Benchmark #9275 - pibenchmarks.com

Brand: Toshiba SD (SA16G)
A1 C10 U1
#128 / 1,701
149
#1,491 / 1,701
#302 / 405
844
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-18 06:47:12
#9,275
1,196
+352 (+29.43%)
azanetti

Secure Digital (SD) Card Details
Toshiba SD (SA16G)
A1 C10 U1
14.2G
SD
Toshiba
SA16G
SDHC
5.00
0x02
TM
4.9
07/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3A+ 1.0
Raspberry Pi 3 Model A Plus Rev 1.0
Raspberry Pi Foundation
1,400
400
450
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
13.4 MB/s
22.03 MB/s
21.95 MB/s
904 IOPS
2,538 IOPS
3,618 KB/s
10,152 KB/s
8,977 KB/s
3,986 KB/s
7,562 KB/s
4,393 KB/s

inxi Results
System: Host: Pi3APlusCam1 Kernel: 4.19.93-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model A Plus Rev 1.0 details: BCM2835 rev: 9020e0 Memory: RAM: total: 495.4 MiB used: 248.2 MiB (50.1%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 237x59 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7+ Network: Message: No ARM data found for this feature. IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global IP v6: virtual: stable-privacy scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 14.44 GiB used: 2.50 GiB (17.3%) ID-1: /dev/mmcblk0 model: SA16G size: 14.44 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.18 GiB size: 13.93 GiB (98.23%) used: 2.45 GiB (17.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.6% command: [kworker/u8:1-brcmf_wq/mmc1:0001:1] pid: 5072 mem: 0.00 MiB (0.0%) 2: cpu: 0.8% command: boinc pid: 453 mem: 12.1 MiB (3.2%) 3: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 5032 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: sshd: pid: 5007 mem: 5.90 MiB (1.6%) 5: cpu: 0.1% command: -bash pid: 5020 mem: 2.65 MiB (0.7%) Memory top: 5 1: mem: 16.8 MiB (4.5%) command: rpc.mountd pid: 461 cpu: 0.0% 2: mem: 12.1 MiB (3.2%) command: boinc pid: 453 cpu: 0.8% 3: mem: 7.73 MiB (2.1%) command: init pid: 1 cpu: 0.0% 4: mem: 7.05 MiB (1.9%) command: systemd pid: 500 cpu: 0.0% 5: mem: 7.04 MiB (1.9%) command: systemd-journald pid: 122 cpu: 0.0% Info: Processes: 152 Uptime: 2h 58m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: Pi3APlusCam1 Kernel: 4.19.93-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model A Plus Rev 1.0 details: BCM2835 
           rev: 9020e0 Memory:    RAM: total: 495.4 MiB used: 248.2 MiB (50.1%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 237x59 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global 
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 14.44 GiB used: 2.50 GiB (17.3%) 
           ID-1: /dev/mmcblk0 model: SA16G size: 14.44 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.18 GiB size: 13.93 GiB (98.23%) used: 2.45 GiB (17.6%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.6% command: [kworker/u8:1-brcmf_wq/mmc1:0001:1] pid: 5072 
           mem: 0.00 MiB (0.0%) 
           2: cpu: 0.8% command: boinc pid: 453 mem: 12.1 MiB (3.2%) 
           3: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 5032 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: sshd: pid: 5007 mem: 5.90 MiB (1.6%) 
           5: cpu: 0.1% command: -bash pid: 5020 mem: 2.65 MiB (0.7%) 
           Memory top: 5 
           1: mem: 16.8 MiB (4.5%) command: rpc.mountd pid: 461 cpu: 0.0% 
           2: mem: 12.1 MiB (3.2%) command: boinc pid: 453 cpu: 0.8% 
           3: mem: 7.73 MiB (2.1%) command: init pid: 1 cpu: 0.0% 
           4: mem: 7.05 MiB (1.9%) command: systemd pid: 500 cpu: 0.0% 
           5: mem: 7.04 MiB (1.9%) command: systemd-journald pid: 122 cpu: 0.0% 
Info:      Processes: 152 Uptime: 2h 58m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #9275 - Brand: Toshiba SD (SA16G)