Benchmark #80553 - pibenchmarks.com

Brand: QEMU Virtual Hard Disk
Virtual
#77 / 1,539
139
#1,472 / 1,539
#0 / 90
#0 / 13
0
	Amazon.com

Overview
2024-03-02 02:34:34
#80,553
30,121
+30,121 (+100.00%)
Yoo
unknown nvme on nuc

Storage Details
QEMU Virtual Hard Disk
Virtual
32G
USB Flash
QEMU
QEMUQEMUUSBTablet
None

System Board Details

QEMU Standard PC (i440FX + PIIX, 1996)
Standard PC (i440FX + PIIX, 1996)
QEMU
Intel Core i7-6770HQ
4
2,000
N/A
N/A

Operating System

Arch Linux
x86_64

Benchmark Results
414 MB/s
866.11 MB/s
3381.5 MB/s
45,209 IOPS
98,461 IOPS
180,838 KB/s
393,846 KB/s
124,914 KB/s
90,870 KB/s
131,553 KB/s
100,024 KB/s

inxi Results
System: Kernel: 6.7.6-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 13.2.1 clocksource: kvm-clock available: tsc,hpet,acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f453941b-2d49-44d3-8cc4-c4c41ed2fc37 rw loglevel=3 nowatchdog nvme_load=YES Console: pty pts/0 DM: LXDM Distro: Arch Linux Machine: Type: Kvm System: QEMU product: Standard PC (i440FX + PIIX, 1996) v: pc-i440fx-7.1 N/A Chassis: type: 1 v: pc-i440fx-7.1 N/A Mobo: N/A model: N/A N/A BIOS: SeaBIOS v: rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org date: 04/01/2014 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 2.94 GiB available: 2.84 GiB used: 554.3 MiB (19.0%) Array-1: capacity: 2.94 GiB slots: 1 modules: 1 EC: Multi-bit ECC max-module-size: 2.94 GiB note: est. Device-1: DIMM 0 type: RAM detail: N/A size: 2.94 GiB speed: N/A volts: N/A width: N/A manufacturer: QEMU part-no: N/A N/A PCI Slots: Message: No PCI Slot data found. CPU: Info: model: Intel Core i7-6770HQ bits: 64 type: MCP arch: Skylake-S gen: core 6 level: v3 note: check built: 2015 process: Intel 14nm family: 6 model-id: 0x5E (94) stepping: 3 microcode: 0xBA Topology: cpus: 1x cores: 4 smt: cache: L1: 256 KiB desc: d-4x32 KiB! i-4x32 KiB L2: 16 MiB desc: 4x4 MiB L3: 16 MiB desc: 1x16 MiB Speed (MHz): avg: 2592 min/max: N/A base/boost: 2000/2000 cores: 1: 2592 2: 2592 3: 2592 4: 2592 bogomips: 20744 Flags: 3dnowprefetch abm adx aes apic arat arch_capabilities arch_perfmon avx avx2 bmi1 bmi2 clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ept ept_ad erms f16c flexpriority fma fpu fsgsbase fxsr hle ht hypervisor invpcid lahf_lm lm mca mce mmx movbe mpx msr mtrr nopl nx pae pat pcid pclmulqdq pdcm pdpe1gb pge pni popcnt pse pse36 pti rdrand rdseed rdtscp rep_good rtm sep smap smep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology Vulnerabilities: Type: gather_data_sampling status: Unknown: Dependent on hypervisor status Type: itlb_multihit status: Not affected Type: l1tf mitigation: PTE Inversion! VMX: flush not necessary, SMT disabled Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host state unknown Type: meltdown mitigation: PTI Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host state unknown Type: retbleed status: Vulnerable Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Unknown: Dependent on hypervisor status Type: tsx_async_abort status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host state unknown Graphics: Device-1: vendor: Red Hat driver: bochs-drm v: N/A alternate: bochs ports: active: Virtual-1 empty: none bus-ID: 00:02.0 chip-ID: 1234:1111 class-ID: 0300 Display: server: X.org v: 1.21.X.X driver: X: loaded: modesetting alternate: fbdev,vesa gpu: bochs-drm tty: 80x40 Monitor-1: Virtual-1 model: QEMU Monitor built: 2014 res: 1280x800 dpi: 100 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329 size: 325x203mm (12.8x7.99") diag: 383mm (15.1") ratio: 16:10 modes: 1280x800, 1920x1080, 1600x1200, 1680x1050, 1400x1050, 1280x1024, 1440x900, 1280x960, 1360x768, 1280x768, 1024x768, 800x600, 640x480 EDID-Warnings: 1: parse_edid: unknown flag 247 2: parse_edid: unhandled CEA mode 125 3: parse_edid: unhandled CEA mode 101 4: parse_edid: unhandled CEA mode 96 5: parse_edid: unhandled CEA mode 89 6: parse_edid: unhandled CEA mode 97 API: EGL Message: No EGL data available. API: OpenGL Message: GL data unavailable in console for root. Audio: Message: No device data found. Server-1: PipeWire v: 1.0.3 status: off with: 1: pipewire-pulse status: off 2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl Network: Device-1: Intel 82371AB/EB/MB PIIX4 ACPI vendor: Red Hat Qemu virtual machine type: network bridge driver: piix4_smbus v: N/A modules: i2c_piix4 port: N/A bus-ID: 00:01.3 chip-ID: 8086:7113 class-ID: 0680 Device-2: Red Hat Virtio network driver: virtio-pci v: 1 modules: virtio_pci port: f0e0 bus-ID: 00:12.0 chip-ID: 1af4:1000 class-ID: 0200 IF: ens18 state: up speed: -1 duplex: unknown mac: IP v4: scope: global broadcast: IP v6: virtual: proto kernel_ll scope: link WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 32 GiB used: 12.07 GiB (37.7%) ID-1: /dev/vda maj-min: 254:0 model: N/A size: 32 GiB block-size: physical: 512 B logical: 512 B speed: tech: N/A N/A scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Optical-1: /dev/sr0 vendor: QEMU model: QEMU DVD-ROM rev: 2.5+ dev-links: cdrom Features: speed: 4 multisession: yes audio: yes dvd: yes rw: none state: running Partition: ID-1: / raw-size: 32 GiB size: 31.32 GiB (97.89%) used: 12.07 GiB (38.5%) fs: ext4 block-size: 4096 B dev: /dev/vda1 maj-min: 254:1 label: N/A uuid: f453941b-2d49-44d3-8cc4-c4c41ed2fc37 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900 Device-1: 1-1:2 info: Adomax QEMU Tablet type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 0627:0001 class-ID: 0300 Sensors: Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors. Repos: Packages: pm: pacman pkgs: 871 libs: 236 tools: paru,yay Active pacman repo servers in: /etc/pacman.d/endeavouros-mirrorlist 1: https: //endeavour.remi.lu/repo/$repo/$arch 2: https: //de.freedif.org/EndeavourOS/repo/$repo/$arch 3: https: //mirror.moson.org/endeavouros/repo/$repo/$arch 4: https: //mirror.alpix.eu/endeavouros/repo/$repo/$arch 5: https: //ftp.acc.umu.se/mirror/endeavouros/repo/$repo/$arch 6: https: //fastmirror.pp.ua/endeavouros/repo/$repo/$arch 7: https: //mirror.linux.pizza/endeavouros/repo/$repo/$arch 8: https: //mirror.jordanrey.me/endeavouros/repo/$repo/$arch 9: https: //ca.gate.endeavouros.com/endeavouros/repo/$repo/$arch 10: https: //mirror.jingk.ai/endeavouros/repo/$repo/$arch 11: https: //mirror.funami.tech/endeavouros/repo/$repo/$arch 12: https: //mirror.archlinux.tw/EndeavourOS/repo/$repo/$arch 13: https: //mirrors.tuna.tsinghua.edu.cn/endeavouros/repo/$repo/$arch 14: https: //mirror.freedif.org/EndeavourOS/repo/$repo/$arch Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: https: //mirror.mijn.host/archlinux/$repo/os/$arch 2: https: //mirror.lyrahosting.com/archlinux/$repo/os/$arch 3: https: //lon.mirror.rackspace.com/archlinux/$repo/os/$arch 4: https: //archlinux.mirror.liteserver.nl/$repo/os/$arch 5: https: //mirror.cov.ukservers.com/archlinux/$repo/os/$arch 6: https: //mirror.i3d.net/pub/archlinux/$repo/os/$arch 7: https: //mirrors.gethosted.online/archlinux/$repo/os/$arch 8: https: //mirrors.ukfast.co.uk/sites/archlinux.org/$repo/os/$arch 9: https: //geo.mirror.pkgbuild.com/$repo/os/$arch 10: https: //mirror.rackspace.com/archlinux/$repo/os/$arch Processes: CPU top: 5 of 120 1: cpu: 0.2% command: dirmngr pid: 9622 mem: 25.5 MiB (0.8%) 2: cpu: 0.0% command: systemd pid: 1 mem: 13.1 MiB (0.4%) 3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 4: cpu: 0.0% command: [pool_workqueue_release] pid: 3 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [kworker/r-rcu_g] pid: 4 mem: 0.00 MiB (0.0%) Memory top: 5 of 120 1: mem: 97.6 MiB (3.3%) command: lxdm-greeter-gtk pid: 428 cpu: 0.0% 2: mem: 44.9 MiB (1.5%) command: firewalld started-by: python pid: 286 cpu: 0.0% 3: mem: 26.0 MiB (0.8%) command: dirmngr pid: 2764 cpu: 0.0% 4: mem: 25.5 MiB (0.8%) command: dirmngr pid: 9622 cpu: 0.2% 5: mem: 25.3 MiB (0.8%) command: xorg pid: 365 cpu: 0.0% Info: Processes: 120 Uptime: 6d 15h 20m wakeups: 0 Init: systemd v: 255 default: graphical tool: systemctl Compilers: gcc: 13.2.1 Client: shell wrapper v: 5.2.26-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.7.6-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 13.2.1 clocksource: kvm-clock
    available: tsc,hpet,acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-linux
    root=UUID=f453941b-2d49-44d3-8cc4-c4c41ed2fc37 rw loglevel=3 nowatchdog nvme_load=YES
  Console: pty pts/0 DM: LXDM Distro: Arch Linux
Machine:
  Type: Kvm System: QEMU product: Standard PC (i440FX + PIIX, 1996) v: pc-i440fx-7.1 N/A
    Chassis: type: 1 v: pc-i440fx-7.1 N/A
  Mobo: N/A model: N/A N/A BIOS: SeaBIOS v: rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org
    date: 04/01/2014
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 2.94 GiB available: 2.84 GiB used: 554.3 MiB (19.0%)
  Array-1: capacity: 2.94 GiB slots: 1 modules: 1 EC: Multi-bit ECC max-module-size: 2.94 GiB
    note: est.
  Device-1: DIMM 0 type: RAM detail: N/A size: 2.94 GiB speed: N/A volts: N/A width: N/A
    manufacturer: QEMU part-no: N/A N/A
PCI Slots:
  Message: No PCI Slot data found.
CPU:
  Info: model: Intel Core i7-6770HQ bits: 64 type: MCP arch: Skylake-S gen: core 6 level: v3
    note: check built: 2015 process: Intel 14nm family: 6 model-id: 0x5E (94) stepping: 3
    microcode: 0xBA
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 256 KiB desc: d-4x32 KiB! i-4x32 KiB
    L2: 16 MiB desc: 4x4 MiB L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 2592 min/max: N/A base/boost: 2000/2000 cores: 1: 2592 2: 2592 3: 2592
    4: 2592 bogomips: 20744
  Flags: 3dnowprefetch abm adx aes apic arat arch_capabilities arch_perfmon avx avx2 bmi1 bmi2
    clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ept ept_ad erms f16c
    flexpriority fma fpu fsgsbase fxsr hle ht hypervisor invpcid lahf_lm lm mca mce mmx movbe mpx
    msr mtrr nopl nx pae pat pcid pclmulqdq pdcm pdpe1gb pge pni popcnt pse pse36 pti rdrand
    rdseed rdtscp rep_good rtm sep smap smep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tpr_shadow
    tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip vme vmx vnmi vpid x2apic xgetbv1 xsave
    xsavec xsaveopt xsaves xtopology
  Vulnerabilities:
  Type: gather_data_sampling status: Unknown: Dependent on hypervisor status
  Type: itlb_multihit status: Not affected
  Type: l1tf mitigation: PTE Inversion! VMX: flush not necessary, SMT disabled
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host state unknown
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host
    state unknown
  Type: retbleed status: Vulnerable
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
    affected
  Type: srbds status: Unknown: Dependent on hypervisor status
  Type: tsx_async_abort status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host
    state unknown
Graphics:
  Device-1: vendor: Red Hat driver: bochs-drm v: N/A alternate: bochs ports: active: Virtual-1
    empty: none bus-ID: 00:02.0 chip-ID: 1234:1111 class-ID: 0300
  Display: server: X.org v: 1.21.X.X driver: X: loaded: modesetting alternate: fbdev,vesa
    gpu: bochs-drm tty: 80x40
  Monitor-1: Virtual-1 model: QEMU Monitor built: 2014 res: 1280x800 dpi: 100 gamma: 1.2 chroma:
    red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329
    size: 325x203mm (12.8x7.99") diag: 383mm (15.1") ratio: 16:10 modes: 1280x800, 1920x1080,
    1600x1200, 1680x1050, 1400x1050, 1280x1024, 1440x900, 1280x960, 1360x768, 1280x768, 1024x768,
    800x600, 640x480
  EDID-Warnings: 1: parse_edid: unknown flag 247 2: parse_edid: unhandled CEA mode 125
    3: parse_edid: unhandled CEA mode 101 4: parse_edid: unhandled CEA mode 96 5: parse_edid:
    unhandled CEA mode 89 6: parse_edid: unhandled CEA mode 97
  API: EGL Message: No EGL data available.
  API: OpenGL Message: GL data unavailable in console for root.
Audio:
  Message: No device data found.
  Server-1: PipeWire v: 1.0.3 status: off with: 1: pipewire-pulse status: off 2: wireplumber
    status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82371AB/EB/MB PIIX4 ACPI vendor: Red Hat Qemu virtual machine
    type: network bridge driver: piix4_smbus v: N/A modules: i2c_piix4 port: N/A bus-ID: 00:01.3
    chip-ID: 8086:7113 class-ID: 0680
  Device-2: Red Hat Virtio network driver: virtio-pci v: 1 modules: virtio_pci port: f0e0
    bus-ID: 00:12.0 chip-ID: 1af4:1000 class-ID: 0200
  IF: ens18 state: up speed: -1 duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  virtual: proto kernel_ll scope: link
  WAN IP: 
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 32 GiB used: 12.07 GiB (37.7%)
  ID-1: /dev/vda maj-min: 254:0 model: N/A size: 32 GiB block-size: physical: 512 B
    logical: 512 B speed:  tech: N/A N/A scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Optical-1: /dev/sr0 vendor: QEMU model: QEMU DVD-ROM rev: 2.5+ dev-links: cdrom
  Features: speed: 4 multisession: yes audio: yes dvd: yes rw: none state: running
Partition:
  ID-1: / raw-size: 32 GiB size: 31.32 GiB (97.89%) used: 12.07 GiB (38.5%) fs: ext4
    block-size: 4096 B dev: /dev/vda1 maj-min: 254:1 label: N/A
    uuid: f453941b-2d49-44d3-8cc4-c4c41ed2fc37
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
  Device-1: 1-1:2 info: Adomax QEMU Tablet type: HID driver: hid-generic,usbhid interfaces: 1
    rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 0627:0001
    class-ID: 0300 Sensors:
  Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
  Packages: pm: pacman pkgs: 871 libs: 236 tools: paru,yay
  Active pacman repo servers in: /etc/pacman.d/endeavouros-mirrorlist
    1: https: //endeavour.remi.lu/repo/$repo/$arch
    2: https: //de.freedif.org/EndeavourOS/repo/$repo/$arch
    3: https: //mirror.moson.org/endeavouros/repo/$repo/$arch
    4: https: //mirror.alpix.eu/endeavouros/repo/$repo/$arch
    5: https: //ftp.acc.umu.se/mirror/endeavouros/repo/$repo/$arch
    6: https: //fastmirror.pp.ua/endeavouros/repo/$repo/$arch
    7: https: //mirror.linux.pizza/endeavouros/repo/$repo/$arch
    8: https: //mirror.jordanrey.me/endeavouros/repo/$repo/$arch
    9: https: //ca.gate.endeavouros.com/endeavouros/repo/$repo/$arch
    10: https: //mirror.jingk.ai/endeavouros/repo/$repo/$arch
    11: https: //mirror.funami.tech/endeavouros/repo/$repo/$arch
    12: https: //mirror.archlinux.tw/EndeavourOS/repo/$repo/$arch
    13: https: //mirrors.tuna.tsinghua.edu.cn/endeavouros/repo/$repo/$arch
    14: https: //mirror.freedif.org/EndeavourOS/repo/$repo/$arch
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https: //mirror.mijn.host/archlinux/$repo/os/$arch
    2: https: //mirror.lyrahosting.com/archlinux/$repo/os/$arch
    3: https: //lon.mirror.rackspace.com/archlinux/$repo/os/$arch
    4: https: //archlinux.mirror.liteserver.nl/$repo/os/$arch
    5: https: //mirror.cov.ukservers.com/archlinux/$repo/os/$arch
    6: https: //mirror.i3d.net/pub/archlinux/$repo/os/$arch
    7: https: //mirrors.gethosted.online/archlinux/$repo/os/$arch
    8: https: //mirrors.ukfast.co.uk/sites/archlinux.org/$repo/os/$arch
    9: https: //geo.mirror.pkgbuild.com/$repo/os/$arch
    10: https: //mirror.rackspace.com/archlinux/$repo/os/$arch
Processes:
  CPU top: 5 of 120
  1: cpu: 0.2% command: dirmngr pid: 9622 mem: 25.5 MiB (0.8%)
  2: cpu: 0.0% command: systemd pid: 1 mem: 13.1 MiB (0.4%)
  3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%)
  4: cpu: 0.0% command: [pool_workqueue_release] pid: 3 mem: 0.00 MiB (0.0%)
  5: cpu: 0.0% command: [kworker/r-rcu_g] pid: 4 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 120
  1: mem: 97.6 MiB (3.3%) command: lxdm-greeter-gtk pid: 428 cpu: 0.0%
  2: mem: 44.9 MiB (1.5%) command: firewalld started-by: python pid: 286 cpu: 0.0%
  3: mem: 26.0 MiB (0.8%) command: dirmngr pid: 2764 cpu: 0.0%
  4: mem: 25.5 MiB (0.8%) command: dirmngr pid: 9622 cpu: 0.2%
  5: mem: 25.3 MiB (0.8%) command: xorg pid: 365 cpu: 0.0%
Info:
  Processes: 120 Uptime: 6d 15h 20m wakeups: 0 Init: systemd v: 255 default: graphical
  tool: systemctl Compilers: gcc: 13.2.1 Client: shell wrapper v: 5.2.26-release inxi: 3.3.31

Benchmark #80553 - Brand: QEMU Virtual Hard Disk