Benchmark #8927 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
#20 / 1,675
645
#1,280 / 1,675
#163 / 391
1,261
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-16 14:37:59
#8,927
1,229
-32 (-2.60%)
Anonymous
SanDisk Ultra 64GB Class 10 U1 A1 on Pi 4

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
59.2G
SD
SanDisk
SC64G
SDXC
5.00
0x03
SD
8.0
10/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
19.5 MB/s
39.29 MB/s
40 MB/s
821 IOPS
3,339 IOPS
3,287 KB/s
13,357 KB/s
10,190 KB/s
3,862 KB/s
10,149 KB/s
2,726 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1200M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 347.1 MiB (8.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 177x41 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: down mac: IF-ID-3: usb0 state: down mac: IF-ID-4: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 59.48 GiB used: 9.63 GiB (16.2%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.24 GiB (98.33%) used: 9.58 GiB (16.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.1.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 Device-2: 1-1.1.4:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.4% command: [kworker/u8:0-events_unbound] pid: 2849 mem: 0.00 MiB (0.0%) 2: cpu: 0.9% command: lxpanel pid: 908 mem: 28.1 MiB (0.7%) 3: cpu: 0.6% command: init pid: 1 mem: 8.15 MiB (0.2%) 4: cpu: 0.3% command: xorg pid: 537 mem: 45.4 MiB (1.1%) 5: cpu: 0.3% command: packagekitd pid: 3067 mem: 12.4 MiB (0.3%) Memory top: 5 1: mem: 59.8 MiB (1.5%) command: dockerd pid: 475 cpu: 0.2% 2: mem: 45.4 MiB (1.1%) command: xorg pid: 537 cpu: 0.3% 3: mem: 30.4 MiB (0.7%) command: containerd pid: 466 cpu: 0.0% 4: mem: 28.1 MiB (0.7%) command: lxpanel pid: 908 cpu: 0.9% 5: mem: 20.2 MiB (0.5%) command: pcmanfm pid: 909 cpu: 0.0% Info: Processes: 156 Uptime: 14m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1200M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 347.1 MiB (8.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 177x41 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: usb0 state: down mac:  
           IF-ID-4: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 59.48 GiB used: 9.63 GiB (16.2%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.24 GiB (98.33%) used: 9.58 GiB (16.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.1.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 
           Device-2: 1-1.1.4:5 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.4% command: [kworker/u8:0-events_unbound] pid: 2849 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.9% command: lxpanel pid: 908 mem: 28.1 MiB (0.7%) 
           3: cpu: 0.6% command: init pid: 1 mem: 8.15 MiB (0.2%) 
           4: cpu: 0.3% command: xorg pid: 537 mem: 45.4 MiB (1.1%) 
           5: cpu: 0.3% command: packagekitd pid: 3067 mem: 12.4 MiB (0.3%) 
           Memory top: 5 
           1: mem: 59.8 MiB (1.5%) command: dockerd pid: 475 cpu: 0.2% 
           2: mem: 45.4 MiB (1.1%) command: xorg pid: 537 cpu: 0.3% 
           3: mem: 30.4 MiB (0.7%) command: containerd pid: 466 cpu: 0.0% 
           4: mem: 28.1 MiB (0.7%) command: lxpanel pid: 908 cpu: 0.9% 
           5: mem: 20.2 MiB (0.5%) command: pcmanfm pid: 909 cpu: 0.0% 
Info:      Processes: 156 Uptime: 14m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8927 - Brand: SanDisk SD Ultra A1 (SC64G)