Benchmark #8399 - pibenchmarks.com

Brand: Intenso PortableSSD Series
SSD (Portable)
#161 / 1,700
113
#909 / 1,700
#864 / 989
#123 / 145
4,595
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-10 06:00:52
#8,399
4,822
+227 (+4.71%)
Anonymous

Storage Details
Intenso PortableSSD Series
SSD (Portable)
128G
SSD
Intenso
PortableSSD
2.5 inch
SATA
3.00
5,000
1d6b:0579
0x1d6b (Linux Foundation)
0x0579 (CX7220)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
166 MB/s
193.26 MB/s
181.2 MB/s
3,937 IOPS
3,362 IOPS
15,750 KB/s
13,451 KB/s
18,815 KB/s
17,170 KB/s
12,600 KB/s
17,305 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Host: PiSoleil Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0579:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 908.6 MiB (22.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 80x53 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-661fffbec106 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: eth0 state: down mac: IF-ID-4: veth00f1f53 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth05fa279 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth28081a6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth852efd3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth997a63b state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 134.18 GiB used: 56.67 GiB (42.2%) ID-1: /dev/mmcblk0 model: SD8GB size: 7.42 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD size: 119.24 GiB block size: physical: 512 B logical: 512 B rev: 0506 scheme: MBR ID-3: /dev/sdb type: USB model: SCSI size: 7.52 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 117.07 GiB (98.38%) used: 23.23 GiB (19.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 ID-3: /media/pendrive raw size: 7.52 GiB size: 7.34 GiB (97.60%) used: 4.54 GiB (61.9%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 7f270d00-4c09-42a5-ab23-8672ef6028e1 ID-4: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.7 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9F2D-0578 ID-5: /media/pi/rootfs raw size: 7.17 GiB size: 6.99 GiB (97.55%) used: 5.56 GiB (79.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-6: /var/lib/docker/overlay2/134b63e5bde00da1345a8aef9c2be5cd25c6a589cb81ce7f25c667dd313031af/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/4f7c00608491258e4c64ae07e45bd11c6b8c9486255743e8a197258353219132/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/96f11784d90ebb0e43ba33f0b61434346f018390a447287035c6cf59f665dd9f/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/9fb382b6e11beb2da06ddeb7726f2e387e986cf92d4bc6877a54b934d8d1f4e3/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/a4182caf8631afd379d25f5095e67f631661211a26c44ab566f898c77e1df1c5/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/b630a826cf33c93c943e65601505a1d1274d4c19259b2cfa22bbe6e093327bcd/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 23a9:ef18 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0579 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 14.7% command: python3 pid: 8775 mem: 167.3 MiB (4.2%) 2: cpu: 5.6% command: influxd pid: 3334 mem: 426.8 MiB (10.9%) 3: cpu: 0.6% command: automatic.py started by: python3 pid: 1669 mem: 6.33 MiB (0.1%) 4: cpu: 0.6% command: bash pid: 25124 mem: 2.75 MiB (0.0%) 5: cpu: 0.4% command: [usb-storage] pid: 81 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 426.8 MiB (10.9%) command: influxd pid: 3334 cpu: 5.6% 2: mem: 167.3 MiB (4.2%) command: python3 pid: 8775 cpu: 14.7% 3: mem: 54.2 MiB (1.3%) command: dockerd pid: 444 cpu: 0.3% 4: mem: 43.8 MiB (1.1%) command: xorg pid: 527 cpu: 0.0% 5: mem: 32.6 MiB (0.8%) command: zenity pid: 875 cpu: 0.0% Info: Processes: 192 Uptime: 2d 17h 04m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Host: PiSoleil Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0579:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 908.6 MiB (22.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 80x53 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-661fffbec106 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: eth0 state: down mac:  
           IF-ID-4: veth00f1f53 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth05fa279 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth28081a6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth852efd3 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth997a63b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 134.18 GiB used: 56.67 GiB (42.2%) 
           ID-1: /dev/mmcblk0 model: SD8GB size: 7.42 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B rev: 0506 scheme: MBR 
           ID-3: /dev/sdb type: USB model: SCSI size: 7.52 GiB block size: physical: 512 B 
           logical: 512 B rev: 1.00 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 117.07 GiB (98.38%) used: 23.23 GiB (19.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 
           ID-3: /media/pendrive raw size: 7.52 GiB size: 7.34 GiB (97.60%) used: 4.54 GiB (61.9%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: 7f270d00-4c09-42a5-ab23-8672ef6028e1 
           ID-4: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.7 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 9F2D-0578 
           ID-5: /media/pi/rootfs raw size: 7.17 GiB size: 6.99 GiB (97.55%) 
           used: 5.56 GiB (79.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-6: /var/lib/docker/overlay2/134b63e5bde00da1345a8aef9c2be5cd25c6a589cb81ce7f25c667dd313031af/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/4f7c00608491258e4c64ae07e45bd11c6b8c9486255743e8a197258353219132/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/96f11784d90ebb0e43ba33f0b61434346f018390a447287035c6cf59f665dd9f/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/9fb382b6e11beb2da06ddeb7726f2e387e986cf92d4bc6877a54b934d8d1f4e3/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/a4182caf8631afd379d25f5095e67f631661211a26c44ab566f898c77e1df1c5/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/b630a826cf33c93c943e65601505a1d1274d4c19259b2cfa22bbe6e093327bcd/merged raw size: N/A size: 117.07 GiB used: 23.23 GiB (19.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.0 speed: 480 Mb/s chip ID: 23a9:ef18 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0579 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 14.7% command: python3 pid: 8775 mem: 167.3 MiB (4.2%) 
           2: cpu: 5.6% command: influxd pid: 3334 mem: 426.8 MiB (10.9%) 
           3: cpu: 0.6% command: automatic.py started by: python3 pid: 1669 mem: 6.33 MiB (0.1%) 
           4: cpu: 0.6% command: bash pid: 25124 mem: 2.75 MiB (0.0%) 
           5: cpu: 0.4% command: [usb-storage] pid: 81 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 426.8 MiB (10.9%) command: influxd pid: 3334 cpu: 5.6% 
           2: mem: 167.3 MiB (4.2%) command: python3 pid: 8775 cpu: 14.7% 
           3: mem: 54.2 MiB (1.3%) command: dockerd pid: 444 cpu: 0.3% 
           4: mem: 43.8 MiB (1.1%) command: xorg pid: 527 cpu: 0.0% 
           5: mem: 32.6 MiB (0.8%) command: zenity pid: 875 cpu: 0.0% 
Info:      Processes: 192 Uptime: 2d 17h 04m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #8399 - Brand: Intenso PortableSSD Series