Benchmark #9021 - pibenchmarks.com

Brand: Samsung T5 Portable
SSD (Portable)
#17 / 1,675
686
#385 / 1,675
#373 / 984
#43 / 144
7,902
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-17 06:49:56
#9,021
8,624
+722 (+8.37%)
Anonymous
Samsung T5 500 GB on Pi4 4 GB

Storage Details
Samsung T5 Portable
SSD (Portable)
500G
SSD
Samsung
PortableSSDT5
mSATA
SATA
3.00
5,000
1d6b:61f5
0x1d6b (Linux Foundation)
0x61f5
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
182 MB/s
296.07 MB/s
282.71 MB/s
8,630 IOPS
22,604 IOPS
34,521 KB/s
90,419 KB/s
31,714 KB/s
27,864 KB/s
25,143 KB/s
33,917 KB/s

inxi Results
System: Host: dev Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=153ac4d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 479.6 MiB (12.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 120x55 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2001:980:b2bc:1:dea6:32ff:fe0f:7ebc/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::dea6:32ff:fe0f:7ebc/64 scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 495.48 GiB used: 34.03 GiB (6.9%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: Portable SSD T5 size: 465.76 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.50 GiB size: 457.20 GiB (98.22%) used: 24.30 GiB (5.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.9 MiB (15.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 3FFE-CDCA ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.94 GiB (98.22%) used: 9.64 GiB (33.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Samsung Portable SSD T5 type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 04e8:61f5 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https://deb.nodesource.com/node_10.x buster main 2: deb-src https://deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.9% command: lxpanel pid: 923 mem: 41.5 MiB (1.0%) 2: cpu: 0.3% command: xorg pid: 491 mem: 43.9 MiB (1.1%) 3: cpu: 0.2% command: sudo pid: 16146 mem: 3.11 MiB (0.0%) 4: cpu: 0.2% command: packagekitd pid: 16369 mem: 12.6 MiB (0.3%) 5: cpu: 0.1% command: -bash pid: 15830 mem: 3.71 MiB (0.0%) Memory top: 5 1: mem: 43.9 MiB (1.1%) command: xorg pid: 491 cpu: 0.3% 2: mem: 41.5 MiB (1.0%) command: lxpanel pid: 923 cpu: 0.9% 3: mem: 21.8 MiB (0.5%) command: pcmanfm pid: 925 cpu: 0.0% 4: mem: 16.3 MiB (0.4%) command: apache2 pid: 500 cpu: 0.0% 5: mem: 15.8 MiB (0.4%) command: openbox pid: 913 cpu: 0.0% Info: Processes: 163 Uptime: 1d 16h 03m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 clang: 9.0.1-6+rpi1~bpo10+1 Shell: Storage.sh (sudo) inxi: 3.0.37

inxi Results

System:    Host: dev Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=153ac4d6-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory:    RAM: total: 3.89 GiB used: 479.6 MiB (12.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 
           model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 120x55 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2001:980:b2bc:1:dea6:32ff:fe0f:7ebc/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::dea6:32ff:fe0f:7ebc/64 scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 495.48 GiB used: 34.03 GiB (6.9%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: Portable SSD T5 size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.50 GiB size: 457.20 GiB (98.22%) used: 24.30 GiB (5.3%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.9 MiB (15.8%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 3FFE-CDCA 
           ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.94 GiB (98.22%) used: 9.64 GiB (33.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Samsung Portable SSD T5 type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 04e8:61f5 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https://deb.nodesource.com/node_10.x buster main
           2: deb-src https://deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.9% command: lxpanel pid: 923 mem: 41.5 MiB (1.0%) 
           2: cpu: 0.3% command: xorg pid: 491 mem: 43.9 MiB (1.1%) 
           3: cpu: 0.2% command: sudo pid: 16146 mem: 3.11 MiB (0.0%) 
           4: cpu: 0.2% command: packagekitd pid: 16369 mem: 12.6 MiB (0.3%) 
           5: cpu: 0.1% command: -bash pid: 15830 mem: 3.71 MiB (0.0%) 
           Memory top: 5 
           1: mem: 43.9 MiB (1.1%) command: xorg pid: 491 cpu: 0.3% 
           2: mem: 41.5 MiB (1.0%) command: lxpanel pid: 923 cpu: 0.9% 
           3: mem: 21.8 MiB (0.5%) command: pcmanfm pid: 925 cpu: 0.0% 
           4: mem: 16.3 MiB (0.4%) command: apache2 pid: 500 cpu: 0.0% 
           5: mem: 15.8 MiB (0.4%) command: openbox pid: 913 cpu: 0.0% 
Info:      Processes: 163 Uptime: 1d 16h 03m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: 
           gcc: 8.3.0 alt: 8 clang: 9.0.1-6+rpi1~bpo10+1 Shell: Storage.sh (sudo) inxi: 3.0.37

Benchmark #9021 - Brand: Samsung T5 Portable