Benchmark #8282 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A1 (SP32G)
A1 C10 V30 U3
#61 / 1,679
310
#1,151 / 1,679
#67 / 394
1,613
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-08 03:01:09
#8,282
1,515
-98 (-6.47%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A1 (SP32G)
A1 C10 V30 U3
29.5G
SD
SanDisk
SP32G
SDHC
5.00
0x03
SD
8.0
04/2019
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
32.5 MB/s
39.66 MB/s
33.39 MB/s
1,245 IOPS
3,319 IOPS
4,983 KB/s
13,277 KB/s
10,884 KB/s
2,495 KB/s
9,471 KB/s
4,184 KB/s

inxi Results
System: Host: pi4b Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=daec111d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 1.40 GiB (35.9%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-3: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 991.05 GiB used: 159.30 GiB (16.1%) ID-1: /dev/mmcblk0 vendor: Samsung model: SP32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Fit size: 29.81 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR ID-3: /dev/sdb type: USB vendor: Western Digital model: WD10SPZX-22Z10T1 size: 931.51 GiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: 04.0 scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.99 GiB (98.39%) used: 5.12 GiB (17.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /mnt/hdd raw size: 931.51 GiB size: 915.89 GiB (98.32%) used: 154.07 GiB (16.8%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 7a744c3f-605e-465c-8921-b05e6f1acf06 ID-4: /mnt/sandisk raw size: 29.81 GiB size: 29.80 GiB (99.95%) used: 57.2 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 36E9-8F45 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:4 info: ASMedia ASM1051 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5106 Device-2: 1-1.3:3 info: SanDisk Cruzer Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5571 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/gitlab_raspberry-pi2.list 1: deb https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main 2: deb-src https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 41.8% command: motion pid: 583 mem: 86.0 MiB (2.4%) 2: cpu: 4.2% command: [vchiq-slot/0] pid: 65 mem: 0.00 MiB (0.0%) 3: cpu: 1.7% command: mkdocs started by: python3 pid: 686 mem: 28.4 MiB (0.8%) 4: cpu: 0.8% command: deluged started by: python pid: 10126 mem: 75.4 MiB (2.1%) 5: cpu: 0.6% command: [kworker/u8:0-events_unbound] pid: 28571 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 86.0 MiB (2.4%) command: motion pid: 583 cpu: 41.8% 2: mem: 75.4 MiB (2.1%) command: deluged started by: python pid: 10126 cpu: 0.8% 3: mem: 42.6 MiB (1.2%) command: gunicorn started by: python3 pid: 680 cpu: 0.2% 4: mem: 37.4 MiB (1.0%) command: dockerd pid: 694 cpu: 0.0% 5: mem: 36.2 MiB (1.0%) command: gunicorn started by: python3 pid: 1038 cpu: 0.0% Info: Processes: 194 Uptime: 24d 21h 03m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: pi4b Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=daec111d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 1.40 GiB (35.9%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 991.05 GiB used: 159.30 GiB (16.1%) 
           ID-1: /dev/mmcblk0 vendor: Samsung model: SP32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Fit size: 29.81 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD10SPZX-22Z10T1 
           size: 931.51 GiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm 
           rev: 04.0 scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.99 GiB (98.39%) used: 5.12 GiB (17.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /mnt/hdd raw size: 931.51 GiB size: 915.89 GiB (98.32%) used: 154.07 GiB (16.8%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: 7a744c3f-605e-465c-8921-b05e6f1acf06 
           ID-4: /mnt/sandisk raw size: 29.81 GiB size: 29.80 GiB (99.95%) used: 57.2 MiB (0.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 36E9-8F45 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:4 info: ASMedia ASM1051 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5106 
           Device-2: 1-1.3:3 info: SanDisk Cruzer Fit type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5571 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/gitlab_raspberry-pi2.list 
           1: deb https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main
           2: deb-src https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 41.8% command: motion pid: 583 mem: 86.0 MiB (2.4%) 
           2: cpu: 4.2% command: [vchiq-slot/0] pid: 65 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.7% command: mkdocs started by: python3 pid: 686 mem: 28.4 MiB (0.8%) 
           4: cpu: 0.8% command: deluged started by: python pid: 10126 mem: 75.4 MiB (2.1%) 
           5: cpu: 0.6% command: [kworker/u8:0-events_unbound] pid: 28571 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 86.0 MiB (2.4%) command: motion pid: 583 cpu: 41.8% 
           2: mem: 75.4 MiB (2.1%) command: deluged started by: python pid: 10126 cpu: 0.8% 
           3: mem: 42.6 MiB (1.2%) command: gunicorn started by: python3 pid: 680 cpu: 0.2% 
           4: mem: 37.4 MiB (1.0%) command: dockerd pid: 694 cpu: 0.0% 
           5: mem: 36.2 MiB (1.0%) command: gunicorn started by: python3 pid: 1038 cpu: 0.0% 
Info:      Processes: 194 Uptime: 24d 21h 03m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8282 - Brand: SanDisk SD Extreme Pro A1 (SP32G)