Benchmark #9351 - pibenchmarks.com

Brand: Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
#138 / 1,700
132
#1,119 / 1,700
#27 / 69
#3 / 20
1,862
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.sg

Overview
2020-02-18 13:01:31
#9,351
1,268
-594 (-46.85%)
Waperr
HTS545050B9A300 on Pi 4 using Ugreen SATA to USB adapter

Storage Details
Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
500G
HDD
Hitachi
HTS545050B9A300
SATA
3.00
5,000
2109:0715
0x2109
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
67.3 MB/s
77.82 MB/s
216 MB/s
331 IOPS
333 IOPS
1,327 KB/s
1,334 KB/s
23,170 KB/s
15,683 KB/s
488 KB/s
1,279 KB/s

inxi Results
System: Host: malinka Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 elevator=deadline fsck.repair=yes quiet splash plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 4 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 682.6 MiB (17.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 183x38 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 495.57 GiB used: 8.52 GiB (1.7%) ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Hitachi model: HTS545050B9A300 size: 465.76 GiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: PB4O scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 448.96 GiB size: 441.42 GiB (98.32%) used: 8.47 GiB (1.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: f29268c8-a443-4119-bf23-fae06818db9a ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: A005-B1A5 ID-3: swap-1 size: 16.77 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda2 label: N/A uuid: f039525e-53c5-41c6-9de0-023d0a655afb Unmounted: ID-1: /dev/mmcblk0p1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: 9296-40D7 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 85b7ba75-c294-4b45-8aa2-9e9b1da1f615 ID-4: /dev/mmcblk0p7 size: 26.65 GiB fs: ext4 label: root uuid: bb2f8f7f-fd7d-478e-9044-b0007e22b92b ID-5: /dev/mmcblk0p8 size: 512.0 MiB fs: ext4 label: data uuid: ac42ce5a-17d2-4e37-a3fb-c2575cf2c4fa USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0715 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 5.5% command: influxd pid: 15282 mem: 150.8 MiB (3.8%) 2: cpu: 2.3% command: htop pid: 1456 mem: 3.16 MiB (0.0%) 3: cpu: 1.2% command: telegraf pid: 16276 mem: 46.0 MiB (1.1%) 4: cpu: 0.6% command: watch pid: 3103 mem: 2.47 MiB (0.0%) 5: cpu: 0.5% command: hass started by: python3 pid: 779 mem: 62.3 MiB (1.5%) Memory top: 5 1: mem: 159.9 MiB (4.0%) command: pihole-ftl pid: 768 cpu: 0.0% 2: mem: 150.8 MiB (3.8%) command: influxd pid: 15282 cpu: 5.5% 3: mem: 62.3 MiB (1.5%) command: hass started by: python3 pid: 779 cpu: 0.5% 4: mem: 52.0 MiB (1.3%) command: systemd-journald pid: 109 cpu: 0.0% 5: mem: 48.4 MiB (1.2%) command: grafana-server pid: 25550 cpu: 0.1% Info: Processes: 159 Uptime: 1d 23h 50m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: malinka Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 elevator=deadline 
           fsck.repair=yes quiet splash plymouth.ignore-serial-consoles root=/dev/sda1 
           rootfstype=ext4 rootwait 
           Console: tty 4 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 682.6 MiB (17.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 183x38 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 495.57 GiB used: 8.52 GiB (1.7%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Hitachi model: HTS545050B9A300 size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: PB4O scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 448.96 GiB size: 441.42 GiB (98.32%) used: 8.47 GiB (1.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: f29268c8-a443-4119-bf23-fae06818db9a 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: A005-B1A5 
           ID-3: swap-1 size: 16.77 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda2 label: N/A 
           uuid: f039525e-53c5-41c6-9de0-023d0a655afb 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: 9296-40D7 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 85b7ba75-c294-4b45-8aa2-9e9b1da1f615 
           ID-4: /dev/mmcblk0p7 size: 26.65 GiB fs: ext4 label: root 
           uuid: bb2f8f7f-fd7d-478e-9044-b0007e22b92b 
           ID-5: /dev/mmcblk0p8 size: 512.0 MiB fs: ext4 label: data 
           uuid: ac42ce5a-17d2-4e37-a3fb-c2575cf2c4fa 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 2109:0715 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 5.5% command: influxd pid: 15282 mem: 150.8 MiB (3.8%) 
           2: cpu: 2.3% command: htop pid: 1456 mem: 3.16 MiB (0.0%) 
           3: cpu: 1.2% command: telegraf pid: 16276 mem: 46.0 MiB (1.1%) 
           4: cpu: 0.6% command: watch pid: 3103 mem: 2.47 MiB (0.0%) 
           5: cpu: 0.5% command: hass started by: python3 pid: 779 mem: 62.3 MiB (1.5%) 
           Memory top: 5 
           1: mem: 159.9 MiB (4.0%) command: pihole-ftl pid: 768 cpu: 0.0% 
           2: mem: 150.8 MiB (3.8%) command: influxd pid: 15282 cpu: 5.5% 
           3: mem: 62.3 MiB (1.5%) command: hass started by: python3 pid: 779 cpu: 0.5% 
           4: mem: 52.0 MiB (1.3%) command: systemd-journald pid: 109 cpu: 0.0% 
           5: mem: 48.4 MiB (1.2%) command: grafana-server pid: 25550 cpu: 0.1% 
Info:      Processes: 159 Uptime: 1d 23h 50m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #9351 - Brand: Hitachi TravelStar 5400RPM