Benchmark #8651 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
#15 / 1,679
772
#1,164 / 1,679
#76 / 394
1,567
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-15 05:45:41
#8,651
1,178
-389 (-33.02%)
Anonymous
Sandisk 64GB SD

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
29.7G
SD
SanDisk
SN64G
SDXC
6.00
0x03
SD
8.0
04/2019
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,000 (+500)
600 (+100)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.6 MB/s
36.12 MB/s
27.83 MB/s
829 IOPS
2,319 IOPS
3,316 KB/s
9,277 KB/s
8,368 KB/s
2,131 KB/s
6,469 KB/s
3,217 KB/s

inxi Results
System: Host: PROXY Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=ef72cb2d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 747.1 MiB (37.1%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 479 Speed: 667 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 667 2: 667 3: 667 4: 667 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 143x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v4: virtual: secondary eth0:1 scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 4.66 TiB used: 4.19 TiB (89.8%) ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra size: 57.30 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR ID-3: /dev/sdb type: USB vendor: Western Digital model: WD My Passport 2627 size: 4.55 TiB block size: physical: 4096 B logical: 512 B rev: 4008 scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.68 GiB size: 29.20 GiB (98.38%) used: 3.99 GiB (13.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 90a83158-560d-48ee-9de9-40c51d93c287 ID-2: /boot raw size: 297.0 MiB size: 296.4 MiB (99.80%) used: 56.1 MiB (18.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 7E17-6D67 ID-3: /media/5tb raw size: 4.55 TiB size: 4.51 TiB (99.19%) used: 4.18 TiB (92.7%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: d46f8232-55ea-4d40-b02f-951fc8690445 Unmounted: ID-1: /dev/sda1 size: 57.30 GiB fs: ext4 label: N/A uuid: 97e6911b-41fd-4a1d-9c9d-d69e3ff0ab3b USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: SanDisk Ultra type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:5581 Device-2: 2-2:3 info: Western Digital type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2627 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/zulu.list 1: deb http: //repos.azulsystems.com/debian stable main Processes: CPU top: 5 1: cpu: 4.7% command: java pid: 588 mem: 294.7 MiB (14.8%) 2: cpu: 0.6% command: smbd pid: 5021 mem: 13.7 MiB (0.6%) 3: cpu: 0.2% command: sshd: pid: 9054 mem: 6.11 MiB (0.3%) 4: cpu: 0.2% command: systemd pid: 9068 mem: 6.68 MiB (0.3%) 5: cpu: 0.2% command: sshd: pid: 9089 mem: 5.57 MiB (0.2%) Memory top: 5 1: mem: 294.7 MiB (14.8%) command: java pid: 588 cpu: 4.7% 2: mem: 63.3 MiB (3.1%) command: pihole-ftl pid: 1204 cpu: 0.0% 3: mem: 13.7 MiB (0.6%) command: smbd pid: 5021 cpu: 0.6% 4: mem: 12.7 MiB (0.6%) command: packagekitd pid: 9382 cpu: 0.2% 5: mem: 7.43 MiB (0.3%) command: php-cgi pid: 1044 cpu: 0.0% Info: Processes: 147 Uptime: 2d 20h 18m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: PROXY Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=ef72cb2d-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 747.1 MiB (37.1%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 479 
           Speed: 667 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 667 2: 667 3: 667 4: 667 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 143x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v4:  virtual: secondary eth0:1 scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 4.66 TiB used: 4.19 TiB (89.8%) 
           ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra size: 57.30 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD My Passport 2627 
           size: 4.55 TiB block size: physical: 4096 B logical: 512 B rev: 4008 
           scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.68 GiB size: 29.20 GiB (98.38%) used: 3.99 GiB (13.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 90a83158-560d-48ee-9de9-40c51d93c287 
           ID-2: /boot raw size: 297.0 MiB size: 296.4 MiB (99.80%) used: 56.1 MiB (18.9%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 7E17-6D67 
           ID-3: /media/5tb raw size: 4.55 TiB size: 4.51 TiB (99.19%) used: 4.18 TiB (92.7%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: d46f8232-55ea-4d40-b02f-951fc8690445 
Unmounted: ID-1: /dev/sda1 size: 57.30 GiB fs: ext4 label: N/A 
           uuid: 97e6911b-41fd-4a1d-9c9d-d69e3ff0ab3b 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: SanDisk Ultra type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:5581 Device-2: 2-2:3 info: Western Digital type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2627 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/zulu.list 
           1: deb http: //repos.azulsystems.com/debian stable main
Processes: CPU top: 5 
           1: cpu: 4.7% command: java pid: 588 mem: 294.7 MiB (14.8%) 
           2: cpu: 0.6% command: smbd pid: 5021 mem: 13.7 MiB (0.6%) 
           3: cpu: 0.2% command: sshd: pid: 9054 mem: 6.11 MiB (0.3%) 
           4: cpu: 0.2% command: systemd pid: 9068 mem: 6.68 MiB (0.3%) 
           5: cpu: 0.2% command: sshd: pid: 9089 mem: 5.57 MiB (0.2%) 
           Memory top: 5 
           1: mem: 294.7 MiB (14.8%) command: java pid: 588 cpu: 4.7% 
           2: mem: 63.3 MiB (3.1%) command: pihole-ftl pid: 1204 cpu: 0.0% 
           3: mem: 13.7 MiB (0.6%) command: smbd pid: 5021 cpu: 0.6% 
           4: mem: 12.7 MiB (0.6%) command: packagekitd pid: 9382 cpu: 0.2% 
           5: mem: 7.43 MiB (0.3%) command: php-cgi pid: 1044 cpu: 0.0% 
Info:      Processes: 147 Uptime: 2d 20h 18m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #8651 - Brand: SanDisk SD Extreme A2 (SN64G)