Benchmark #8140 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,677
1,729
#416 / 1,677
#402 / 984
#47 / 370
7,640
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-05 13:01:35
#8,140
7,041
-599 (-8.51%)
Anonymous

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
240G
SSD
SanDisk
SDSSDA240G
2.5 inch
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
75.6 MB/s
269.64 MB/s
296.1 MB/s
11,234 IOPS
25,409 IOPS
44,936 KB/s
101,637 KB/s
30,984 KB/s
24,666 KB/s
17,355 KB/s
28,828 KB/s

inxi Results
System: Host: HassioPi4B Kernel: 4.19.97-v8-27 aarch64 bits: 64 compiler: gcc v: 9.2.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:3840x2160M@30,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 fsck.repair=yes fsck.mode=auto root=/dev/sda2 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 1.11 GiB (29.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x21 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v8-27 Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth012f307 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth20b27cb state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth7a89f4a state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethb3778c1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethd54f4cb state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 253.38 GiB used: 5.48 GiB (2.2%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: SDSSDA240G size: 223.57 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.79 GiB (98.42%) used: 5.44 GiB (2.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 42.5 MiB (16.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: E497-1FDF ID-3: /snap/core/8271 raw size: 78.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-4: /snap/docker/427 raw size: 94.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: E497-1FDF ID-2: /dev/mmcblk0p2 size: 2.43 GiB fs: ext4 label: writable uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech iTouch Composite type: Keyboard,HID driver: logitech,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c30a Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse 11: deb https: //download.webmin.com/download/repository sarge contrib 12: deb http: //ports.ubuntu.com/ubuntu-ports bionic-proposed restricted main multiverse universe Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main Processes: CPU top: 5 1: cpu: 0.8% command: python3 pid: 4153 mem: 114.1 MiB (2.9%) 2: cpu: 0.5% command: dockerd pid: 1029 mem: 79.3 MiB (2.0%) 3: cpu: 0.5% command: containerd pid: 1092 mem: 40.8 MiB (1.0%) 4: cpu: 0.2% command: mysqld pid: 4882 mem: 186.8 MiB (4.9%) 5: cpu: 0.2% command: [kworker/u8:0-ev] pid: 5247 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 186.8 MiB (4.9%) command: mysqld pid: 4882 cpu: 0.2% 2: mem: 114.1 MiB (2.9%) command: python3 pid: 4153 cpu: 0.8% 3: mem: 79.3 MiB (2.0%) command: dockerd pid: 1029 cpu: 0.5% 4: mem: 49.1 MiB (1.2%) command: docker pid: 1603 cpu: 0.0% 5: mem: 48.9 MiB (1.2%) command: python3 pid: 1676 cpu: 0.1% Info: Processes: 160 Uptime: 4h 53m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

inxi Results

System:    Host: HassioPi4B Kernel: 4.19.97-v8-27 aarch64 bits: 64 compiler: gcc v: 9.2.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:3840x2160M@30,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           fsck.repair=yes fsck.mode=auto root=/dev/sda2 rootfstype=ext4 elevator=deadline 
           rootwait 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 1.11 GiB (29.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x21 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v8-27 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth012f307 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth20b27cb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth7a89f4a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethb3778c1 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethd54f4cb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 253.38 GiB used: 5.48 GiB (2.2%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SDSSDA240G size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.79 GiB (98.42%) used: 5.44 GiB (2.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 42.5 MiB (16.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: E497-1FDF 
           ID-3: /snap/core/8271 raw size: 78.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-4: /snap/docker/427 raw size: 94.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: E497-1FDF 
           ID-2: /dev/mmcblk0p2 size: 2.43 GiB fs: ext4 label: writable 
           uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech iTouch Composite type: Keyboard,HID 
           driver: logitech,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c30a 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge 
           ASM1153 SATA 3Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           11: deb https: //download.webmin.com/download/repository sarge contrib
           12: deb http: //ports.ubuntu.com/ubuntu-ports bionic-proposed restricted main multiverse universe
           Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 
           1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 0.8% command: python3 pid: 4153 mem: 114.1 MiB (2.9%) 
           2: cpu: 0.5% command: dockerd pid: 1029 mem: 79.3 MiB (2.0%) 
           3: cpu: 0.5% command: containerd pid: 1092 mem: 40.8 MiB (1.0%) 
           4: cpu: 0.2% command: mysqld pid: 4882 mem: 186.8 MiB (4.9%) 
           5: cpu: 0.2% command: [kworker/u8:0-ev] pid: 5247 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 186.8 MiB (4.9%) command: mysqld pid: 4882 cpu: 0.2% 
           2: mem: 114.1 MiB (2.9%) command: python3 pid: 4153 cpu: 0.8% 
           3: mem: 79.3 MiB (2.0%) command: dockerd pid: 1029 cpu: 0.5% 
           4: mem: 49.1 MiB (1.2%) command: docker pid: 1603 cpu: 0.0% 
           5: mem: 48.9 MiB (1.2%) command: python3 pid: 1676 cpu: 0.1% 
Info:      Processes: 160 Uptime: 4h 53m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 
           alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

Benchmark #8140 - Brand: SanDisk SSD Plus