Benchmark #9344 - pibenchmarks.com

Brand: Samsung eMMC (8GND3)
MMC (Embedded)
#1,341 / 1,679
1
#1,196 / 1,679
#69 / 75
#70 / 92
1,478

Overview
2020-02-18 12:26:38
#9,344
1,478
0 (0.00%)
eMMC 8GB
eMMC 8GB via microSD adapter

Storage Details
Samsung eMMC (8GND3)
MMC (Embedded)
7G
MMC
Samsung
8GND3
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Zero W 1.1
Raspberry Pi Zero W Rev 1.1
Raspberry Pi Foundation
1,000
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv6l

Benchmark Results
22 MB/s
21.71 MB/s
21.74 MB/s
1,279 IOPS
2,465 IOPS
5,117 KB/s
9,860 KB/s
7,094 KB/s
5,145 KB/s
6,960 KB/s
6,263 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Host: raspberrypi Kernel: 4.19.97+ armv6l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi Zero W Rev 1.1 details: BCM2835 rev: 9000c1 Memory: RAM: total: 496.4 MiB used: 127.9 MiB (25.8%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Single Core model: ARMv6-compatible v6l bits: 32 type: UP arch: v6l family: 7 model-id: N/A stepping: 7 microcode: N/A bogomips: 997 Speed: 1000 MHz min/max: 700/1000 MHz Core speed (MHz): 1: 1000 Features: edsp fastmult half java thumb tls vfp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 94x27 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97+ Network: Message: No ARM data found for this feature. IF-ID-1: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 7.28 GiB used: 1.33 GiB (18.3%) ID-1: /dev/mmcblk0 model: 8GND3R size: 7.28 GiB block size: physical: 512 B logical: 512 B rev: 0x7 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.03 GiB size: 6.89 GiB (97.99%) used: 1.28 GiB (18.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.8% command: init pid: 1 mem: 7.91 MiB (1.8%) 2: cpu: 1.0% command: [kworker/u2:3-brcmf_wq/mmc1:0001:1] pid: 466 mem: 0.00 MiB (0.0%) 3: cpu: 0.6% command: [kworker/u2:0-brcmf_wq/mmc1:0001:1] pid: 5 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: [irq/86-mmc1] pid: 44 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: avahi-daemon: pid: 245 mem: 2.75 MiB (0.6%) Memory top: 5 1: mem: 7.91 MiB (1.8%) command: init pid: 1 cpu: 2.8% 2: mem: 7.10 MiB (1.6%) command: systemd pid: 423 cpu: 0.0% 3: mem: 6.17 MiB (1.4%) command: systemd-journald pid: 70 cpu: 0.2% 4: mem: 6.16 MiB (1.4%) command: sshd: pid: 411 cpu: 0.1% 5: mem: 5.61 MiB (1.2%) command: systemd-logind pid: 252 cpu: 0.2% Info: Processes: 78 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Host: raspberrypi Kernel: 4.19.97+ armv6l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi Zero W Rev 1.1 details: BCM2835 rev: 9000c1 
           Memory:    RAM: total: 496.4 MiB used: 127.9 MiB (25.8%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Single Core model: ARMv6-compatible v6l bits: 32 type: UP arch: v6l family: 7 
           model-id: N/A stepping: 7 microcode: N/A bogomips: 997 
           Speed: 1000 MHz min/max: 700/1000 MHz Core speed (MHz): 1: 1000 
           Features: edsp fastmult half java thumb tls vfp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 94x27 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 7.28 GiB used: 1.33 GiB (18.3%) 
           ID-1: /dev/mmcblk0 model: 8GND3R size: 7.28 GiB block size: physical: 512 B 
           logical: 512 B rev: 0x7 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.03 GiB size: 6.89 GiB (97.99%) used: 1.28 GiB (18.6%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.8% command: init pid: 1 mem: 7.91 MiB (1.8%) 
           2: cpu: 1.0% command: [kworker/u2:3-brcmf_wq/mmc1:0001:1] pid: 466 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.6% command: [kworker/u2:0-brcmf_wq/mmc1:0001:1] pid: 5 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.6% command: [irq/86-mmc1] pid: 44 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.6% command: avahi-daemon: pid: 245 mem: 2.75 MiB (0.6%) 
           Memory top: 5 
           1: mem: 7.91 MiB (1.8%) command: init pid: 1 cpu: 2.8% 
           2: mem: 7.10 MiB (1.6%) command: systemd pid: 423 cpu: 0.0% 
           3: mem: 6.17 MiB (1.4%) command: systemd-journald pid: 70 cpu: 0.2% 
           4: mem: 6.16 MiB (1.4%) command: sshd: pid: 411 cpu: 0.1% 
           5: mem: 5.61 MiB (1.2%) command: systemd-logind pid: 252 cpu: 0.2% 
Info:      Processes: 78 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #9344 - Brand: Samsung eMMC (8GND3)