Benchmark #9619 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#8 / 1,665
866
#427 / 1,665
#414 / 977
#48 / 370
7,406
	Amazon.com AliExpress

Overview
2020-02-19 17:51:02
#9,619
2,524
-4,882 (-193.42%)
giles
quirked

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
465.8G
SSD
JMicron
JMicronTech
2.10
480
2109:0562
0x2109
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
550 (+50)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.1 MB/s
30.37 MB/s
30.37 MB/s
3,987 IOPS
2,675 IOPS
15,950 KB/s
10,700 KB/s
10,660 KB/s
10,306 KB/s
9,558 KB/s
11,303 KB/s

inxi Results
System: Host: raspberrypi4 Kernel: 4.19.102-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:3840x2160M@30,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=b2938670-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 450.6 MiB (11.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 57x31 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.102-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 480.60 GiB used: 14.14 GiB (2.9%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 14.09 GiB (3.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: dec9b75e-816f-473a-9443-f49bec224f41 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: boot uuid: CE3E-FC2E ID-3: /mnt/cubox raw size: N/A size: 7.49 GiB used: 5.76 GiB (76.9%) fs: nfs4 remote: cubox:/ label: N/A uuid: N/A ID-4: /mnt/cuboxi raw size: N/A size: 28.91 GiB used: 22.67 GiB (78.4%) fs: nfs4 remote: cuboxi:/ label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 0070-D044 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 63c0ceca-4a01-43c4-a8ae-890740021d4e ID-4: /dev/mmcblk0p6 size: 512.0 MiB fs: ext4 label: Variety uuid: 139e4aad-975f-4291-bebd-e0dc420ebe35 ID-5: /dev/mmcblk0p7 size: 5.86 GiB fs: ext4 label: Data uuid: 91135a57-aacc-419d-a16b-443d1af65b09 ID-6: /dev/mmcblk0p9 size: 8.13 GiB fs: ext4 label: root uuid: 15c38978-946a-4002-8cc5-70ff6d643806 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Device-2: 1-1.2:4 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0562 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 9.6% command: init pid: 1 mem: 7.87 MiB (0.2%) 2: cpu: 5.5% command: xorg pid: 930 mem: 45.7 MiB (1.1%) 3: cpu: 3.6% command: mysqld pid: 611 mem: 85.7 MiB (2.1%) 4: cpu: 2.4% command: systemd-journald pid: 120 mem: 7.17 MiB (0.1%) 5: cpu: 2.4% command: dbus-daemon pid: 353 mem: 3.76 MiB (0.0%) Memory top: 5 1: mem: 85.7 MiB (2.1%) command: mysqld pid: 611 cpu: 3.6% 2: mem: 45.7 MiB (1.1%) command: xorg pid: 930 cpu: 5.5% 3: mem: 41.4 MiB (1.0%) command: apache2 pid: 947 cpu: 0.8% 4: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 521 cpu: 0.0% 5: mem: 22.3 MiB (0.5%) command: apache2 pid: 954 cpu: 0.0% Info: Processes: 167 Uptime: N/A Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi4 Kernel: 4.19.102-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:3840x2160M@30,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=b2938670-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 450.6 MiB (11.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 57x31 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.102-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 480.60 GiB used: 14.14 GiB (2.9%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 465.76 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0204 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 14.09 GiB (3.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: dec9b75e-816f-473a-9443-f49bec224f41 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: boot uuid: CE3E-FC2E 
           ID-3: /mnt/cubox raw size: N/A size: 7.49 GiB used: 5.76 GiB (76.9%) fs: nfs4 
           remote: cubox:/ label: N/A uuid: N/A 
           ID-4: /mnt/cuboxi raw size: N/A size: 28.91 GiB used: 22.67 GiB (78.4%) fs: nfs4 
           remote: cuboxi:/ label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 0070-D044 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 63c0ceca-4a01-43c4-a8ae-890740021d4e 
           ID-4: /dev/mmcblk0p6 size: 512.0 MiB fs: ext4 label: Variety 
           uuid: 139e4aad-975f-4291-bebd-e0dc420ebe35 
           ID-5: /dev/mmcblk0p7 size: 5.86 GiB fs: ext4 label: Data 
           uuid: 91135a57-aacc-419d-a16b-443d1af65b09 
           ID-6: /dev/mmcblk0p9 size: 8.13 GiB fs: ext4 label: root 
           uuid: 15c38978-946a-4002-8cc5-70ff6d643806 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Device-2: 1-1.2:4 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0562 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 9.6% command: init pid: 1 mem: 7.87 MiB (0.2%) 
           2: cpu: 5.5% command: xorg pid: 930 mem: 45.7 MiB (1.1%) 
           3: cpu: 3.6% command: mysqld pid: 611 mem: 85.7 MiB (2.1%) 
           4: cpu: 2.4% command: systemd-journald pid: 120 mem: 7.17 MiB (0.1%) 
           5: cpu: 2.4% command: dbus-daemon pid: 353 mem: 3.76 MiB (0.0%) 
           Memory top: 5 
           1: mem: 85.7 MiB (2.1%) command: mysqld pid: 611 cpu: 3.6% 
           2: mem: 45.7 MiB (1.1%) command: xorg pid: 930 cpu: 5.5% 
           3: mem: 41.4 MiB (1.0%) command: apache2 pid: 947 cpu: 0.8% 
           4: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 521 cpu: 0.0% 
           5: mem: 22.3 MiB (0.5%) command: apache2 pid: 954 cpu: 0.0% 
Info:      Processes: 167 Uptime: N/A Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #9619 - Brand: Undentified JMicron USB to SATA Adapter