Benchmark #8021 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL16G)
C10
#53 / 1,679
328
#1,484 / 1,679
#63 / 394
798
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-02 21:52:13
#8,021
777
-21 (-2.70%)
Anonymous
Sandisk

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL16G)
C10
14.8G
SD
SanDisk
SL16G
SDHC
3.00
0x03
SD
8.0
05/2017
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
10.8 MB/s
21.79 MB/s
21.62 MB/s
755 IOPS
1,860 IOPS
3,020 KB/s
7,440 KB/s
5,737 KB/s
3,170 KB/s
5,664 KB/s
2,099 KB/s

inxi Results
System: Host: DietPi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=27504eef-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 991.6 MiB used: 398.4 MiB (40.2%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 200x56 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: wwan0 state: down mac: WAN IP: Drives: Local Storage: total: 1.83 TiB used: 1.56 TiB (85.3%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A2 size: 1.82 TiB block size: physical: 512 B logical: 512 B rev: 1004 scheme: GPT Optical-1: /dev/sr0 vendor: Mass model: Storage rev: 2.31 dev-links: cdrom Features: speed: 1 multisession: yes audio: yes dvd: no rw: none state: running RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.79 GiB size: 14.53 GiB (98.27%) used: 4.83 GiB (33.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 060b57a8-62bd-4d48-a471-0d28466d1fbb ID-2: /boot raw size: 41.8 MiB size: 41.1 MiB (98.43%) used: 23.6 MiB (57.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5DB0-971B ID-3: /mnt/HDD raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 1.56 TiB (85.7%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: VKElement uuid: 24A227BBA227907A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Western Digital Elements 25A2 type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:25a2 Device-3: 1-1.5:12 info: Huawei type: driver: cdc_ether,option,option1,usb-storage interfaces: 7 rev: 2.0 speed: 480 Mb/s chip ID: 12d1:14ab Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/dietpi-php.list 1: deb https: //packages.sury.org/php/ stretch main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 2.3% command: apps.plugin pid: 1258 mem: 2.44 MiB (0.2%) 2: cpu: 1.6% command: smartd pid: 11283 mem: 3.14 MiB (0.3%) 3: cpu: 1.2% command: hass started by: python3.6 pid: 1522 mem: 62.8 MiB (6.4%) 4: cpu: 1.0% command: netdata pid: 1170 mem: 26.6 MiB (2.7%) 5: cpu: 0.7% command: plex pid: 817 mem: 29.9 MiB (3.0%) Memory top: 5 1: mem: 164.1 MiB (16.8%) command: pihole-ftl pid: 765 cpu: 0.4% 2: mem: 62.8 MiB (6.4%) command: hass started by: python3.6 pid: 1522 cpu: 1.2% 3: mem: 46.6 MiB (4.7%) command: plex pid: 636 cpu: 0.5% 4: mem: 29.9 MiB (3.0%) command: plex pid: 817 cpu: 0.7% 5: mem: 26.6 MiB (2.7%) command: netdata pid: 1170 cpu: 1.0% Info: Processes: 119 Uptime: 1h 27m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: DietPi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1280 
           bcm2708_fb.fbheight=720 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=27504eef-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 991.6 MiB used: 398.4 MiB (40.2%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 200x56 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wwan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 1.83 TiB used: 1.56 TiB (85.3%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A2 size: 1.82 TiB 
           block size: physical: 512 B logical: 512 B rev: 1004 scheme: GPT 
           Optical-1: /dev/sr0 vendor: Mass model: Storage rev: 2.31 dev-links: cdrom 
           Features: speed: 1 multisession: yes audio: yes dvd: no rw: none state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.79 GiB size: 14.53 GiB (98.27%) used: 4.83 GiB (33.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 060b57a8-62bd-4d48-a471-0d28466d1fbb 
           ID-2: /boot raw size: 41.8 MiB size: 41.1 MiB (98.43%) used: 23.6 MiB (57.3%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5DB0-971B 
           ID-3: /mnt/HDD raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 1.56 TiB (85.7%) 
           fs: ntfs block size: 4096 B dev: /dev/sda1 label: VKElement uuid: 24A227BBA227907A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: Western Digital Elements 25A2 type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:25a2 
           Device-3: 1-1.5:12 info: Huawei type:  
           driver: cdc_ether,option,option1,usb-storage interfaces: 7 rev: 2.0 speed: 480 Mb/s 
           chip ID: 12d1:14ab 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/dietpi-php.list 
           1: deb https: //packages.sury.org/php/ stretch main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 2.3% command: apps.plugin pid: 1258 mem: 2.44 MiB (0.2%) 
           2: cpu: 1.6% command: smartd pid: 11283 mem: 3.14 MiB (0.3%) 
           3: cpu: 1.2% command: hass started by: python3.6 pid: 1522 mem: 62.8 MiB (6.4%) 
           4: cpu: 1.0% command: netdata pid: 1170 mem: 26.6 MiB (2.7%) 
           5: cpu: 0.7% command: plex pid: 817 mem: 29.9 MiB (3.0%) 
           Memory top: 5 
           1: mem: 164.1 MiB (16.8%) command: pihole-ftl pid: 765 cpu: 0.4% 
           2: mem: 62.8 MiB (6.4%) command: hass started by: python3.6 pid: 1522 cpu: 1.2% 
           3: mem: 46.6 MiB (4.7%) command: plex pid: 636 cpu: 0.5% 
           4: mem: 29.9 MiB (3.0%) command: plex pid: 817 cpu: 0.7% 
           5: mem: 26.6 MiB (2.7%) command: netdata pid: 1170 cpu: 1.0% 
Info:      Processes: 119 Uptime: 1h 27m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #8021 - Brand: SanDisk SD Ultra (SL16G)