Benchmark #8246 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,679
1,774
#399 / 1,679
#386 / 984
#44 / 370
7,812
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-07 09:26:32
#8,246
1,444
-6,368 (-441.00%)
ITWegner

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
2.10
480
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
28 MB/s
25.61 MB/s
26.47 MB/s
1,336 IOPS
1,802 IOPS
5,345 KB/s
7,211 KB/s
9,359 KB/s
7,690 KB/s
7,002 KB/s
5,015 KB/s

inxi Results
System: Host: openhab Kernel: 4.19.102-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e7104973-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 991.6 MiB used: 305.6 MiB (30.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.102-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: up mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 111.80 GiB used: 3.97 GiB (3.6%) ID-1: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120 GB size: 111.80 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.75 GiB size: 110.08 GiB (98.51%) used: 3.95 GiB (3.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 ID-2: /boot raw size: 42.9 MiB size: 42.2 MiB (98.43%) used: 22.7 MiB (53.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 16D2-035F Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.2:4 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/zulu.list 1: deb http: //repos.azulsystems.com/debian stable main Processes: CPU top: 5 1: cpu: 196% command: java pid: 534 mem: 224.0 MiB (22.9%) 2: cpu: 8.7% command: [kworker/3:3-mm_] pid: 69 mem: 0.00 MiB (0.0%) 3: cpu: 3.1% command: init pid: 1 mem: 5.86 MiB (0.6%) 4: cpu: 2.4% command: [usb-storage] pid: 72 mem: 0.00 MiB (0.0%) 5: cpu: 1.7% command: -bash pid: 815 mem: 4.06 MiB (0.4%) Memory top: 5 1: mem: 224.0 MiB (22.9%) command: java pid: 534 cpu: 196% 2: mem: 12.8 MiB (1.3%) command: fail2ban-server started by: python3 pid: 674 cpu: 1.5% 3: mem: 11.0 MiB (1.1%) command: packagekitd pid: 1139 cpu: 0.7% 4: mem: 9.81 MiB (1.0%) command: systemd-journald pid: 111 cpu: 1.2% 5: mem: 5.86 MiB (0.6%) command: init pid: 1 cpu: 3.1% Info: Processes: 115 Uptime: 1m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: openhab Kernel: 4.19.102-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=e7104973-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 991.6 MiB used: 305.6 MiB (30.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.102-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 111.80 GiB used: 3.97 GiB (3.6%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120 GB size: 111.80 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.75 GiB size: 110.08 GiB (98.51%) used: 3.95 GiB (3.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 
           ID-2: /boot raw size: 42.9 MiB size: 42.2 MiB (98.43%) used: 22.7 MiB (53.7%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 16D2-035F 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.2:4 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:1153 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
           Active apt repos in: /etc/apt/sources.list.d/zulu.list 
           1: deb http: //repos.azulsystems.com/debian stable main
Processes: CPU top: 5 
           1: cpu: 196% command: java pid: 534 mem: 224.0 MiB (22.9%) 
           2: cpu: 8.7% command: [kworker/3:3-mm_] pid: 69 mem: 0.00 MiB (0.0%) 
           3: cpu: 3.1% command: init pid: 1 mem: 5.86 MiB (0.6%) 
           4: cpu: 2.4% command: [usb-storage] pid: 72 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.7% command: -bash pid: 815 mem: 4.06 MiB (0.4%) 
           Memory top: 5 
           1: mem: 224.0 MiB (22.9%) command: java pid: 534 cpu: 196% 
           2: mem: 12.8 MiB (1.3%) command: fail2ban-server started by: python3 pid: 674 cpu: 1.5% 
           3: mem: 11.0 MiB (1.1%) command: packagekitd pid: 1139 cpu: 0.7% 
           4: mem: 9.81 MiB (1.0%) command: systemd-journald pid: 111 cpu: 1.2% 
           5: mem: 5.86 MiB (0.6%) command: init pid: 1 cpu: 3.1% 
Info:      Processes: 115 Uptime: 1m Init: systemd v: 232 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #8246 - Brand: SanDisk SSD Plus