Benchmark #8158 - pibenchmarks.com

Brand: OCZ Agility 2 Series
SSD (2.5" SATA)
#771 / 1,679
7
#554 / 1,679
#534 / 984
#107 / 370
6,750
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.sg

Overview
2020-02-06 00:59:58
#8,158
6,983
+233 (+3.34%)
Anonymous

Storage Details
OCZ Agility 2 Series
SSD (2.5" SATA)
55G
SSD
OCZ
AGILITY2
Serial
3.00
5,000
1d6b:a001
0x1d6b (Linux Foundation)
0xa001 (JMS578 based SATA bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
145 MB/s
200.12 MB/s
156.15 MB/s
11,396 IOPS
16,542 IOPS
45,587 KB/s
66,171 KB/s
25,408 KB/s
23,778 KB/s
17,722 KB/s
24,966 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 207.6 MiB (5.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::6cd3:be3e:1894:a5fd/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 72.50.X.X Drives: Local Storage: total: 110.87 GiB used: 1.52 GiB (1.4%) ID-1: /dev/mmcblk0 model: GC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 size: 51.24 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 50.99 GiB size: 50.17 GiB (98.40%) used: 1.47 GiB (2.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0080:a001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.5% command: sshd: pid: 4814 mem: 6.12 MiB (0.1%) 2: cpu: 0.4% command: systemd pid: 4821 mem: 6.38 MiB (0.1%) 3: cpu: 0.4% command: -bash pid: 4843 mem: 3.52 MiB (0.0%) 4: cpu: 0.3% command: bash pid: 4879 mem: 2.76 MiB (0.0%) 5: cpu: 0.1% command: sudo pid: 4874 mem: 3.12 MiB (0.0%) Memory top: 5 1: mem: 7.96 MiB (0.2%) command: systemd-journald pid: 102 cpu: 0.0% 2: mem: 7.75 MiB (0.1%) command: init pid: 1 cpu: 0.0% 3: mem: 6.38 MiB (0.1%) command: systemd pid: 4821 cpu: 0.4% 4: mem: 6.12 MiB (0.1%) command: sshd: pid: 4814 cpu: 0.5% 5: mem: 5.66 MiB (0.1%) command: systemd-logind pid: 332 cpu: 0.0% Info: Processes: 115 Uptime: 3d 8h 43m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: storage.sh (sudo) inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory:    RAM: total: 3.89 GiB used: 207.6 MiB (5.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 
           model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::6cd3:be3e:1894:a5fd/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 72.50.X.X 
Drives:    Local Storage: total: 110.87 GiB used: 1.52 GiB (1.4%) 
           ID-1: /dev/mmcblk0 model: GC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 size: 51.24 GiB block size: physical: 4096 B 
           logical: 512 B rev: 0204 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 50.99 GiB size: 50.17 GiB (98.40%) used: 1.47 GiB (2.9%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 0080:a001 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.5% command: sshd: pid: 4814 mem: 6.12 MiB (0.1%) 
           2: cpu: 0.4% command: systemd pid: 4821 mem: 6.38 MiB (0.1%) 
           3: cpu: 0.4% command: -bash pid: 4843 mem: 3.52 MiB (0.0%) 
           4: cpu: 0.3% command: bash pid: 4879 mem: 2.76 MiB (0.0%) 
           5: cpu: 0.1% command: sudo pid: 4874 mem: 3.12 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.96 MiB (0.2%) command: systemd-journald pid: 102 cpu: 0.0% 
           2: mem: 7.75 MiB (0.1%) command: init pid: 1 cpu: 0.0% 
           3: mem: 6.38 MiB (0.1%) command: systemd pid: 4821 cpu: 0.4% 
           4: mem: 6.12 MiB (0.1%) command: sshd: pid: 4814 cpu: 0.5% 
           5: mem: 5.66 MiB (0.1%) command: systemd-logind pid: 332 cpu: 0.0% 
Info:      Processes: 115 Uptime: 3d 8h 43m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: storage.sh (sudo) inxi: 3.0.37

Benchmark #8158 - Brand: OCZ Agility 2 Series