Benchmark #80936 - pibenchmarks.com

Brand: EDILOCA EN600 Pro
SSD (M.2 NVMe)
#274 / 1,672
48
#69 / 1,672
#69 / 983
#65 / 280
43,692
	Amazon.com AliExpress

Overview
2024-03-05 02:14:57
#80,936
53,251
+9,559 (+17.95%)
mike91390
PNY CS1030 1TB SSD on Raspberry Pi 5 using Geekworm X1001 Pcie

Storage Details
EDILOCA EN600 Pro
SSD (M.2 NVMe)
238G
SSD
EDILOCA
EN600Pro256GB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
3,000 (+600)
900
2,133

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
439 MB/s
830.03 MB/s
763.84 MB/s
100,886 IOPS
115,706 IOPS
403,546 KB/s
462,824 KB/s
172,671 KB/s
214,887 KB/s
78,259 KB/s
270,333 KB/s

inxi Results
System: Host: RPI5 Kernel: 6.1.0-rpi8-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=dfaaf4e6-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: pty pts/1 DM: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.86 GiB used: 578.5 MiB (7.2%) igpu: 4 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 3000 max: 3000 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 3000 2: 3000 3: 3000 4: 3000 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 driver: X: loaded: modesetting unloaded: fbdev dri: vc4 gpu: vc4_hdmi,vc4_hdmi tty: 110x36 API: EGL v: 1.5 hw: drv: broadcom v3d platforms: device: 0 egl: 1.4 drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d inactive: wayland,x11 API: OpenGL Message: GL data unavailable in console for root. Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.1.0-rpi8-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: driver: rp1 v: N/A port: N/A bus-ID: 0001:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2a01:e0a:2da:5660:b126:1cd2:90:98b7/64 type: temporary dynamic scope: global IP v6: 2a01:e0a:2da:5660:f4e6:1c62:897b:a526/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::a05b:15cd:912:4fb/64 type: noprefixroute scope: link WAN IP: 82.65.X.X Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 12.13 GiB (5.1%) ID-1: /dev/nvme0n1 maj-min: 259:0 model: EDILOCA EN600 Pro 256GB size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD fw-rev: SN11795 temp: 32° (305 Kelvin) C scheme: MBR SMART: yes health: PASSED on: 40 hrs cycles: 240 read-units: 600,334 [307 GB] written-units: 760,629 [389 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 237.97 GiB size: 233.18 GiB (97.99%) used: 12.06 GiB (5.2%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs uuid: 3b614a3f-4a65-4480-876a-8a998e01ac9b ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 72.9 MiB (14.3%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: bootfs uuid: 5DF9-E225 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 51.4 C mobo: N/A Fan Speeds (rpm): cpu: 2609 Repos: Packages: pm: dpkg pkgs: 2554 libs: 1477 tools: apt,apt-get,gnome-software,nala,synaptic Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.com/debian/ bookworm main Processes: CPU top: 5 of 187 1: cpu: 0.2% command: lightdm-gtk-greeter pid: 1150 mem: 109.2 MiB (1.3%) 2: cpu: 0.1% command: init pid: 1 mem: 12.5 MiB (0.1%) 3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%) Memory top: 5 of 187 1: mem: 109.2 MiB (1.3%) command: lightdm-gtk-greeter pid: 1150 cpu: 0.2% 2: mem: 104.1 MiB (1.2%) command: mariadbd pid: 934 cpu: 0.0% 3: mem: 89.2 MiB (1.1%) command: xorg pid: 1106 cpu: 0.0% 4: mem: 39.7 MiB (0.4%) command: wireplumber pid: 1322 cpu: 0.0% 5: mem: 39.2 MiB (0.4%) command: wireplumber pid: 1148 cpu: 0.0% Info: Processes: 187 Uptime: 5m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: ssd (sudo) default: Bash v: 5.2.15 running-in: pty pts/1 (SSH) inxi: 3.3.31

inxi Results

System:
  Host: RPI5 Kernel: 6.1.0-rpi8-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0
    clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1
    pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000
    console=ttyAMA10,115200 console=tty1 root=PARTUUID=dfaaf4e6-02 rootfstype=ext4
    fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  Console: pty pts/1 DM: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.86 GiB used: 578.5 MiB (7.2%) igpu: 4 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 3000 max: 3000 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 3000
    2: 3000 3: 3000 4: 3000 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 driver: X: loaded: modesetting
    unloaded: fbdev dri: vc4 gpu: vc4_hdmi,vc4_hdmi tty: 110x36
  API: EGL v: 1.5 hw: drv: broadcom v3d platforms: device: 0 egl: 1.4 drv: v3d device: 1
    drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d inactive: wayland,x11
  API: OpenGL Message: GL data unavailable in console for root.
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.1.0-rpi8-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse
    status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl
Network:
  Device-1: driver: rp1 v: N/A port: N/A bus-ID: 0001:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X
  IP v6: 2a01:e0a:2da:5660:b126:1cd2:90:98b7/64 type: temporary dynamic scope: global
  IP v6: 2a01:e0a:2da:5660:f4e6:1c62:897b:a526/64 type: dynamic mngtmpaddr noprefixroute
    scope: global
  IP v6: fe80::a05b:15cd:912:4fb/64 type: noprefixroute scope: link
  WAN IP: 82.65.X.X
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000
    class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9
    sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
  Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 238.47 GiB used: 12.13 GiB (5.1%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 model: EDILOCA EN600 Pro 256GB size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD     fw-rev: SN11795 temp: 32° (305 Kelvin) C scheme: MBR
  SMART: yes health: PASSED on: 40 hrs cycles: 240 read-units: 600,334 [307 GB]
    written-units: 760,629 [389 GB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 237.97 GiB size: 233.18 GiB (97.99%) used: 12.06 GiB (5.2%) fs: ext4
    block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs
    uuid: 3b614a3f-4a65-4480-876a-8a998e01ac9b
  ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 72.9 MiB (14.3%) fs: vfat
    block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: bootfs uuid: 5DF9-E225
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 51.4 C mobo: N/A
  Fan Speeds (rpm): cpu: 2609
Repos:
  Packages: pm: dpkg pkgs: 2554 libs: 1477 tools: apt,apt-get,gnome-software,nala,synaptic
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.com/debian/ bookworm main
Processes:
  CPU top: 5 of 187
  1: cpu: 0.2% command: lightdm-gtk-greeter pid: 1150 mem: 109.2 MiB (1.3%)
  2: cpu: 0.1% command: init pid: 1 mem: 12.5 MiB (0.1%)
  3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%)
  4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%)
  5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 187
  1: mem: 109.2 MiB (1.3%) command: lightdm-gtk-greeter pid: 1150 cpu: 0.2%
  2: mem: 104.1 MiB (1.2%) command: mariadbd pid: 934 cpu: 0.0%
  3: mem: 89.2 MiB (1.1%) command: xorg pid: 1106 cpu: 0.0%
  4: mem: 39.7 MiB (0.4%) command: wireplumber pid: 1322 cpu: 0.0%
  5: mem: 39.2 MiB (0.4%) command: wireplumber pid: 1148 cpu: 0.0%
Info:
  Processes: 187 Uptime: 5m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: ssd (sudo) default: Bash v: 5.2.15
  running-in: pty pts/1 (SSH) inxi: 3.3.31

Benchmark #80936 - Brand: EDILOCA EN600 Pro