Benchmark #9573 - pibenchmarks.com

Brand: Samsung 850 EVO mSATA
SSD (mSATA)
#265 / 1,672
51
#401 / 1,672
#389 / 983
#4 / 69
7,750
	Amazon.com Amazon.ca Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.sg

Overview
2020-02-19 13:38:44
#9,573
9,066
+1,316 (+14.52%)
rezin8
Retest

Storage Details
Samsung 850 EVO mSATA
SSD (mSATA)
250G
SSD
Samsung
SSD850EVOmSATA250GB
mSATA
SATA
3.00
5,000
2109:0715
0x2109
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
199 MB/s
330.34 MB/s
315.26 MB/s
11,722 IOPS
22,212 IOPS
46,891 KB/s
88,850 KB/s
35,032 KB/s
30,635 KB/s
25,242 KB/s
33,018 KB/s

inxi Results
System: Host: piaware Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 202.3 MiB (10.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 167x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 262.61 GiB used: 3.26 GiB (1.2%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO size: 232.89 GiB block size: physical: 512 B logical: 512 B rev: EMT4 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.63 GiB size: 229.01 GiB (98.44%) used: 3.21 GiB (1.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.1 MiB (21.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Realtek RTL2838 DVB-T type: driver: usbfs interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0bda:2838 Device-2: 1-1.4:4 info: American Power Conversion Uninterruptible Power Supply type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 051d:0002 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0715 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/piaware-stretch.list 1: deb http: //flightaware.com/adsb/piaware/files/packages stretch piaware Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https: //ookla.bintray.com/debian buster main Active apt repos in: /etc/apt/sources.list.d/weewx.list 1: deb [arch=all] http: //weewx.com/apt/ squeeze main Processes: CPU top: 5 1: cpu: 8.1% command: dump1090-fa pid: 542 mem: 6.07 MiB (0.3%) 2: cpu: 1.5% command: init pid: 1 mem: 7.81 MiB (0.4%) 3: cpu: 0.5% command: piaware pid: 544 mem: 11.5 MiB (0.5%) 4: cpu: 0.4% command: systemd-journald pid: 103 mem: 6.83 MiB (0.3%) 5: cpu: 0.4% command: systemd-udevd pid: 141 mem: 3.86 MiB (0.1%) Memory top: 5 1: mem: 20.8 MiB (1.0%) command: weewxd started by: python pid: 456 cpu: 0.4% 2: mem: 11.5 MiB (0.5%) command: piaware pid: 544 cpu: 0.5% 3: mem: 10.7 MiB (0.5%) command: snmpd pid: 557 cpu: 0.1% 4: mem: 8.60 MiB (0.4%) command: fa-mlat-client pid: 621 cpu: 0.3% 5: mem: 7.81 MiB (0.4%) command: init pid: 1 cpu: 1.5% Info: Processes: 130 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: piaware Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=tty1 root=/dev/sda2 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 202.3 MiB (10.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 167x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 262.61 GiB used: 3.26 GiB (1.2%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO size: 232.89 GiB 
           block size: physical: 512 B logical: 512 B rev: EMT4 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.63 GiB size: 229.01 GiB (98.44%) used: 3.21 GiB (1.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.1 MiB (21.4%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Realtek RTL2838 DVB-T type:  driver: usbfs 
           interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0bda:2838 Device-2: 1-1.4:4 info: American Power Conversion Uninterruptible Power Supply 
           type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 051d:0002 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 2109:0715 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/piaware-stretch.list 
           1: deb http: //flightaware.com/adsb/piaware/files/packages stretch piaware
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
           1: deb https: //ookla.bintray.com/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/weewx.list 
           1: deb [arch=all] http: //weewx.com/apt/ squeeze main
Processes: CPU top: 5 
           1: cpu: 8.1% command: dump1090-fa pid: 542 mem: 6.07 MiB (0.3%) 
           2: cpu: 1.5% command: init pid: 1 mem: 7.81 MiB (0.4%) 
           3: cpu: 0.5% command: piaware pid: 544 mem: 11.5 MiB (0.5%) 
           4: cpu: 0.4% command: systemd-journald pid: 103 mem: 6.83 MiB (0.3%) 
           5: cpu: 0.4% command: systemd-udevd pid: 141 mem: 3.86 MiB (0.1%) 
           Memory top: 5 
           1: mem: 20.8 MiB (1.0%) command: weewxd started by: python pid: 456 cpu: 0.4% 
           2: mem: 11.5 MiB (0.5%) command: piaware pid: 544 cpu: 0.5% 
           3: mem: 10.7 MiB (0.5%) command: snmpd pid: 557 cpu: 0.1% 
           4: mem: 8.60 MiB (0.4%) command: fa-mlat-client pid: 621 cpu: 0.3% 
           5: mem: 7.81 MiB (0.4%) command: init pid: 1 cpu: 1.5% 
Info:      Processes: 130 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #9573 - Brand: Samsung 850 EVO mSATA