Benchmark #8050 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,829
#369 / 1,700
#356 / 989
#35 / 370
8,269
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-03 13:05:06
#8,050
2,354
-5,915 (-251.27%)
Anonymous
with ssd

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
1d6b:0715
0x1d6b (Linux Foundation)
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
73.6 MB/s
278.56 MB/s
222.91 MB/s
1,328 IOPS
12,004 IOPS
5,312 KB/s
48,018 KB/s
9,681 KB/s
3,888 KB/s
9,545 KB/s
4,766 KB/s

inxi Results
System: Host: Schychowski Kernel: 4.19.95-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 182.8 MiB (4.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 102x37 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.95-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 171.27 GiB used: 4.04 GiB (2.4%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120 size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: UE22 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.76 GiB size: 109.50 GiB (97.98%) used: 3.99 GiB (3.6%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: a0c2ee2d-5fa6-43e2-9792-204e0b37c195 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0715 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https: //packages.grafana.com/oss/deb stable main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.1% command: influxd pid: 532 mem: 31.2 MiB (0.7%) 2: cpu: 1.1% command: packagekitd pid: 7266 mem: 12.5 MiB (0.3%) 3: cpu: 0.9% command: init pid: 1 mem: 7.85 MiB (0.1%) 4: cpu: 0.6% command: bash pid: 6975 mem: 2.77 MiB (0.0%) 5: cpu: 0.3% command: frontail started by: node pid: 526 mem: 42.5 MiB (1.0%) Memory top: 5 1: mem: 42.5 MiB (1.0%) command: frontail started by: node pid: 526 cpu: 0.3% 2: mem: 31.2 MiB (0.7%) command: influxd pid: 532 cpu: 3.1% 3: mem: 16.0 MiB (0.4%) command: smbd pid: 626 cpu: 0.0% 4: mem: 15.4 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 542 cpu: 0.0% 5: mem: 12.5 MiB (0.3%) command: packagekitd pid: 7266 cpu: 1.1% Info: Processes: 123 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: Schychowski Kernel: 4.19.95-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda1 rootfstype=ext4 rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 182.8 MiB (4.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 102x37 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.95-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 171.27 GiB used: 4.04 GiB (2.4%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120 size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B rev: UE22 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.76 GiB size: 109.50 GiB (97.98%) used: 3.99 GiB (3.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: a0c2ee2d-5fa6-43e2-9792-204e0b37c195 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 2109:0715 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/grafana.list 
           1: deb https: //packages.grafana.com/oss/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.1% command: influxd pid: 532 mem: 31.2 MiB (0.7%) 
           2: cpu: 1.1% command: packagekitd pid: 7266 mem: 12.5 MiB (0.3%) 
           3: cpu: 0.9% command: init pid: 1 mem: 7.85 MiB (0.1%) 
           4: cpu: 0.6% command: bash pid: 6975 mem: 2.77 MiB (0.0%) 
           5: cpu: 0.3% command: frontail started by: node pid: 526 mem: 42.5 MiB (1.0%) 
           Memory top: 5 
           1: mem: 42.5 MiB (1.0%) command: frontail started by: node pid: 526 cpu: 0.3% 
           2: mem: 31.2 MiB (0.7%) command: influxd pid: 532 cpu: 3.1% 
           3: mem: 16.0 MiB (0.4%) command: smbd pid: 626 cpu: 0.0% 
           4: mem: 15.4 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 542 cpu: 0.0% 
           5: mem: 12.5 MiB (0.3%) command: packagekitd pid: 7266 cpu: 1.1% 
Info:      Processes: 123 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8050 - Brand: SanDisk SSD Plus