Benchmark #8811 - pibenchmarks.com

Brand: Strontium SD (SD)
A1 C10 V10 U1
#699 / 1,679
9
#1,394 / 1,679
#250 / 394
1,055
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-16 06:27:09
#8,811
892
-163 (-18.27%)
Anonymous
r

Secure Digital (SD) Card Details
Strontium SD (SD)
A1 C10 V10 U1
29.2G
SD
Strontium
SD
SDHC
5.00
0x96
DE
1.0
09/2019
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
11.7 MB/s
21.96 MB/s
21.94 MB/s
635 IOPS
2,350 IOPS
2,542 KB/s
9,402 KB/s
8,603 KB/s
2,402 KB/s
6,980 KB/s
2,335 KB/s

inxi Results
System: Host: DietPi Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 991.6 MiB used: 136.8 MiB (13.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 67x69 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-1: br-7aa3399d6c9a state: down mac: IP v4: scope: global broadcast: IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: WAN IP: Drives: Local Storage: total: 29.44 GiB used: 3.00 GiB (10.2%) ID-1: /dev/mmcblk0 model: SD size: 29.44 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.18 GiB size: 28.70 GiB (98.35%) used: 2.95 GiB (10.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 0.1% command: dockerd pid: 683 mem: 59.6 MiB (6.1%) 2: cpu: 0.1% command: dropbear pid: 1322 mem: 2.66 MiB (0.2%) 3: cpu: 0.1% command: -bash pid: 1323 mem: 5.81 MiB (0.5%) 4: cpu: 0.0% command: init pid: 1 mem: 7.70 MiB (0.7%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 59.6 MiB (6.1%) command: dockerd pid: 683 cpu: 0.1% 2: mem: 30.2 MiB (3.0%) command: containerd pid: 403 cpu: 0.0% 3: mem: 7.70 MiB (0.7%) command: init pid: 1 cpu: 0.0% 4: mem: 6.27 MiB (0.6%) command: systemd-journald pid: 108 cpu: 0.0% 5: mem: 5.81 MiB (0.5%) command: -bash pid: 1323 cpu: 0.1% Info: Processes: 95 Uptime: 2h 55m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: DietPi Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 991.6 MiB used: 136.8 MiB (13.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 67x69 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: br-7aa3399d6c9a state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 29.44 GiB used: 3.00 GiB (10.2%) 
           ID-1: /dev/mmcblk0 model: SD size: 29.44 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.18 GiB size: 28.70 GiB (98.35%) used: 2.95 GiB (10.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 0.1% command: dockerd pid: 683 mem: 59.6 MiB (6.1%) 
           2: cpu: 0.1% command: dropbear pid: 1322 mem: 2.66 MiB (0.2%) 
           3: cpu: 0.1% command: -bash pid: 1323 mem: 5.81 MiB (0.5%) 
           4: cpu: 0.0% command: init pid: 1 mem: 7.70 MiB (0.7%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 59.6 MiB (6.1%) command: dockerd pid: 683 cpu: 0.1% 
           2: mem: 30.2 MiB (3.0%) command: containerd pid: 403 cpu: 0.0% 
           3: mem: 7.70 MiB (0.7%) command: init pid: 1 cpu: 0.0% 
           4: mem: 6.27 MiB (0.6%) command: systemd-journald pid: 108 cpu: 0.0% 
           5: mem: 5.81 MiB (0.5%) command: -bash pid: 1323 cpu: 0.1% 
Info:      Processes: 95 Uptime: 2h 55m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8811 - Brand: Strontium SD (SD)