Benchmark #9642 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#248 / 1,700
67
#1,270 / 1,700
#24 / 94
#25 / 89
1,324
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2020-02-20 00:30:55
#9,642
605
-719 (-118.84%)
Anonymous
Lexar USB3.0 64GB on Pi 4 using USB Port

Storage Details
Lexar USB Flash Drive
USB Flash
59.5G
USB Flash
Lexar
USBFlashDrive
3.00
5,000
05dc:a838
0x05dc (Lexar Media, Inc.)
0xa838 (JumpDrive Tough)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Kali GNU/Linux Rolling
aarch64

Benchmark Results
16.5 MB/s
103.7 MB/s
75.85 MB/s
70 IOPS
822 IOPS
280 KB/s
3,290 KB/s
16,209 KB/s
12,975 KB/s
2,207 KB/s
212 KB/s

inxi Results
System: Host: kali Kernel: 4.19.93-Re4son-v8l+ aarch64 bits: 64 compiler: gcc v: 8.2.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=2 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0 Desktop: Xfce 4.14.1 tk: Gtk 3.24.10 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 Distro: Kali GNU/Linux 2020.1 base: Debian testing Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.72 GiB used: 516.8 MiB (13.6%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: x11 server: X.Org 1.20.6 driver: fbdev unloaded: modesetting resolution: 1680x1050~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-Re4son-v8l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 89.35 GiB used: 4.53 GiB (5.1%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 59.62 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.50 GiB size: 58.58 GiB (98.45%) used: 4.46 GiB (7.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 2cdf8297-a77f-405f-a24f-fc079310c30c ID-2: /boot raw size: 122.1 MiB size: 121.8 MiB (99.79%) used: 69.9 MiB (57.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 7026-017B Unmounted: ID-1: /dev/mmcblk0p2 size: 28.79 GiB fs: ext4 label: N/A uuid: 2cdf8297-a77f-405f-a24f-fc079310c30c ID-2: /dev/sda1 size: 122.1 MiB fs: vfat label: N/A uuid: 7026-017B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Cherry Keyboard type: Keyboard,HID driver: cherry,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046a:0023 Device-2: 1-1.4:4 info: HP HID-compliant mouse type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 03f0:1198 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: Lexar Media JumpDrive Tough type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 05dc:a838 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //http.kali.org/kali kali-rolling main non-free contrib 2: deb-src http: //http.kali.org/kali kali-rolling main non-free contrib Active apt repos in: /etc/apt/sources.list.d/re4son.list 1: deb http: //http.re4son-kernel.com/re4son kali-pi main Processes: CPU top: 5 1: cpu: 4.4% command: xorg pid: 538 mem: 129.8 MiB (3.4%) 2: cpu: 1.7% command: qterminal pid: 867 mem: 84.9 MiB (2.2%) 3: cpu: 0.7% command: xfwm4 pid: 723 mem: 96.9 MiB (2.5%) 4: cpu: 0.7% command: xfce4-panel pid: 732 mem: 47.0 MiB (1.2%) 5: cpu: 0.6% command: nm-applet pid: 804 mem: 50.3 MiB (1.3%) Memory top: 5 1: mem: 129.8 MiB (3.4%) command: xorg pid: 538 cpu: 4.4% 2: mem: 96.9 MiB (2.5%) command: xfwm4 pid: 723 cpu: 0.7% 3: mem: 84.9 MiB (2.2%) command: qterminal pid: 867 cpu: 1.7% 4: mem: 83.2 MiB (2.1%) command: qterminal pid: 893 cpu: 0.4% 5: mem: 56.2 MiB (1.4%) command: xfdesktop pid: 787 cpu: 0.2% Info: Processes: 151 Uptime: 15m Init: systemd v: 244 runlevel: 5 Compilers: gcc: 9.2.1 alt: 9 Client: shell wrapper v: 5.0.11-release inxi: 3.0.37

inxi Results

System:    Host: kali Kernel: 4.19.93-Re4son-v8l+ aarch64 bits: 64 compiler: gcc v: 8.2.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1680 
           bcm2708_fb.fbheight=1050 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=2 
           console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 rootwait rootflags=noload net.ifnames=0 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.10 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: Kali GNU/Linux 2020.1 base: Debian testing 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.72 GiB used: 516.8 MiB (13.6%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: x11 server: X.Org 1.20.6 driver: fbdev unloaded: modesetting 
           resolution: 1680x1050~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-Re4son-v8l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 89.35 GiB used: 4.53 GiB (5.1%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 59.62 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.50 GiB size: 58.58 GiB (98.45%) used: 4.46 GiB (7.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 2cdf8297-a77f-405f-a24f-fc079310c30c 
           ID-2: /boot raw size: 122.1 MiB size: 121.8 MiB (99.79%) used: 69.9 MiB (57.4%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 7026-017B 
Unmounted: ID-1: /dev/mmcblk0p2 size: 28.79 GiB fs: ext4 label: N/A 
           uuid: 2cdf8297-a77f-405f-a24f-fc079310c30c 
           ID-2: /dev/sda1 size: 122.1 MiB fs: vfat label: N/A uuid: 7026-017B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Cherry Keyboard type: Keyboard,HID driver: cherry,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046a:0023 
           Device-2: 1-1.4:4 info: HP HID-compliant mouse type: Mouse,Keyboard 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 03f0:1198 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: Lexar Media JumpDrive Tough type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 05dc:a838 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //http.kali.org/kali kali-rolling main non-free contrib
           2: deb-src http: //http.kali.org/kali kali-rolling main non-free contrib
           Active apt repos in: /etc/apt/sources.list.d/re4son.list 
           1: deb http: //http.re4son-kernel.com/re4son kali-pi main
Processes: CPU top: 5 
           1: cpu: 4.4% command: xorg pid: 538 mem: 129.8 MiB (3.4%) 
           2: cpu: 1.7% command: qterminal pid: 867 mem: 84.9 MiB (2.2%) 
           3: cpu: 0.7% command: xfwm4 pid: 723 mem: 96.9 MiB (2.5%) 
           4: cpu: 0.7% command: xfce4-panel pid: 732 mem: 47.0 MiB (1.2%) 
           5: cpu: 0.6% command: nm-applet pid: 804 mem: 50.3 MiB (1.3%) 
           Memory top: 5 
           1: mem: 129.8 MiB (3.4%) command: xorg pid: 538 cpu: 4.4% 
           2: mem: 96.9 MiB (2.5%) command: xfwm4 pid: 723 cpu: 0.7% 
           3: mem: 84.9 MiB (2.2%) command: qterminal pid: 867 cpu: 1.7% 
           4: mem: 83.2 MiB (2.1%) command: qterminal pid: 893 cpu: 0.4% 
           5: mem: 56.2 MiB (1.4%) command: xfdesktop pid: 787 cpu: 0.2% 
Info:      Processes: 151 Uptime: 15m Init: systemd v: 244 runlevel: 5 Compilers: gcc: 9.2.1 
           alt: 9 Client: shell wrapper v: 5.0.11-release inxi: 3.0.37

Benchmark #9642 - Brand: Lexar USB Flash Drive