Benchmark #9350 - pibenchmarks.com

Brand: SanDisk Cruzer Blade
USB Flash
#363 / 1,675
32
#1,495 / 1,675
#67 / 93
#63 / 89
715
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-18 13:00:34
#9,350
511
-204 (-39.92%)
Anonymous
SanDisk Cruzer Blade 16GB USB 2.0 on Pi 4

Storage Details
SanDisk Cruzer Blade
USB Flash
14.9G
USB Flash
SanDisk
CruzerBlade
2.10
480
0781:5567
0x0781 (SanDisk Corp.)
0x5567
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
4.9 MB/s
30.71 MB/s
29.6 MB/s
277 IOPS
1,045 IOPS
1,109 KB/s
4,181 KB/s
11,496 KB/s
1,990 KB/s
4,158 KB/s
994 KB/s

inxi Results
System: Host: TSPi4 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=6cba94aa-02 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 209.2 MiB (5.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 160x48 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 29.36 GiB used: 6.86 GiB (23.4%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Blade size: 14.91 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.91 GiB size: 14.61 GiB (98.01%) used: 6.80 GiB (46.6%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 1d27fbd4-84a4-4a93-ad20-0011e0490e98 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.5 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 0C61-73F5 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs uuid: 43f2d0bb-83be-464f-94d0-9a751f376c64 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: SanDisk Cruzer Blade type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5567 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/swift-arm_release.list 1: deb https: //packagecloud.io/swift-arm/release/raspbian/ buster main 2: deb-src https: //packagecloud.io/swift-arm/release/raspbian/ buster main Processes: CPU top: 5 1: cpu: 2.5% command: init pid: 1 mem: 7.97 MiB (0.2%) 2: cpu: 0.7% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 3: cpu: 0.6% command: [kworker/2:1-events] pid: 33 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: systemd-journald pid: 110 mem: 6.89 MiB (0.1%) 5: cpu: 0.3% command: systemd-udevd pid: 145 mem: 3.82 MiB (0.0%) Memory top: 5 1: mem: 12.7 MiB (0.3%) command: packagekitd pid: 920 cpu: 0.1% 2: mem: 7.97 MiB (0.2%) command: init pid: 1 cpu: 2.5% 3: mem: 7.15 MiB (0.1%) command: polkitd pid: 924 cpu: 0.0% 4: mem: 6.98 MiB (0.1%) command: systemd pid: 581 cpu: 0.0% 5: mem: 6.89 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.3% Info: Processes: 136 Uptime: 3m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: TSPi4 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 
           root=PARTUUID=6cba94aa-02 root=/dev/sda1 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 209.2 MiB (5.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 160x48 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.36 GiB used: 6.86 GiB (23.4%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Blade size: 14.91 GiB 
           block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.91 GiB size: 14.61 GiB (98.01%) used: 6.80 GiB (46.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 1d27fbd4-84a4-4a93-ad20-0011e0490e98 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.5 MiB (21.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 0C61-73F5 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs 
           uuid: 43f2d0bb-83be-464f-94d0-9a751f376c64 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: SanDisk Cruzer Blade type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5567 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/swift-arm_release.list 
           1: deb https: //packagecloud.io/swift-arm/release/raspbian/ buster main
           2: deb-src https: //packagecloud.io/swift-arm/release/raspbian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.5% command: init pid: 1 mem: 7.97 MiB (0.2%) 
           2: cpu: 0.7% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.6% command: [kworker/2:1-events] pid: 33 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: systemd-journald pid: 110 mem: 6.89 MiB (0.1%) 
           5: cpu: 0.3% command: systemd-udevd pid: 145 mem: 3.82 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.7 MiB (0.3%) command: packagekitd pid: 920 cpu: 0.1% 
           2: mem: 7.97 MiB (0.2%) command: init pid: 1 cpu: 2.5% 
           3: mem: 7.15 MiB (0.1%) command: polkitd pid: 924 cpu: 0.0% 
           4: mem: 6.98 MiB (0.1%) command: systemd pid: 581 cpu: 0.0% 
           5: mem: 6.89 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.3% 
Info:      Processes: 136 Uptime: 3m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.0.37

Benchmark #9350 - Brand: SanDisk Cruzer Blade