Benchmark #9237 - pibenchmarks.com

Brand: Lexar SD 300X
C10 U1
#203 / 1,701
89
#1,546 / 1,701
#338 / 405
635
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-18 00:48:03
#9,237
465
-170 (-36.56%)
Anonymous

Secure Digital (SD) Card Details
Lexar SD 300X
C10 U1
29.8G
SD
Lexar
00000
SDHC
3.00
0x28
BE
0.2
01/2016
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
7.3 MB/s
20.13 MB/s
10.31 MB/s
54 IOPS
1,769 IOPS
216 KB/s
7,079 KB/s
5,734 KB/s
606 KB/s
5,579 KB/s
315 KB/s

inxi Results
System: Host: pi4 Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 rootwait Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 244.6 MiB (24.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 157x58 Message: Advanced graphics data unavailable for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: noprefixroute dynamic scope: global IP v6: scope: link IF-ID-1: wlan0 state: up mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 29.83 GiB used: 15.42 GiB (51.7%) ID-1: /dev/mmcblk0 model: N/A size: 29.83 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.76 GiB size: 29.24 GiB (98.24%) used: 15.40 GiB (52.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: 443559ba-b80f-4fb6-99d9-ddbcd6138fbd ID-2: /boot raw size: 60.0 MiB size: 59.9 MiB (99.91%) used: 23.6 MiB (39.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 35ED-46FE Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/packages.hedgerows.org.uk.list 1: deb http: //packages.hedgerows.org.uk/raspbian stable/ 2: deb-src http: //packages.hedgerows.org.uk/raspbian stable/ Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 43.0% command: python3 pid: 5771 mem: 11.4 MiB (1.2%) 2: cpu: 2.2% command: feh pid: 2310 mem: 4.52 MiB (0.4%) 3: cpu: 1.6% command: -bash pid: 5353 mem: 3.95 MiB (0.4%) 4: cpu: 0.7% command: avahi-daemon: pid: 438 mem: 2.82 MiB (0.3%) 5: cpu: 0.6% command: xorg pid: 1075 mem: 8.26 MiB (0.8%) Memory top: 5 1: mem: 44.2 MiB (4.7%) command: lxpanel pid: 1690 cpu: 0.6% 2: mem: 11.4 MiB (1.2%) command: python3 pid: 5771 cpu: 43.0% 3: mem: 8.69 MiB (0.9%) command: systemd-journald pid: 114 cpu: 0.0% 4: mem: 8.26 MiB (0.8%) command: xorg pid: 1075 cpu: 0.6% 5: mem: 7.44 MiB (0.8%) command: temperature-mqtt-client.py started by: python3 pid: 686 cpu: 0.0% Info: Processes: 164 Uptime: 7d 23h 00m Init: systemd v: 232 runlevel: 5 target: graphical.target Compilers: gcc: 6.3.0 alt: 4.9/6 clang: 3.8.1-24+rpi1 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: pi4 Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=800 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 rootwait 
           Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.18.3 
           Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 244.6 MiB (24.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 157x58 
           Message: Advanced graphics data unavailable for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: noprefixroute dynamic scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 29.83 GiB used: 15.42 GiB (51.7%) 
           ID-1: /dev/mmcblk0 model: N/A size: 29.83 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.76 GiB size: 29.24 GiB (98.24%) used: 15.40 GiB (52.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: N/A 
           uuid: 443559ba-b80f-4fb6-99d9-ddbcd6138fbd 
           ID-2: /boot raw size: 60.0 MiB size: 59.9 MiB (99.91%) used: 23.6 MiB (39.3%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 35ED-46FE 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/packages.hedgerows.org.uk.list 
           1: deb http: //packages.hedgerows.org.uk/raspbian stable/
           2: deb-src http: //packages.hedgerows.org.uk/raspbian stable/
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 43.0% command: python3 pid: 5771 mem: 11.4 MiB (1.2%) 
           2: cpu: 2.2% command: feh pid: 2310 mem: 4.52 MiB (0.4%) 
           3: cpu: 1.6% command: -bash pid: 5353 mem: 3.95 MiB (0.4%) 
           4: cpu: 0.7% command: avahi-daemon: pid: 438 mem: 2.82 MiB (0.3%) 
           5: cpu: 0.6% command: xorg pid: 1075 mem: 8.26 MiB (0.8%) 
           Memory top: 5 
           1: mem: 44.2 MiB (4.7%) command: lxpanel pid: 1690 cpu: 0.6% 
           2: mem: 11.4 MiB (1.2%) command: python3 pid: 5771 cpu: 43.0% 
           3: mem: 8.69 MiB (0.9%) command: systemd-journald pid: 114 cpu: 0.0% 
           4: mem: 8.26 MiB (0.8%) command: xorg pid: 1075 cpu: 0.6% 
           5: mem: 7.44 MiB (0.8%) command: temperature-mqtt-client.py started by: python3 
           pid: 686 cpu: 0.0% 
Info:      Processes: 164 Uptime: 7d 23h 00m Init: systemd v: 232 runlevel: 5 
           target: graphical.target Compilers: gcc: 6.3.0 alt: 4.9/6 clang: 3.8.1-24+rpi1 
           Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #9237 - Brand: Lexar SD 300X