 size: 509x286mm (20.04x11.26") diag: 584mm (23") ratio: 16:9 modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 720x576, 720x480, 640x480, 720x400 API: N/A Message: No API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.1.0-13-arm64 status: kernel-api tools: N/A Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: 2001:67c:2344:51:dea6:32ff:fe26:f9c1/64 type: dynamic mngtmpaddr scope: global IP v6: fe80::dea6:32ff:fe26:f9c1/64 scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 188.130.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 245.79 GiB used: 1.84 GiB (0.7%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Transcend model: USDU1 size: 7.31 GiB block-size: physical: 512 B logical: 512 B tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 vendor: JMicron Tech model: Generic size: 238.47 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A drive fw-rev: 0209 drive-rev: 22001070 temp: 64 Celsius C scheme: MBR SMART: yes health: PASSED on: 1y 73d 20h cycles: 1,298 read-units: 13,946,254 [7.14 TB] written-units: 11,550,746 [5.91 TB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 237.97 GiB size: 233.18 GiB (97.99%) used: 1.75 GiB (0.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOTFS uuid: fcfeaa3d-6514-406c-b6ef-eb060f3067d1 ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 83 MiB (16.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 7E11-1A11 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 508 MiB fs: vfat label: RASPIFIRM uuid: 67D7-2282 ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 6.81 GiB fs: ext4 label: RASPIROOT uuid: 29a3769a-4944-4a04-bfc2-8865967a5d7e USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: JMicron / USA JMS583Gen 2 to PCIe Gen3x2 Bridge type: mass storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA chip-ID: 152d:0583 class-ID: 0806 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 42.4 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 335 libs: 186 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main non-free-firmware non-free 2: deb http://deb.debian.org/debian bookworm-updates main non-free-firmware non-free 3: deb http://security.debian.org/debian-security bookworm-security main non-free-firmware non-free Processes: CPU top: 5 of 160 1: cpu: 200% command: ps pid: 919 mem: 3.61 MiB (0.0%) 2: cpu: 2.9% command: init pid: 1 mem: 11.1 MiB (0.2%) 3: cpu: 1.2% command: [kworker/u8:0-flush-8:0] pid: 9 mem: 0.00 MiB (0.0%) 4: cpu: 0.9% command: sshd: pid: 579 mem: 9.64 MiB (0.2%) 5: cpu: 0.6% command: systemd-journald pid: 258 mem: 16.3 MiB (0.4%) Memory top: 5 of 160 1: mem: 16.3 MiB (0.4%) command: systemd-journald pid: 258 cpu: 0.6% 2: mem: 11.1 MiB (0.2%) command: init pid: 1 cpu: 2.9% 3: mem: 9.78 MiB (0.2%) command: systemd pid: 557 cpu: 0.6% 4: mem: 9.64 MiB (0.2%) command: sshd: pid: 554 cpu: 0.5% 5: mem: 9.64 MiB (0.2%) command: sshd: pid: 579 cpu: 0.9% Info: Processes: 160 Uptime: 2m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: N/A Shell: storage.sh (sudo) default: Bash v: 5.2.15 running-in: pty pts/3 (SSH) inxi: 3.3.31

inxi Results

System:
  Host: rpi4-20231108 Kernel: 6.1.0-13-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0
    clocksource: arch_sys_counter
    parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
    dma.dmachans=0x37f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x39717359
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    usb-storage.quirks=152d:0583:u console=tty0 console=ttyS1,115200 root=PARTUUID="60361e92-02"
    rw fsck.repair=yes net.ifnames=0 rootwait
  Console: pty pts/3 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 4 GiB available: 3.7 GiB used: 292.3 MiB (7.7%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil
    cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu
  Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 120x30
  Monitor-1: HDMI-A-2 model: HP E233 built: 2018 res: 1920x1080 dpi: 96
    gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.318 y: 0.612 blue: x: 0.149 y: 0.063
    white: x: 0.314 y: 0.329 size: 509x286mm (20.04x11.26") diag: 584mm (23") ratio: 16:9
    modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768,
    800x600, 720x576, 720x480, 640x480, 720x400
  API: N/A Message: No API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.1.0-13-arm64 status: kernel-api tools: N/A
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X
  IP v6: 2001:67c:2344:51:dea6:32ff:fe26:f9c1/64 type: dynamic mngtmpaddr scope: global
  IP v6: fe80::dea6:32ff:fe26:f9c1/64 scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  WAN IP: 188.130.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 245.79 GiB used: 1.84 GiB (0.7%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Transcend model: USDU1 size: 7.31 GiB block-size:
    physical: 512 B logical: 512 B tech: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 vendor: JMicron Tech model: Generic size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A
    drive fw-rev: 0209 drive-rev: 22001070
    temp: 64 Celsius C scheme: MBR
  SMART: yes health: PASSED on: 1y 73d 20h cycles: 1,298 read-units: 13,946,254 [7.14 TB]
    written-units: 11,550,746 [5.91 TB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 237.97 GiB size: 233.18 GiB (97.99%) used: 1.75 GiB (0.8%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOTFS
    uuid: fcfeaa3d-6514-406c-b6ef-eb060f3067d1
  ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 83 MiB (16.2%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 7E11-1A11
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 508 MiB fs: vfat label: RASPIFIRM uuid: 67D7-2282
  ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 6.81 GiB fs: ext4 label: RASPIROOT
    uuid: 29a3769a-4944-4a04-bfc2-8865967a5d7e
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.1:3 info: JMicron / USA JMS583Gen 2 to PCIe Gen3x2 Bridge type: mass storage
    driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 500mA chip-ID: 152d:0583 class-ID: 0806   Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 42.4 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 335 libs: 186 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main non-free-firmware non-free
    2: deb http://deb.debian.org/debian bookworm-updates main non-free-firmware non-free
    3: deb http://security.debian.org/debian-security bookworm-security main non-free-firmware non-free
Processes:
  CPU top: 5 of 160
  1: cpu: 200% command: ps pid: 919 mem: 3.61 MiB (0.0%)
  2: cpu: 2.9% command: init pid: 1 mem: 11.1 MiB (0.2%)
  3: cpu: 1.2% command: [kworker/u8:0-flush-8:0] pid: 9 mem: 0.00 MiB (0.0%)
  4: cpu: 0.9% command: sshd: pid: 579 mem: 9.64 MiB (0.2%)
  5: cpu: 0.6% command: systemd-journald pid: 258 mem: 16.3 MiB (0.4%)
  Memory top: 5 of 160
  1: mem: 16.3 MiB (0.4%) command: systemd-journald pid: 258 cpu: 0.6%
  2: mem: 11.1 MiB (0.2%) command: init pid: 1 cpu: 2.9%
  3: mem: 9.78 MiB (0.2%) command: systemd pid: 557 cpu: 0.6%
  4: mem: 9.64 MiB (0.2%) command: sshd: pid: 554 cpu: 0.5%
  5: mem: 9.64 MiB (0.2%) command: sshd: pid: 579 cpu: 0.9%
Info:
  Processes: 160 Uptime: 2m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: N/A Shell: storage.sh (sudo) default: Bash v: 5.2.15
  running-in: pty pts/3 (SSH) inxi: 3.3.31

Benchmark #79952 - Brand: Undentified JMicron USB to SATA Adapter