Benchmark #83894 - pibenchmarks.com

Brand: Samsung 860 EVO
SSD (2.5" SATA)
#18 / 1,675
684
#491 / 1,675
#475 / 984
#78 / 370
7,072
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2024-04-05 11:58:57
#83,894
13,166
+6,094 (+46.29%)
Anonymous
Samsung 850 Evo

Storage Details
Samsung 860 EVO
SSD (2.5" SATA)
500G
SSD
Samsung
SSD860EVO500GB
2.5 inch
SATA
3.00
5,000
0080:a001
0x0080 (Unknown)
0xa001 (JMS578 based SATA bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
206 MB/s
362.25 MB/s
348.8 MB/s
32,979 IOPS
40,394 IOPS
131,916 KB/s
161,577 KB/s
41,920 KB/s
43,799 KB/s
21,964 KB/s
44,079 KB/s

inxi Results
System: Host: pi5-srv Kernel: 6.6.20+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=95e7d234-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.86 GiB used: 574.5 MiB (7.1%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: wayfire v: 0.7.5 driver: gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0 Monitor-1: HDMI-A-1 model: Idek Iiyama PL2283H built: 2015 res: 1920x1080 dpi: 98 gamma: 1.2 chroma: red: x: 0.647 y: 0.333 green: x: 0.318 y: 0.631 blue: x: 0.157 y: 0.059 white: x: 0.314 y: 0.329 size: 496x292mm (19.53x11.5") diag: 576mm (22.7") ratio: 15:9 modes: 1920x1080, 1920x1080i, 1600x1200, 1680x1050, 1280x1024, 1440x900, 1280x960, 1152x864, 1280x720, 1152x720, 1024x768, 832x624, 800x600, 720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400 API: EGL Message: EGL data requires eglinfo. Check --recommends. Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.6.20+rpt-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A bus-ID: 01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::7b9d:a2a1:d307:ad20/64 type: noprefixroute scope: link IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::2520:bc21:6f66:841c/64 type: noprefixroute scope: link WAN IP: 109.148.X.X Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 13.28 GiB (2.9%) ID-1: /dev/sda maj-min: 8:0 model: TO Exter nal USB 3.0 drive model: SSD 860 EVO 500GB family: based SSDs size: 465.76 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: SSD drive fw-rev: 0203 drive-rev: RVT01B6Q temp: 20 C scheme: MBR SMART: yes state: enabled health: PASSED on: 38d 9h cycles: 482 written: 2.91 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.26 GiB size: 456.88 GiB (98.20%) used: 13.21 GiB (2.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 063c26d0-665d-497a-ad0f-965d05b228be ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 74.1 MiB (14.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: 3A1A-EC0C Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-2:2 info: Pixart Imaging Optical Mouse type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMS578 based SATA bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0080:a001 class-ID: 0806 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: Holtek Keyboard type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 04d9:1203 class-ID: 0300 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 48.5 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1921 libs: 1062 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.com/debian/ bookworm main Processes: CPU top: 5 of 196 1: cpu: 1.3% command: bash pid: 2047 mem: 2.50 MiB (0.0%) 2: cpu: 0.7% command: sudo pid: 2045 mem: 4.20 MiB (0.0%) 3: cpu: 0.5% command: lxterminal pid: 1983 mem: 41.5 MiB (0.5%) 4: cpu: 0.2% command: pcmanfm pid: 1318 mem: 73.6 MiB (0.9%) 5: cpu: 0.1% command: init pid: 1 mem: 10.4 MiB (0.1%) Memory top: 5 of 196 1: mem: 110.0 MiB (1.3%) command: wayfire pid: 1244 cpu: 0.1% 2: mem: 73.6 MiB (0.9%) command: pcmanfm pid: 1318 cpu: 0.2% 3: mem: 57.0 MiB (0.7%) command: wf-panel-pi pid: 1320 cpu: 0.1% 4: mem: 56.0 MiB (0.6%) command: xdg-desktop-portal-wlr pid: 1421 cpu: 0.0% 5: mem: 41.5 MiB (0.5%) command: lxterminal pid: 1983 cpu: 0.5% Info: Processes: 196 Uptime: 5m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: Bash (sudo) v: 5.2.15 running-in: lxterminal inxi: 3.3.31

inxi Results

System:
  Host: pi5-srv Kernel: 6.6.20+rpt-rpi-2712 arch: aarch64 bits: 64
    compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: reboot=w
    coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000
    vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1
    root=PARTUUID=95e7d234-02 rootfstype=ext4 fsck.repair=yes rootwait quiet
    splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB
  Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.86 GiB used: 574.5 MiB (7.1%)
    igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 4 stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop
    evtstrm fp fphp lrcpc pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9
    compositor: wayfire v: 0.7.5 driver:
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0
  Monitor-1: HDMI-A-1 model: Idek Iiyama PL2283H     built: 2015 res: 1920x1080 dpi: 98 gamma: 1.2 chroma: red: x: 0.647 y: 0.333
    green: x: 0.318 y: 0.631 blue: x: 0.157 y: 0.059 white: x: 0.314 y: 0.329
    size: 496x292mm (19.53x11.5") diag: 576mm (22.7") ratio: 15:9
    modes: 1920x1080, 1920x1080i, 1600x1200, 1680x1050, 1280x1024, 1440x900,
    1280x960, 1152x864, 1280x720, 1152x720, 1024x768, 832x624, 800x600,
    720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.6.20+rpt-rpi-2712 status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse)
    tools: pacat,pactl
Network:
  Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A
    bus-ID: 01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::7b9d:a2a1:d307:ad20/64 type: noprefixroute scope: link
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::2520:bc21:6f66:841c/64 type: noprefixroute scope: link
  WAN IP: 109.148.X.X
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A
    chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX
    bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: peripheral accept service-classes: rendering, capturing, audio,
    telephony
  Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0
    class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 465.76 GiB used: 13.28 GiB (2.9%)
  ID-1: /dev/sda maj-min: 8:0 model: TO Exter nal USB 3.0
    drive model: SSD 860 EVO 500GB family: based SSDs size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s
    lanes: 1 mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: SSD
    drive fw-rev: 0203
    drive-rev: RVT01B6Q temp: 20 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 38d 9h cycles: 482
    written: 2.91 TiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.26 GiB size: 456.88 GiB (98.20%)
    used: 13.21 GiB (2.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2
    maj-min: 8:2 label: rootfs uuid: 063c26d0-665d-497a-ad0f-965d05b228be
  ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%)
    used: 74.1 MiB (14.5%) fs: vfat block-size: 512 B dev: /dev/sda1
    maj-min: 8:1 label: bootfs uuid: 3A1A-EC0C
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2
    file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-2:2 info: Pixart Imaging Optical Mouse type: mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 093a:2510 class-ID: 0301
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: JMS578 based SATA bridge type: mass storage
    driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 power: 896mA chip-ID: 0080:a001 class-ID: 0806
      Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-2:2 info: Holtek Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 04d9:1203 class-ID: 0300
  Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 48.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1921 libs: 1062 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.com/debian/ bookworm main
Processes:
  CPU top: 5 of 196
  1: cpu: 1.3% command: bash pid: 2047 mem: 2.50 MiB (0.0%)
  2: cpu: 0.7% command: sudo pid: 2045 mem: 4.20 MiB (0.0%)
  3: cpu: 0.5% command: lxterminal pid: 1983 mem: 41.5 MiB (0.5%)
  4: cpu: 0.2% command: pcmanfm pid: 1318 mem: 73.6 MiB (0.9%)
  5: cpu: 0.1% command: init pid: 1 mem: 10.4 MiB (0.1%)
  Memory top: 5 of 196
  1: mem: 110.0 MiB (1.3%) command: wayfire pid: 1244 cpu: 0.1%
  2: mem: 73.6 MiB (0.9%) command: pcmanfm pid: 1318 cpu: 0.2%
  3: mem: 57.0 MiB (0.7%) command: wf-panel-pi pid: 1320 cpu: 0.1%
  4: mem: 56.0 MiB (0.6%) command: xdg-desktop-portal-wlr pid: 1421
    cpu: 0.0%
  5: mem: 41.5 MiB (0.5%) command: lxterminal pid: 1983 cpu: 0.5%
Info:
  Processes: 196 Uptime: 5m Init: systemd v: 252 target: graphical (5)
  default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Shell: Bash (sudo) v: 5.2.15 running-in: lxterminal inxi: 3.3.31

Benchmark #83894 - Brand: Samsung 860 EVO