Benchmark #80083 - pibenchmarks.com

Brand: Samsung eMMC (BJTD4)
MMC (Embedded)
#66 / 1,679
289
#511 / 1,679
#15 / 75
#15 / 92
6,983

Overview
2024-02-23 17:42:45
#80,083
3,374
-3,609 (-106.97%)
riyaz3000
Samsung emmc BJTD4 5.2

Storage Details
Samsung eMMC (BJTD4)
MMC (Embedded)
28.9G
MMC
Samsung
BJTD4
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
800 (-700)
500
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
30.2 MB/s
41.64 MB/s
42.2 MB/s
5,796 IOPS
5,233 IOPS
23,187 KB/s
20,935 KB/s
13,664 KB/s
12,894 KB/s
13,373 KB/s
14,781 KB/s

inxi Results
System: Kernel: 6.1.21-v8+ arch: aarch64 bits: 32 compiler: N/A clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=600 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=64ee6a69-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 4 GiB note: est. available: 3.53 GiB used: 272.1 MiB (7.5%) igpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 800 min/max: 600/800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-4: Ingenic CCX2F3298 driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-1.3:5 chip-ID: a108:2231 class-ID: 0e02 Display: server: X.org v: 1.20.11 driver: X: loaded: fbdev unloaded: modesetting gpu: bcm2708_fb tty: 80x40 API: OpenGL Message: GL data unavailable in console, glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi API: ALSA v: k6.1.21-v8+ status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.19 status: n/a (root, process) with: 1: pipewire-pulse status: off 2: pipewire-media-session status: active tools: pw-cat,pw-cli Server-2: PulseAudio v: 14.2 status: active (root, process) tools: pacat,pactl Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-3: OpenMoko Geschwister Schneider CAN adapter driver: gs_usb type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.1:3 chip-ID: 1d50:606f class-ID: fe01 IF: can0 state: up speed: N/A duplex: N/A mac: N/A WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 2c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.12 GiB used: 7.79 GiB (26.8%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB block-size: physical: 512 B logical: 512 B tech: SSD fw-rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.87 GiB size: 28.35 GiB (98.21%) used: 7.74 GiB (27.3%) fs: ext4 block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 1232a209-2596-48f0-a078-731d10b918ad ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 50.2 MiB (19.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: E183-6233 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0boot0 maj-min: 179:32 size: 4 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/mmcblk0boot1 maj-min: 179:64 size: 4 MiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: OpenMoko Geschwister Schneider CAN adapter type: Network driver: gs_usb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 150mA chip-ID: 1d50:606f class-ID: fe01 Device-2: 1-1.2:4 info: OpenMoko lpc1769 type: abstract (modem),CDC-data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 1d50:614e class-ID: 0a00 Device-3: 1-1.3:5 info: Ingenic CCX2F3298 type: video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 200mA chip-ID: a108:2231 class-ID: 0e02 Device-4: 1-1.4:6 info: QinHeng USB2IIC_CTP_CONTROL type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 0.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 power: 64mA chip-ID: 1a86:e2e3 class-ID: 0300 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 38.5 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1499 libs: 814 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 163 1: cpu: 18.9% command: klippy.py started-by: python pid: 547 mem: 26.0 MiB (0.7%) 2: cpu: 4.7% command: screen.py started-by: python pid: 759 mem: 75.2 MiB (2.0%) 3: cpu: 4.0% command: ps pid: 3314 mem: 2.18 MiB (0.0%) 4: cpu: 3.3% command: moonraker.py started-by: python pid: 554 mem: 28.8 MiB (0.7%) 5: cpu: 1.8% command: init pid: 1 mem: 8.88 MiB (0.2%) Memory top: 5 of 163 1: mem: 75.2 MiB (2.0%) command: screen.py started-by: python pid: 759 cpu: 4.7% 2: mem: 40.7 MiB (1.1%) command: xorg pid: 578 cpu: 0.9% 3: mem: 28.8 MiB (0.7%) command: moonraker.py started-by: python pid: 554 cpu: 3.3% 4: mem: 26.3 MiB (0.7%) command: systemd-journald pid: 145 cpu: 0.2% 5: mem: 26.0 MiB (0.7%) command: klippy.py started-by: python pid: 547 cpu: 18.9% Info: Processes: 163 Uptime: 9m Init: systemd v: 247 target: multi-user (3) default: multi-user tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.1.21-v8+ arch: aarch64 bits: 32 compiler: N/A clocksource: arch_sys_counter
    parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0
    snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1024
    bcm2708_fb.fbheight=600 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1
    root=PARTUUID=64ee6a69-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash
    plymouth.ignore-serial-consoles
  Console: N/A Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 4 GiB note: est. available: 3.53 GiB used: 272.1 MiB (7.5%) igpu: 256 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 800 min/max: 600/800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 800 2: 800 3: 800 4: 800 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-4: Ingenic CCX2F3298 driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
    mode: 2.0 bus-ID: 1-1.3:5 chip-ID: a108:2231 class-ID: 0e02 Display: server: X.org v: 1.20.11 driver: X: loaded: fbdev unloaded: modesetting
    gpu: bcm2708_fb tty: 80x40
  API: OpenGL Message: GL data unavailable in console, glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  API: ALSA v: k6.1.21-v8+ status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.19 status: n/a (root, process) with: 1: pipewire-pulse status: off
    2: pipewire-media-session status: active tools: pw-cat,pw-cli
  Server-2: PulseAudio v: 14.2 status: active (root, process) tools: pacat,pactl
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  Device-3: OpenMoko Geschwister Schneider CAN adapter driver: gs_usb type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.1:3 chip-ID: 1d50:606f class-ID: fe01
    IF: can0 state: up speed: N/A duplex: N/A mac: N/A
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 2c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.12 GiB used: 7.79 GiB (26.8%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB block-size:
    physical: 512 B logical: 512 B tech: SSD fw-rev: 0x8 scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.87 GiB size: 28.35 GiB (98.21%) used: 7.74 GiB (27.3%) fs: ext4
    block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 1232a209-2596-48f0-a078-731d10b918ad
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 50.2 MiB (19.9%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: E183-6233
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  ID-1: /dev/mmcblk0boot0 maj-min: 179:32 size: 4 MiB fs: N/A label: N/A uuid: N/A
  ID-2: /dev/mmcblk0boot1 maj-min: 179:64 size: 4 MiB fs: N/A label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.1:3 info: OpenMoko Geschwister Schneider CAN adapter type: Network driver: gs_usb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 150mA
    chip-ID: 1d50:606f class-ID: fe01 Device-2: 1-1.2:4 info: OpenMoko lpc1769 type: abstract (modem),CDC-data driver: cdc_acm
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 1d50:614e class-ID: 0a00 Device-3: 1-1.3:5 info: Ingenic CCX2F3298 type: video driver: uvcvideo interfaces: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 200mA chip-ID: a108:2231 class-ID: 0e02
    Device-4: 1-1.4:6 info: QinHeng USB2IIC_CTP_CONTROL type: HID driver: hid-multitouch,usbhid
    interfaces: 1 rev: 0.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 power: 64mA chip-ID: 1a86:e2e3
    class-ID: 0300
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 38.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1499 libs: 814 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 163
  1: cpu: 18.9% command: klippy.py started-by: python pid: 547 mem: 26.0 MiB (0.7%)
  2: cpu: 4.7% command: screen.py started-by: python pid: 759 mem: 75.2 MiB (2.0%)
  3: cpu: 4.0% command: ps pid: 3314 mem: 2.18 MiB (0.0%)
  4: cpu: 3.3% command: moonraker.py started-by: python pid: 554 mem: 28.8 MiB (0.7%)
  5: cpu: 1.8% command: init pid: 1 mem: 8.88 MiB (0.2%)
  Memory top: 5 of 163
  1: mem: 75.2 MiB (2.0%) command: screen.py started-by: python pid: 759 cpu: 4.7%
  2: mem: 40.7 MiB (1.1%) command: xorg pid: 578 cpu: 0.9%
  3: mem: 28.8 MiB (0.7%) command: moonraker.py started-by: python pid: 554 cpu: 3.3%
  4: mem: 26.3 MiB (0.7%) command: systemd-journald pid: 145 cpu: 0.2%
  5: mem: 26.0 MiB (0.7%) command: klippy.py started-by: python pid: 547 cpu: 18.9%
Info:
  Processes: 163 Uptime: 9m Init: systemd v: 247 target: multi-user (3) default: multi-user
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.31

Benchmark #80083 - Brand: Samsung eMMC (BJTD4)