Benchmark #8779 - pibenchmarks.com

Brand: eVtran V03S SLC Series
USB Flash
#868 / 1,679
5
#1,168 / 1,679
#19 / 94
#20 / 89
1,556

Overview
2020-02-16 04:53:34
#8,779
760
-796 (-104.74%)
snow
eVtran V03S SLC USB3.0 8GB FlashDisk

Storage Details
eVtran V03S SLC Series
USB Flash
7.8G
USB Flash
eVtran
V03SSLC
2.10
480
1f75:0903
0x1f75 (Innostor Technology Corporation)
0x0903 (ClickSmart 820)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
23.2 MB/s
29.53 MB/s
27.25 MB/s
92 IOPS
1,426 IOPS
369 KB/s
5,707 KB/s
12,987 KB/s
7,753 KB/s
5,462 KB/s
325 KB/s

inxi Results
System: Host: domoticz Kernel: 4.19.93-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=5eb56036-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.0 MiB used: 479.4 MiB (47.8%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 7.78 GiB used: 3.16 GiB (40.6%) ID-1: /dev/sda type: USB model: eVtran V03S SLC size: 7.78 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.73 GiB size: 7.58 GiB (98.08%) used: 3.14 GiB (41.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 9a7608bd-5bff-4dfc-ac1d-63a956744162 ID-2: /boot raw size: 41.8 MiB size: 41.1 MiB (98.42%) used: 22.6 MiB (55.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: B60A-B262 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:4 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Device-3: 1-1.4:5 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1f75:0903 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi 2: deb http: //www.e-nef.com/domoticz/mdah/ / Active apt repos in: /etc/apt/sources.list.d/mosquitto-stretch.list 1: deb https: //repo.mosquitto.org/debian stretch main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_8.x stretch main 2: deb-src https: //deb.nodesource.com/node_8.x stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 5.8% command: monitor.sh started by: bash pid: 21052 mem: 2.82 MiB (0.3%) 2: cpu: 5.4% command: domoticz pid: 8194 mem: 45.6 MiB (4.8%) 3: cpu: 2.7% command: apps.plugin pid: 896 mem: 2.96 MiB (0.3%) 4: cpu: 2.6% command: [kworker/3:0-eve] pid: 25486 mem: 0.00 MiB (0.0%) 5: cpu: 2.0% command: homebridge pid: 1911 mem: 46.3 MiB (4.9%) Memory top: 5 1: mem: 75.0 MiB (7.9%) command: node-red pid: 31511 cpu: 0.2% 2: mem: 46.3 MiB (4.9%) command: homebridge pid: 1911 cpu: 2.0% 3: mem: 45.6 MiB (4.8%) command: domoticz pid: 8194 cpu: 5.4% 4: mem: 37.2 MiB (3.9%) command: pm2 pid: 1756 cpu: 0.1% 5: mem: 31.7 MiB (3.3%) command: netdata pid: 1029 cpu: 1.2% Info: Processes: 168 Uptime: 32d 22h 38m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: domoticz Kernel: 4.19.93-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=5eb56036-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.0 MiB used: 479.4 MiB (47.8%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x40 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 7.78 GiB used: 3.16 GiB (40.6%) 
           ID-1: /dev/sda type: USB model: eVtran V03S SLC size: 7.78 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.73 GiB size: 7.58 GiB (98.08%) used: 3.14 GiB (41.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 9a7608bd-5bff-4dfc-ac1d-63a956744162 
           ID-2: /boot raw size: 41.8 MiB size: 41.1 MiB (98.42%) used: 22.6 MiB (55.0%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: B60A-B262 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.3:4 info: QinHeng HL-340 USB-Serial adapter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Device-3: 1-1.4:5 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 1f75:0903 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           2: deb http: //www.e-nef.com/domoticz/mdah/ /
           Active apt repos in: /etc/apt/sources.list.d/mosquitto-stretch.list 
           1: deb https: //repo.mosquitto.org/debian stretch main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_8.x stretch main
           2: deb-src https: //deb.nodesource.com/node_8.x stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 5.8% command: monitor.sh started by: bash pid: 21052 mem: 2.82 MiB (0.3%) 
           2: cpu: 5.4% command: domoticz pid: 8194 mem: 45.6 MiB (4.8%) 
           3: cpu: 2.7% command: apps.plugin pid: 896 mem: 2.96 MiB (0.3%) 
           4: cpu: 2.6% command: [kworker/3:0-eve] pid: 25486 mem: 0.00 MiB (0.0%) 
           5: cpu: 2.0% command: homebridge pid: 1911 mem: 46.3 MiB (4.9%) 
           Memory top: 5 
           1: mem: 75.0 MiB (7.9%) command: node-red pid: 31511 cpu: 0.2% 
           2: mem: 46.3 MiB (4.9%) command: homebridge pid: 1911 cpu: 2.0% 
           3: mem: 45.6 MiB (4.8%) command: domoticz pid: 8194 cpu: 5.4% 
           4: mem: 37.2 MiB (3.9%) command: pm2 pid: 1756 cpu: 0.1% 
           5: mem: 31.7 MiB (3.3%) command: netdata pid: 1029 cpu: 1.2% 
Info:      Processes: 168 Uptime: 32d 22h 38m Init: systemd v: 232 runlevel: 5 Compilers: 
           gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #8779 - Brand: eVtran V03S SLC Series