Benchmark #8918 - pibenchmarks.com

Brand: SanDisk Ultra CZ48 USB
USB Flash
#53 / 1,700
346
#1,419 / 1,700
#39 / 94
#40 / 89
1,042
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-16 13:22:52
#8,918
1,124
+82 (+7.30%)
Anonymous
Usb3.0 stick on Pi 3

Storage Details
SanDisk Ultra CZ48 USB
USB Flash
28.6G
USB Flash
SanDisk
Ultra
2.10
480
0781:5590
0x0781 (SanDisk Corp.)
0x5590 (Ultra Dual)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
900 (-500)
400
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
25.5 MB/s
24.39 MB/s
20.35 MB/s
831 IOPS
1,460 IOPS
3,327 KB/s
5,840 KB/s
11,251 KB/s
4,450 KB/s
5,870 KB/s
3,353 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=ac7fd7d0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 239.2 MiB (23.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 230 Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 41x22 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: ip_vti0 state: down mac: IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: flags 800 scope: link IF-ID-3: wlan0 state: up mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 28.64 GiB used: 2.03 GiB (7.1%) ID-1: /dev/sda type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.59 GiB size: 28.13 GiB (98.37%) used: 2.01 GiB (7.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9304-D9FD Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.2:4 info: SanDisk Ultra Dual type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5590 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 6.1% command: [kworker/3:0+eve] pid: 9162 mem: 0.00 MiB (0.0%) 2: cpu: 3.3% command: [kworker/3:2-eve] pid: 9105 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: [kworker/3:1-eve] pid: 9109 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: sshd: pid: 9251 mem: 5.68 MiB (0.6%) 5: cpu: 0.4% command: -bash pid: 9270 mem: 4.27 MiB (0.4%) Memory top: 5 1: mem: 39.3 MiB (4.2%) command: php-cgi pid: 903 cpu: 0.0% 2: mem: 23.5 MiB (2.5%) command: php-cgi pid: 904 cpu: 0.0% 3: mem: 21.2 MiB (2.2%) command: pihole-ftl pid: 959 cpu: 0.1% 4: mem: 18.1 MiB (1.9%) command: php-cgi pid: 847 cpu: 0.0% 5: mem: 15.5 MiB (1.6%) command: fail2ban-server started by: python3 pid: 927 cpu: 0.0% Info: Processes: 122 Uptime: 11d 53m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=ac7fd7d0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 239.2 MiB (23.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 230 
           Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 41x22 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: ip_vti0 state: down mac:  
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: flags 800 scope: link 
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 28.64 GiB used: 2.03 GiB (7.1%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.59 GiB size: 28.13 GiB (98.37%) used: 2.01 GiB (7.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc 
           ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.3 MiB (51.7%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 9304-D9FD 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.2:4 info: SanDisk Ultra Dual type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5590 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 6.1% command: [kworker/3:0+eve] pid: 9162 mem: 0.00 MiB (0.0%) 
           2: cpu: 3.3% command: [kworker/3:2-eve] pid: 9105 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: [kworker/3:1-eve] pid: 9109 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: sshd: pid: 9251 mem: 5.68 MiB (0.6%) 
           5: cpu: 0.4% command: -bash pid: 9270 mem: 4.27 MiB (0.4%) 
           Memory top: 5 
           1: mem: 39.3 MiB (4.2%) command: php-cgi pid: 903 cpu: 0.0% 
           2: mem: 23.5 MiB (2.5%) command: php-cgi pid: 904 cpu: 0.0% 
           3: mem: 21.2 MiB (2.2%) command: pihole-ftl pid: 959 cpu: 0.1% 
           4: mem: 18.1 MiB (1.9%) command: php-cgi pid: 847 cpu: 0.0% 
           5: mem: 15.5 MiB (1.6%) command: fail2ban-server started by: python3 pid: 927 cpu: 0.0% 
Info:      Processes: 122 Uptime: 11d 53m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #8918 - Brand: SanDisk Ultra CZ48 USB