Benchmark #8675 - pibenchmarks.com

Brand: PNY SD High Performance (SD08G)
C10 U1
#389 / 1,672
25
#1,521 / 1,672
#324 / 389
632
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-15 10:51:17
#8,675
585
-47 (-8.03%)
Anonymous
8GB MicroSD on Pi 4

Secure Digital (SD) Card Details
PNY SD High Performance (SD08G)
C10 U1
7.2G
SD
PNY
SD08G
SDHC
3.00
0x27
PH
3.0
09/2014
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
2 GB
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
14.2 MB/s
37.29 MB/s
33.13 MB/s
31 IOPS
2,262 IOPS
127 KB/s
9,050 KB/s
7,495 KB/s
1,369 KB/s
6,072 KB/s
169 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 464.9 MiB (23.0%) gpu: 320.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::d3c0:66fa:9c6:c6b3/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 82.169.X.X Drives: Local Storage: total: 126.66 GiB used: 1.93 GiB (1.5%) ID-1: /dev/mmcblk0 model: SD08G size: 7.42 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: External USB3.0 size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.17 GiB size: 7.02 GiB (98.00%) used: 1.88 GiB (26.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.4 MiB (20.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/sda1 size: 529.0 MiB fs: ntfs label: Herstel uuid: 2AAC88E0AC88A7C1 ID-2: /dev/sda2 size: 99.0 MiB fs: vfat label: N/A uuid: 9C8A-A098 ID-3: /dev/sda3 size: 16.0 MiB fs: N/A label: N/A uuid: N/A ID-4: /dev/sda4 size: 118.61 GiB fs: ntfs label: SanDisk 128GB SSD uuid: 24B09703B096DB1E USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.1% command: [kworker/0:1h-mmc_complete] pid: 77 mem: 0.00 MiB (0.0%) 2: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 6529 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: bash pid: 6578 mem: 2.72 MiB (0.1%) 4: cpu: 0.0% command: init pid: 1 mem: 7.96 MiB (0.4%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 15.9 MiB (0.9%) command: smbd pid: 519 cpu: 0.0% 2: mem: 9.10 MiB (0.5%) command: nmbd pid: 513 cpu: 0.0% 3: mem: 7.96 MiB (0.4%) command: init pid: 1 cpu: 0.0% 4: mem: 7.22 MiB (0.4%) command: systemd-journald pid: 112 cpu: 0.0% 5: mem: 6.59 MiB (0.3%) command: systemd pid: 6399 cpu: 0.0% Info: Processes: 125 Uptime: 2h 55m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.37

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait 
  Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 
  rev: b03111 
Memory:
  RAM: total: 1.97 GiB used: 464.9 MiB (23.0%) gpu: 320.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: No display server data found. Headless machine? 
  tty: 80x24 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.75-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fe80::d3c0:66fa:9c6:c6b3/64 scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 82.169.X.X 
Drives:
  Local Storage: total: 126.66 GiB used: 1.93 GiB (1.5%) 
  ID-1: /dev/mmcblk0 model: SD08G size: 7.42 GiB block size: physical: 512 B 
  logical: 512 B scheme: MBR 
  ID-2: /dev/sda type: USB model: External USB3.0 size: 119.24 GiB 
  block size: physical: 4096 B logical: 512 B 
  rev: 0204 scheme: GPT 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 7.17 GiB size: 7.02 GiB (98.00%) used: 1.88 GiB (26.7%) 
  fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
  uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 52.4 MiB (20.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 5203-DB74 
Unmounted:
  ID-1: /dev/sda1 size: 529.0 MiB fs: ntfs label: Herstel 
  uuid: 2AAC88E0AC88A7C1 
  ID-2: /dev/sda2 size: 99.0 MiB fs: vfat label: N/A uuid: 9C8A-A098 
  ID-3: /dev/sda3 size: 16.0 MiB fs: N/A label: N/A uuid: N/A 
  ID-4: /dev/sda4 size: 118.61 GiB fs: ntfs label: SanDisk 128GB SSD 
  uuid: 24B09703B096DB1E 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
  type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
  chip ID: 152d:0578 
  Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 0.1% command: [kworker/0:1h-mmc_complete] pid: 77 
  mem: 0.00 MiB (0.0%) 
  2: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 6529 
  mem: 0.00 MiB (0.0%) 
  3: cpu: 0.1% command: bash pid: 6578 mem: 2.72 MiB (0.1%) 
  4: cpu: 0.0% command: init pid: 1 mem: 7.96 MiB (0.4%) 
  5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 15.9 MiB (0.9%) command: smbd pid: 519 cpu: 0.0% 
  2: mem: 9.10 MiB (0.5%) command: nmbd pid: 513 cpu: 0.0% 
  3: mem: 7.96 MiB (0.4%) command: init pid: 1 cpu: 0.0% 
  4: mem: 7.22 MiB (0.4%) command: systemd-journald pid: 112 cpu: 0.0% 
  5: mem: 6.59 MiB (0.3%) command: systemd pid: 6399 cpu: 0.0% 
Info:
  Processes: 125 Uptime: 2h 55m Init: systemd v: 241 runlevel: 5 Compilers: 
  gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.37

Benchmark #8675 - Brand: PNY SD High Performance (SD08G)