Benchmark #8058 - pibenchmarks.com

Brand: Verbatim Store n Go
USB Flash
#339 / 1,672
32
#1,486 / 1,672
#65 / 93
#61 / 89
733
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.sg

Overview
2020-02-03 17:00:56
#8,058
799
+66 (+8.26%)
BobTheBuilder
RPi4 USB 3.0

Storage Details
Verbatim Store n Go
USB Flash
USB Flash
Verbatim
STORENGO
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
21.3 MB/s
99 IOPS
2,015 IOPS
396 KB/s
8,060 KB/s
10,382 KB/s
2,378 KB/s
7,782 KB/s
555 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=5 datadev=UUID=dcb674a6-a00c-45e4-8bca-fa21c749bf37 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.89 GiB used: 360.3 MiB (18.6%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 189x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 65.19 GiB used: 960.5 MiB (1.4%) ID-1: /dev/mmcblk0 model: USDU1 size: 7.51 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Verbatim model: STORE N GO size: 57.68 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 7.51 GiB size: 7.51 GiB (99.95%) used: 960.5 MiB (12.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 9016-4EF8 Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda2 size: 57.55 GiB fs: ext4 label: berryboot uuid: dcb674a6-a00c-45e4-8bca-fa21c749bf37 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Verbatim type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 18a5:0250 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.6% command: systemd pid: 1 mem: 8.16 MiB (0.4%) 2: cpu: 0.3% command: [irq/24-mmc1] pid: 72 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 887 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: [usb-storage] pid: 88 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [jbd2/sda2-8] pid: 115 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 8.16 MiB (0.4%) command: systemd pid: 1 cpu: 0.6% 2: mem: 6.57 MiB (0.3%) command: systemd pid: 617 cpu: 0.0% 3: mem: 6.25 MiB (0.3%) command: systemd-journald pid: 1974 cpu: 0.0% 4: mem: 6.24 MiB (0.3%) command: sshd: pid: 752 cpu: 0.0% 5: mem: 5.71 MiB (0.3%) command: systemd-logind pid: 342 cpu: 0.0% Info: Processes: 132 Uptime: 32m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=5 
           datadev=UUID=dcb674a6-a00c-45e4-8bca-fa21c749bf37 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.89 GiB used: 360.3 MiB (18.6%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 189x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 65.19 GiB used: 960.5 MiB (1.4%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 7.51 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Verbatim model: STORE N GO size: 57.68 GiB block size: 
           physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 7.51 GiB size: 7.51 GiB (99.95%) used: 960.5 MiB (12.5%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 9016-4EF8 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 57.55 GiB fs: ext4 label: berryboot 
           uuid: dcb674a6-a00c-45e4-8bca-fa21c749bf37 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Verbatim type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.2 speed: 5 Gb/s chip ID: 18a5:0250 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.6% command: systemd pid: 1 mem: 8.16 MiB (0.4%) 
           2: cpu: 0.3% command: [irq/24-mmc1] pid: 72 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 887 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: [usb-storage] pid: 88 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [jbd2/sda2-8] pid: 115 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.16 MiB (0.4%) command: systemd pid: 1 cpu: 0.6% 
           2: mem: 6.57 MiB (0.3%) command: systemd pid: 617 cpu: 0.0% 
           3: mem: 6.25 MiB (0.3%) command: systemd-journald pid: 1974 cpu: 0.0% 
           4: mem: 6.24 MiB (0.3%) command: sshd: pid: 752 cpu: 0.0% 
           5: mem: 5.71 MiB (0.3%) command: systemd-logind pid: 342 cpu: 0.0% 
Info:      Processes: 132 Uptime: 32m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8058 - Brand: Verbatim Store n Go