Benchmark #8469 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,679
1,788
#384 / 1,679
#371 / 984
#39 / 370
7,939
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-11 14:53:42
#8,469
2,144
-5,795 (-270.29%)
tobi
sandisk

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
63.4 MB/s
201.08 MB/s
224.04 MB/s
1,304 IOPS
11,669 IOPS
5,219 KB/s
46,678 KB/s
8,988 KB/s
4,279 KB/s
8,891 KB/s
4,138 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 267.0 MiB (6.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 4.21 TiB used: 2.06 TiB (48.8%) ID-1: /dev/mmcblk0 model: SD16G size: 7.45 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.79 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-3: /dev/sdb type: USB vendor: Western Digital model: WD30EFRX-68EUZN0 size: 2.73 TiB block size: physical: 4096 B logical: 512 B rotation: 5400 rpm ID-4: /dev/sdc type: USB vendor: Samsung model: HD154UI size: 1.36 TiB block size: physical: 512 B logical: 512 B Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.76 GiB size: 109.50 GiB (97.98%) used: 7.40 GiB (6.8%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: ea9e749d-e913-421f-829f-6ab99e2d75ca ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 155.4 MiB (61.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/main raw size: 2.73 TiB size: 2.69 TiB (98.43%) used: 2.05 TiB (76.3%) fs: ext4 block size: 4096 B dev: /dev/sdb label: N/A uuid: ac25c1d1-93fd-4fc7-9ef8-cd8b7033cf6c Unmounted: ID-1: /dev/mmcblk0p2 size: 7.19 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 1-1.1.1:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-1:2 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0616 Hub: 2-1.1:4 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0616 Device-1: 2-1.3:5 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-2: 2-1.4:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-3: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: init pid: 1 mem: 8.00 MiB (0.2%) 2: cpu: 0.2% command: smartd pid: 1387 mem: 3.38 MiB (0.0%) 3: cpu: 0.1% command: systemd-journald pid: 111 mem: 6.98 MiB (0.1%) 4: cpu: 0.1% command: systemd-udevd pid: 147 mem: 3.69 MiB (0.0%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 30.3 MiB (0.7%) command: containerd pid: 483 cpu: 0.0% 2: mem: 15.6 MiB (0.4%) command: smbd pid: 513 cpu: 0.0% 3: mem: 8.89 MiB (0.2%) command: nmbd pid: 482 cpu: 0.0% 4: mem: 8.00 MiB (0.2%) command: init pid: 1 cpu: 0.7% 5: mem: 6.98 MiB (0.1%) command: systemd-journald pid: 111 cpu: 0.1% Info: Processes: 117 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 267.0 MiB (6.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 4.21 TiB used: 2.06 TiB (48.8%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 7.45 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD30EFRX-68EUZN0 size: 2.73 TiB 
           block size: physical: 4096 B logical: 512 B rotation: 5400 rpm ID-4: /dev/sdc type: USB vendor: Samsung model: HD154UI size: 1.36 TiB block size: 
           physical: 512 B logical: 512 B Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.76 GiB size: 109.50 GiB (97.98%) used: 7.40 GiB (6.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: ea9e749d-e913-421f-829f-6ab99e2d75ca 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 155.4 MiB (61.6%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/main raw size: 2.73 TiB size: 2.69 TiB (98.43%) used: 2.05 TiB (76.3%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb label: N/A 
           uuid: ac25c1d1-93fd-4fc7-9ef8-cd8b7033cf6c 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.19 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 1-1.1.1:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-1:2 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0616 
           Hub: 2-1.1:4 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0616 
           Device-1: 2-1.3:5 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Device-2: 2-1.4:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Device-3: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: init pid: 1 mem: 8.00 MiB (0.2%) 
           2: cpu: 0.2% command: smartd pid: 1387 mem: 3.38 MiB (0.0%) 
           3: cpu: 0.1% command: systemd-journald pid: 111 mem: 6.98 MiB (0.1%) 
           4: cpu: 0.1% command: systemd-udevd pid: 147 mem: 3.69 MiB (0.0%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 30.3 MiB (0.7%) command: containerd pid: 483 cpu: 0.0% 
           2: mem: 15.6 MiB (0.4%) command: smbd pid: 513 cpu: 0.0% 
           3: mem: 8.89 MiB (0.2%) command: nmbd pid: 482 cpu: 0.0% 
           4: mem: 8.00 MiB (0.2%) command: init pid: 1 cpu: 0.7% 
           5: mem: 6.98 MiB (0.1%) command: systemd-journald pid: 111 cpu: 0.1% 
Info:      Processes: 117 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8469 - Brand: SanDisk SSD Plus