Benchmark #9124 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SL32G)
A1 C10 V10 U1
#62 / 1,675
294
#1,338 / 1,675
#210 / 391
1,152
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-17 13:56:51
#9,124
1,098
-54 (-4.92%)
Anonymous
Pi4

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SL32G)
A1 C10 V10 U1
7.3G
SD
SanDisk
SL32G
SDHC
5.00
0x03
SD
8.0
05/2019
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Debian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
19 MB/s
41.27 MB/s
33.13 MB/s
768 IOPS
3,053 IOPS
3,072 KB/s
12,215 KB/s
9,426 KB/s
3,439 KB/s
8,661 KB/s
2,304 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.50-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet Console: tty 0 dm: N/A Distro: Armbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 Memory: RAM: total: 1000.5 MiB used: 200.6 MiB (20.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: WAN IP: Drives: Local Storage: total: 1.85 TiB used: 1.21 TiB (65.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Western Digital model: WD20EZRZ-00Z5HB0 size: 1.82 TiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: k 0B scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.33 GiB size: 7.15 GiB (97.62%) used: 1.48 GiB (20.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: 2666ed46-1bb6-4ad7-ab5d-2ccde455c5e5 ID-2: /boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 27.1 MiB (43.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: CE83-8CE1 ID-3: /srv/dev-disk-by-label-BACKUP raw size: 1.82 TiB size: 1.79 TiB (98.38%) used: 1.21 TiB (67.6%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: BACKUP uuid: ed692ea6-5890-4c07-92c9-e2fd1f2932f9 Unmounted: ID-1: /dev/mmcblk0p3 size: 22.03 GiB fs: requires file label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Seagate RSS LLC type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:50a0 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //httpredir.debian.org/debian stretch main contrib non-free 2: deb http: //httpredir.debian.org/debian stretch-updates main contrib non-free 3: deb http: //httpredir.debian.org/debian stretch-backports main contrib non-free 4: deb http: //security.debian.org/ stretch/updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/armbian.list 1: deb http: //apt.armbian.com stretch utils Active apt repos in: /etc/apt/sources.list.d/omv-extras-org.list 1: deb https: //dl.bintray.com/openmediavault-plugin-developers/arrakis stretch main Active apt repos in: /etc/apt/sources.list.d/openmediavault-kernel-backports.list 1: deb http: //httpredir.debian.org/debian stretch-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/openmediavault-local.list 1: deb [trusted=yes] file: /var/cache/openmediavault/archives / Active apt repos in: /etc/apt/sources.list.d/openmediavault.list 1: deb http: //packages.openmediavault.org/public/ arrakis main 2: deb https: //openmediavault.github.io/packages/ arrakis main Active apt repos in: /etc/apt/sources.list.d/raspberry.list 1: deb https: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 7.0% command: transmission-daemon pid: 1097 mem: 19.5 MiB (2.1%) 2: cpu: 2.2% command: php-fpm: pid: 4058 mem: 9.55 MiB (1.0%) 3: cpu: 0.6% command: init pid: 1 mem: 5.01 MiB (0.5%) 4: cpu: 0.6% command: haveged pid: 358 mem: 4.02 MiB (0.4%) 5: cpu: 0.1% command: [usb-storage] pid: 105 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 19.9 MiB (2.1%) command: php-fpm: pid: 1098 cpu: 0.0% 2: mem: 19.5 MiB (2.1%) command: transmission-daemon pid: 1097 cpu: 7.0% 3: mem: 12.8 MiB (1.3%) command: omv-engined pid: 1121 cpu: 0.0% 4: mem: 12.5 MiB (1.3%) command: wsdd.py started by: python3 pid: 1137 cpu: 0.0% 5: mem: 12.3 MiB (1.3%) command: networkmanager pid: 787 cpu: 0.0% Info: Processes: 136 Uptime: 8m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.50-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet 
           Console: tty 0 dm: N/A Distro: Armbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 
           Memory:    RAM: total: 1000.5 MiB used: 200.6 MiB (20.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 1.85 TiB used: 1.21 TiB (65.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD20EZRZ-00Z5HB0 size: 1.82 TiB 
           block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: k 0B scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.33 GiB size: 7.15 GiB (97.62%) used: 1.48 GiB (20.6%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: N/A 
           uuid: 2666ed46-1bb6-4ad7-ab5d-2ccde455c5e5 
           ID-2: /boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 27.1 MiB (43.8%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: CE83-8CE1 
           ID-3: /srv/dev-disk-by-label-BACKUP raw size: 1.82 TiB size: 1.79 TiB (98.38%) 
           used: 1.21 TiB (67.6%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: BACKUP 
           uuid: ed692ea6-5890-4c07-92c9-e2fd1f2932f9 
Unmounted: ID-1: /dev/mmcblk0p3 size: 22.03 GiB fs: requires file label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Seagate RSS LLC type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:50a0 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //httpredir.debian.org/debian stretch main contrib non-free
           2: deb http: //httpredir.debian.org/debian stretch-updates main contrib non-free
           3: deb http: //httpredir.debian.org/debian stretch-backports main contrib non-free
           4: deb http: //security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/armbian.list 
           1: deb http: //apt.armbian.com stretch utils
           Active apt repos in: /etc/apt/sources.list.d/omv-extras-org.list 
           1: deb https: //dl.bintray.com/openmediavault-plugin-developers/arrakis stretch main
           Active apt repos in: /etc/apt/sources.list.d/openmediavault-kernel-backports.list 
           1: deb http: //httpredir.debian.org/debian stretch-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/openmediavault-local.list 
           1: deb [trusted=yes] file: /var/cache/openmediavault/archives /
           Active apt repos in: /etc/apt/sources.list.d/openmediavault.list 
           1: deb http: //packages.openmediavault.org/public/ arrakis main
           2: deb https: //openmediavault.github.io/packages/ arrakis main
           Active apt repos in: /etc/apt/sources.list.d/raspberry.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 7.0% command: transmission-daemon pid: 1097 mem: 19.5 MiB (2.1%) 
           2: cpu: 2.2% command: php-fpm: pid: 4058 mem: 9.55 MiB (1.0%) 
           3: cpu: 0.6% command: init pid: 1 mem: 5.01 MiB (0.5%) 
           4: cpu: 0.6% command: haveged pid: 358 mem: 4.02 MiB (0.4%) 
           5: cpu: 0.1% command: [usb-storage] pid: 105 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 19.9 MiB (2.1%) command: php-fpm: pid: 1098 cpu: 0.0% 
           2: mem: 19.5 MiB (2.1%) command: transmission-daemon pid: 1097 cpu: 7.0% 
           3: mem: 12.8 MiB (1.3%) command: omv-engined pid: 1121 cpu: 0.0% 
           4: mem: 12.5 MiB (1.3%) command: wsdd.py started by: python3 pid: 1137 cpu: 0.0% 
           5: mem: 12.3 MiB (1.3%) command: networkmanager pid: 787 cpu: 0.0% 
Info:      Processes: 136 Uptime: 8m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 
           Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #9124 - Brand: SanDisk SD Ultra A1 (SL32G)