Benchmark #8278 - pibenchmarks.com

Brand: Yucun N580 NGFF M.2 Series
SSD (M.2 SATA)
#478 / 1,539
12
#695 / 1,539
#666 / 875
#88 / 112
5,158
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2020-02-08 01:23:30
#8,278
4,936
-222 (-4.50%)
ekare

Storage Details
Yucun N580 NGFF M.2 Series
SSD (M.2 SATA)
120G
SSD
Yucun
SH00N120GB
M.2
SATA
3.00
5,000
1d6b:0576
0x1d6b (Linux Foundation)
0x0576
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,000 (+500)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
81.2 MB/s
205.93 MB/s
162.36 MB/s
3,064 IOPS
3,895 IOPS
12,257 KB/s
15,583 KB/s
26,632 KB/s
22,802 KB/s
16,298 KB/s
24,983 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0576:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 929.3 MiB (23.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 118x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 171.27 GiB used: 202.95 GiB (118.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: 1507 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 95.69 GiB (87.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.8 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /mnt raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 11.52 GiB (19.8%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-4: /var/lib/docker/overlay2/5b3b01413c26e0beaa090a0edeabfc02a03182980e22d6e77f7cc01e2da660d2/merged raw size: N/A size: 109.78 GiB used: 95.69 GiB (87.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/100-ubnt-unifi.list 1: deb http: //www.ubnt.com/downloads/unifi/debian stable ubiquiti Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https: //ookla.bintray.com/debian buster main Processes: CPU top: 5 1: cpu: 11.1% command: transmission-daemon pid: 8920 mem: 68.7 MiB (1.7%) 2: cpu: 1.5% command: plex pid: 22947 mem: 49.6 MiB (1.2%) 3: cpu: 1.4% command: java pid: 7533 mem: 307.6 MiB (7.8%) 4: cpu: 1.4% command: jellyfin.dll started by: dotnet pid: 15144 mem: 113.1 MiB (2.8%) 5: cpu: 0.6% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 307.6 MiB (7.8%) command: java pid: 7533 cpu: 1.4% 2: mem: 113.1 MiB (2.8%) command: jellyfin.dll started by: dotnet pid: 15144 cpu: 1.4% 3: mem: 68.7 MiB (1.7%) command: transmission-daemon pid: 8920 cpu: 11.1% 4: mem: 49.6 MiB (1.2%) command: plex pid: 22947 cpu: 1.5% 5: mem: 40.7 MiB (1.0%) command: bin/mongod pid: 7556 cpu: 0.5% Info: Processes: 143 Uptime: 18h 57m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0576:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 929.3 MiB (23.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 
           Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 118x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 171.27 GiB used: 202.95 GiB (118.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL64G size: 59.48 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B rev: 1507 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 95.69 GiB (87.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.8 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /mnt raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 11.52 GiB (19.8%) 
           fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-4: /var/lib/docker/overlay2/5b3b01413c26e0beaa090a0edeabfc02a03182980e22d6e77f7cc01e2da660d2/merged raw size: N/A size: 109.78 GiB used: 95.69 GiB (87.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/100-ubnt-unifi.list 
           1: deb http: //www.ubnt.com/downloads/unifi/debian stable ubiquiti
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
           1: deb https: //ookla.bintray.com/debian buster main
Processes: CPU top: 5 
           1: cpu: 11.1% command: transmission-daemon pid: 8920 mem: 68.7 MiB (1.7%) 
           2: cpu: 1.5% command: plex pid: 22947 mem: 49.6 MiB (1.2%) 
           3: cpu: 1.4% command: java pid: 7533 mem: 307.6 MiB (7.8%) 
           4: cpu: 1.4% command: jellyfin.dll started by: dotnet pid: 15144 mem: 113.1 MiB (2.8%) 
           5: cpu: 0.6% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 307.6 MiB (7.8%) command: java pid: 7533 cpu: 1.4% 
           2: mem: 113.1 MiB (2.8%) command: jellyfin.dll started by: dotnet pid: 15144 cpu: 1.4% 
           3: mem: 68.7 MiB (1.7%) command: transmission-daemon pid: 8920 cpu: 11.1% 
           4: mem: 49.6 MiB (1.2%) command: plex pid: 22947 cpu: 1.5% 
           5: mem: 40.7 MiB (1.0%) command: bin/mongod pid: 7556 cpu: 0.5% 
Info:      Processes: 143 Uptime: 18h 57m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8278 - Brand: Yucun N580 NGFF M.2 Series