Benchmark #9075 - pibenchmarks.com

Brand: SanDisk U100
SSD (2.5" SATA)
#379 / 1,700
33
#1,100 / 1,700
#961 / 989
#350 / 370
2,069
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.fr Amazon.it

Overview
2020-02-17 11:04:25
#9,075
1,895
-174 (-9.18%)
Anonymous
ssdusb2

Storage Details
SanDisk U100
SSD (2.5" SATA)
128G
SSD
SanDisk
SSDU100128GB
1.8 inch
SATA
2.10
480
2109:5136
0x2109
0x5136 (ASM1053 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
27.1 MB/s
29.54 MB/s
29.36 MB/s
2,126 IOPS
1,801 IOPS
8,504 KB/s
7,204 KB/s
9,987 KB/s
9,272 KB/s
6,778 KB/s
8,707 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4eceac29-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 205.5 MiB (5.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? resolution: Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 126.64 GiB used: 1.39 GiB (1.1%) ID-1: /dev/mmcblk0 model: SS08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: SSD U100 128GB size: 119.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.98 GiB size: 116.62 GiB (98.01%) used: 1.34 GiB (1.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 5b41249b-a622-4dcf-a155-f69eadf73fef ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: F570-BEF7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5136 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.5% command: init pid: 1 mem: 7.94 MiB (0.2%) 2: cpu: 1.1% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: systemd-journald pid: 108 mem: 6.91 MiB (0.1%) 4: cpu: 0.5% command: systemd-udevd pid: 144 mem: 3.80 MiB (0.0%) 5: cpu: 0.4% command: dbus-daemon pid: 332 mem: 2.89 MiB (0.0%) Memory top: 5 1: mem: 7.94 MiB (0.2%) command: init pid: 1 cpu: 4.5% 2: mem: 6.91 MiB (0.1%) command: systemd-journald pid: 108 cpu: 0.5% 3: mem: 6.67 MiB (0.1%) command: systemd pid: 564 cpu: 0.1% 4: mem: 6.11 MiB (0.1%) command: sshd: pid: 558 cpu: 0.1% 5: mem: 5.48 MiB (0.1%) command: systemd-logind pid: 322 cpu: 0.2% Info: Processes: 140 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4eceac29-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 205.5 MiB (5.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? 
           resolution:  
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 126.64 GiB used: 1.39 GiB (1.1%) 
           ID-1: /dev/mmcblk0 model: SS08G size: 7.40 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD U100 128GB size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.98 GiB size: 116.62 GiB (98.01%) used: 1.34 GiB (1.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 5b41249b-a622-4dcf-a155-f69eadf73fef 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: F570-BEF7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5136 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.5% command: init pid: 1 mem: 7.94 MiB (0.2%) 
           2: cpu: 1.1% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.5% command: systemd-journald pid: 108 mem: 6.91 MiB (0.1%) 
           4: cpu: 0.5% command: systemd-udevd pid: 144 mem: 3.80 MiB (0.0%) 
           5: cpu: 0.4% command: dbus-daemon pid: 332 mem: 2.89 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.94 MiB (0.2%) command: init pid: 1 cpu: 4.5% 
           2: mem: 6.91 MiB (0.1%) command: systemd-journald pid: 108 cpu: 0.5% 
           3: mem: 6.67 MiB (0.1%) command: systemd pid: 564 cpu: 0.1% 
           4: mem: 6.11 MiB (0.1%) command: sshd: pid: 558 cpu: 0.1% 
           5: mem: 5.48 MiB (0.1%) command: systemd-logind pid: 322 cpu: 0.2% 
Info:      Processes: 140 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #9075 - Brand: SanDisk U100