Benchmark #8790 - pibenchmarks.com

Brand: SanDisk SD Extreme (SE16G)
C10 U3
#283 / 1,539
31
#1,129 / 1,539
#132 / 369
1,259
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-16 05:28:24
#8,790
1,058
-201 (-19.00%)
ABO
Pi 4 with 4 GB RAM and SanDisk Extrem and Log2RAM (512 MB)

Secure Digital (SD) Card Details
SanDisk SD Extreme (SE16G)
C10 U3
11.9G
SD
SanDisk
SE16G
SDHC
4.00
0x03
SD
8.0
12/2015
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
250 (-250)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
16.7 MB/s
41.2 MB/s
40.59 MB/s
596 IOPS
3,361 IOPS
2,384 KB/s
13,447 KB/s
9,554 KB/s
2,094 KB/s
9,962 KB/s
1,854 KB/s

inxi Results
System: Host: RaPi4 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 520.1 MiB (13.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 197x66 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.40.X.X/24 type: noprefixroute scope: global broadcast: 10.40.X.X IP v6: fd00:3631:c4ff:fece:c24:9420:4ee:e180/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2a0a:a541:7f73:0:d1d1:1b5e:9d90:2d7b/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::7fa6:9875:f9c8:7642/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 14.84 GiB used: 9.58 GiB (64.6%) ID-1: /dev/mmcblk0 model: SE16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 11.90 GiB size: 11.65 GiB (97.90%) used: 9.53 GiB (81.8%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Atmel LUFA USB to Serial Adapter Project type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 03eb:204b Device-2: 1-1.4:4 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.0% command: perl pid: 646 mem: 55.7 MiB (1.4%) 2: cpu: 0.3% command: xorg pid: 607 mem: 57.3 MiB (1.4%) 3: cpu: 0.3% command: pihole-ftl pid: 2327 mem: 101.2 MiB (2.5%) 4: cpu: 0.2% command: pi-greeter pid: 691 mem: 72.6 MiB (1.8%) 5: cpu: 0.2% command: sshd: pid: 4886 mem: 6.15 MiB (0.1%) Memory top: 5 1: mem: 101.2 MiB (2.5%) command: pihole-ftl pid: 2327 cpu: 0.3% 2: mem: 72.6 MiB (1.8%) command: pi-greeter pid: 691 cpu: 0.2% 3: mem: 57.3 MiB (1.4%) command: xorg pid: 607 cpu: 0.3% 4: mem: 55.7 MiB (1.4%) command: perl pid: 646 cpu: 1.0% 5: mem: 50.8 MiB (1.3%) command: perl pid: 5414 cpu: 0.1% Info: Processes: 165 Uptime: 1h 29m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Strorage.sh (sudo) inxi: 3.0.37

inxi Results

System:    Host: RaPi4 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 520.1 MiB (13.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 197x66 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 10.40.X.X/24 type: noprefixroute scope: global broadcast: 10.40.X.X 
           IP v6: fd00:3631:c4ff:fece:c24:9420:4ee:e180/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: 2a0a:a541:7f73:0:d1d1:1b5e:9d90:2d7b/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::7fa6:9875:f9c8:7642/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 14.84 GiB used: 9.58 GiB (64.6%) 
           ID-1: /dev/mmcblk0 model: SE16G size: 14.84 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 11.90 GiB size: 11.65 GiB (97.90%) used: 9.53 GiB (81.8%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Atmel LUFA USB to Serial Adapter Project type: Abstract (modem),CDC-Data driver: cdc_acm 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 03eb:204b 
           Device-2: 1-1.4:4 info: QinHeng HL-340 USB-Serial adapter type:  driver: ch341,ch341-uart 
           interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.0% command: perl pid: 646 mem: 55.7 MiB (1.4%) 
           2: cpu: 0.3% command: xorg pid: 607 mem: 57.3 MiB (1.4%) 
           3: cpu: 0.3% command: pihole-ftl pid: 2327 mem: 101.2 MiB (2.5%) 
           4: cpu: 0.2% command: pi-greeter pid: 691 mem: 72.6 MiB (1.8%) 
           5: cpu: 0.2% command: sshd: pid: 4886 mem: 6.15 MiB (0.1%) 
           Memory top: 5 
           1: mem: 101.2 MiB (2.5%) command: pihole-ftl pid: 2327 cpu: 0.3% 
           2: mem: 72.6 MiB (1.8%) command: pi-greeter pid: 691 cpu: 0.2% 
           3: mem: 57.3 MiB (1.4%) command: xorg pid: 607 cpu: 0.3% 
           4: mem: 55.7 MiB (1.4%) command: perl pid: 646 cpu: 1.0% 
           5: mem: 50.8 MiB (1.3%) command: perl pid: 5414 cpu: 0.1% 
Info:      Processes: 165 Uptime: 1h 29m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Strorage.sh (sudo) inxi: 3.0.37

Benchmark #8790 - Brand: SanDisk SD Extreme (SE16G)