Benchmark #91403 - pibenchmarks.com

Brand: Samsung PM9B1 M.2 NVMe Series
SSD (M.2 NVMe)
#184 / 1,585
72
#36 / 1,585
#36 / 909
#33 / 216
42,756
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2024-07-22 07:28:25
#91,403
36,724
-6,032 (-16.43%)
Anonymous
pm9b1

Storage Details
Samsung PM9B1 M.2 NVMe Series
SSD (M.2 NVMe)
476.4G
SSD
Samsung
MZVL4512HBLU-00BLL
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
278 MB/s
373.6 MB/s
373.49 MB/s
85,690 IOPS
84,979 IOPS
342,761 KB/s
339,917 KB/s
164,420 KB/s
147,291 KB/s
72,744 KB/s
158,831 KB/s

inxi Results
System: Host: raspberrypi Kernel: 6.6.31+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=1077abb7-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=MY Console: pty pts/1 DM: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.86 GiB used: 605.3 MiB (7.5%) igpu: 4 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: wayfire v: 0.7.5 driver: N/A tty: 43x50 API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu name: V3D 7.1.7 driver: mesa v3dv v: 23.2.1-1~bpo12+rpt3 device-ID: 14e4:55701c33 surfaces: N/A device: 1 type: cpu name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe v: 23.2.1-1~bpo12+rpt3 (LLVM 15.0.6) device-ID: 10005:0000 surfaces: N/A API: OpenGL Message: GL data unavailable in console, glxinfo missing. Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.6.31+rpt-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: N/A port: N/A bus-ID: 0001:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2001:e68:5405:2b59:778d:ecb3:5fba:aa2d/64 type: dynamic noprefixroute scope: global IP v6: fe80::2aa2:7fcc:1cae:7eb8/64 type: noprefixroute scope: link IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 175.136.X.X Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 534.89 GiB used: 4.78 GiB (0.9%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD64G size: 57.95 GiB block-size: physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVL4512HBLU-00BLL size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD fw-rev: CL2QHXC7 temp: 46.9 C scheme: MBR SMART: yes health: PASSED on: 11 hrs cycles: 12 read-units: 5,371 [2.74 GB] written-units: 22,766 [11.6 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 476.44 GiB size: 468.99 GiB (98.44%) used: 4.7 GiB (1.0%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs uuid: 12974fe2-889e-4060-b497-1d6ac3fbbb4b ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 74.6 MiB (14.6%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: bootfs uuid: 9BE2-1346 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 200 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 56.1 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1594 libs: 886 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.com/debian/ bookworm main Processes: CPU top: 5 of 197 1: cpu: 0.1% command: [kworker/0:2-events] pid: 6236 mem: 0.00 MiB (0.0%) 2: cpu: 0.1% command: [kworker/0:1-events] pid: 6245 mem: 0.00 MiB (0.0%) 3: cpu: 0.0% command: init pid: 1 mem: 12.9 MiB (0.1%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [pool_workqueue_release] pid: 3 mem: 0.00 MiB (0.0%) Memory top: 5 of 197 1: mem: 100.5 MiB (1.2%) command: wayfire pid: 960 cpu: 0.0% 2: mem: 60.5 MiB (0.7%) command: wf-panel-pi pid: 1143 cpu: 0.0% 3: mem: 56.0 MiB (0.6%) command: xdg-desktop-portal-wlr pid: 1236 cpu: 0.0% 4: mem: 55.1 MiB (0.6%) command: pcmanfm pid: 1137 cpu: 0.0% 5: mem: 47.8 MiB (0.5%) command: wayvnc pid: 1301 cpu: 0.0% Info: Processes: 197 Uptime: 2d 4h 55m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: Storage.sh (sudo) default: Bash v: 5.2.15 running-in: pty pts/1 inxi: 3.3.31

inxi Results

System:
  Host: raspberrypi
    Kernel: 6.6.31+rpt-rpi-2712
    arch: aarch64 bits: 64 compiler: gcc
    v: 12.2.0
    clocksource: arch_sys_counter
    parameters: reboot=w
    coherent_pool=1M 8250.nr_uarts=1
    pci=pcie_bus_safe
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3fc00000
    vc_mem.mem_size=0x40000000
    console=ttyAMA10,115200 console=tty1
    root=PARTUUID=1077abb7-02
    rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash
    plymouth.ignore-serial-consoles
    cfg80211.ieee80211_regdom=MY
  Console: pty pts/1 DM: LightDM
    v: 1.26.0 Distro: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 5 Model
    B Rev 1.0 details: N/A rev: d04170
    Battery:
  Message: No system battery data found.
    Is one present?
Memory:
  System RAM: total: 8 GiB
    available: 7.86 GiB
    used: 605.3 MiB (7.5%) igpu: 4 MiB
  RAM Report: smbios: No SMBIOS data
    for dmidecode to process
PCI Slots:
  Message: No ARM data found for this
    feature.
CPU:
  Info: model: N/A variant: cortex-a76
    bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 4 stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A
    cache: L1: 512 KiB
    desc: d-4x64 KiB! i-4x64 KiB
    L2: 2 MiB desc: 4x512 KiB L3: 2 MiB
    desc: 1x2 MiB
  Speed (MHz): avg: 2400
    min/max: 1500/2400 scaling:
    driver: cpufreq-dt governor: ondemand
    cores: 1: 2400 2: 2400 3: 2400
    4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp
    asimdrdm atomics cpuid crc32 dcpop
    evtstrm fp fphp lrcpc pmull sha1
    sha2
  Vulnerabilities:
  Type: gather_data_sampling
    status: Not affected
  Type: itlb_multihit
    status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data
    status: Not affected
  Type: reg_file_data_sampling
    status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow
    status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass
    disabled via prctl
  Type: spectre_v1 mitigation: __user
    pointer sanitization
  Type: spectre_v2
    mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsx_async_abort
    status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0
    driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1
    driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: wayland server: X.org
    v: 1.21.X.X with: Xwayland v: 22.1.9
    compositor: wayfire v: 0.7.5
    driver: N/A tty: 43x50
  API: Vulkan v: 1.3.239 layers: 2
    device: 0 type: integrated-gpu
    name: V3D 7.1.7 driver: mesa v3dv
    v: 23.2.1-1~bpo12+rpt3
    device-ID: 14e4:55701c33
    surfaces: N/A device: 1 type: cpu
    name: llvmpipe (LLVM 15.0.6 128
    bits) driver: mesa llvmpipe
    v: 23.2.1-1~bpo12+rpt3 (LLVM 15.0.6)
    device-ID: 10005:0000 surfaces: N/A
  API: OpenGL Message: GL data
    unavailable in console, glxinfo
    missing.
Audio:
  Device-1: bcm2712-hdmi0
    driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1
    driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c706400
    class-ID: hdmi
  API: ALSA v: k6.6.31+rpt-rpi-2712
    status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.65
    status: n/a (root, process) with:
    1: pipewire-pulse status: active
    2: wireplumber status: active
    tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1
    status: off (using pipewire-pulse)
    tools: pacat,pactl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0
    South Bridge driver: rp1 v: N/A
    port: N/A bus-ID: 0001:01:00.0
    chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: up
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24
    type: dynamic noprefixroute
    scope: global
    broadcast: 192.168.X.X
  IP v6: 2001:e68:5405:2b59:778d:ecb3:5fba:aa2d/64 type: dynamic noprefixroute
    scope: global
  IP v6: fe80::2aa2:7fcc:1cae:7eb8/64
    type: noprefixroute scope: link
  IF-ID-1: eth0 state: down
    mac: XX:XX:XX:XX:XX:XX
  WAN IP: 175.136.X.X
Bluetooth:
  Device-1: bcm7271-uart
    driver: bcm7271_uart bus-ID: N/A
    chip-ID: brcm:107d50c000
    class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0
    state: up address: XX:XX:XX:XX:XX:XX
    bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1
    link-policy: rswitch sniff
    link-mode: peripheral accept
    service-classes: rendering,
    capturing, audio, telephony
  Device-2: bcm7271-uart driver: N/A
    bus-ID: N/A chip-ID: brcm:serial0
    class-ID: serial
Logical:
  Message: No logical block device data
    found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 534.89 GiB
    used: 4.78 GiB (0.9%)
  ID-1: /dev/mmcblk0 maj-min: 179:0
    vendor: SanDisk model: SD64G
    size: 57.95 GiB block-size:
    physical: 512 B logical: 512 B
    type: Removable tech: SSD
    scheme: MBR
  SMART Message: Unknown smartctl
    error. Unable to generate data.
  ID-2: /dev/nvme0n1 maj-min: 259:0
    vendor: Samsung
    model: MZVL4512HBLU-00BLL
    size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B
    speed: 63.2 Gb/s lanes: 4 tech: SSD
        fw-rev: CL2QHXC7 temp: 46.9 C
    scheme: MBR
  SMART: yes health: PASSED on: 11 hrs
    cycles: 12 read-units: 5,371 [2.74 GB]
    written-units: 22,766 [11.6 GB]
  Message: No optical or floppy data
    found.
Partition:
  ID-1: / raw-size: 476.44 GiB
    size: 468.99 GiB (98.44%)
    used: 4.7 GiB (1.0%) fs: ext4
    block-size: 4096 B
    dev: /dev/nvme0n1p2 maj-min: 259:2
    label: rootfs
    uuid: 12974fe2-889e-4060-b497-1d6ac3fbbb4b
  ID-2: /boot/firmware
    raw-size: 512 MiB
    size: 510 MiB (99.61%)
    used: 74.6 MiB (14.6%) fs: vfat
    block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: bootfs
    uuid: 9BE2-1346
Swap:
  Kernel: swappiness: 60 (default)
    cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 200 MiB
    used: 0 KiB (0.0%) priority: -2
    file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with
    single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub
    ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with
    single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 4-0:1 info: super-speed hub
    ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Src: /sys System Temperatures:
    cpu: 56.1 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1594 libs: 886
    tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.com/debian/ bookworm main
Processes:
  CPU top: 5 of 197
  1: cpu: 0.1%
    command: [kworker/0:2-events] pid: 6236
    mem: 0.00 MiB (0.0%)
  2: cpu: 0.1%
    command: [kworker/0:1-events] pid: 6245
    mem: 0.00 MiB (0.0%)
  3: cpu: 0.0% command: init pid: 1
    mem: 12.9 MiB (0.1%)
  4: cpu: 0.0% command: [kthreadd]
    pid: 2 mem: 0.00 MiB (0.0%)
  5: cpu: 0.0%
    command: [pool_workqueue_release]
    pid: 3 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 197
  1: mem: 100.5 MiB (1.2%)
    command: wayfire pid: 960 cpu: 0.0%
  2: mem: 60.5 MiB (0.7%)
    command: wf-panel-pi pid: 1143
    cpu: 0.0%
  3: mem: 56.0 MiB (0.6%)
    command: xdg-desktop-portal-wlr
    pid: 1236 cpu: 0.0%
  4: mem: 55.1 MiB (0.6%)
    command: pcmanfm pid: 1137 cpu: 0.0%
  5: mem: 47.8 MiB (0.5%)
    command: wayvnc pid: 1301 cpu: 0.0%
Info:
  Processes: 197 Uptime: 2d 4h 55m
  Init: systemd v: 252
  target: graphical (5)
  default: graphical tool: systemctl
  Compilers: gcc: 12.2.0 alt: 12
  Shell: Storage.sh (sudo) default: Bash
  v: 5.2.15 running-in: pty pts/1
  inxi: 3.3.31

Benchmark #91403 - Brand: Samsung PM9B1 M.2 NVMe Series