Benchmark #9651 - pibenchmarks.com

Brand: OCZ Vertex Series
SSD (2.5" SATA)
#391 / 1,539
18
#870 / 1,539
#799 / 875
#317 / 363
3,306
	Amazon.com AliExpress Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.se Amazon.sg

Overview
2020-02-20 01:51:15
#9,651
1,809
-1,497 (-82.75%)
Anonymous
OCZ Vertex SSD on Corsair branded ASMedia ASM115X dongle

Storage Details
OCZ Vertex Series
SSD (2.5" SATA)
64G
SSD
OCZ
VERTEX
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
14.4 MB/s
94.89 MB/s
230.88 MB/s
372 IOPS
6,168 IOPS
1,488 KB/s
24,674 KB/s
28,529 KB/s
19,312 KB/s
17,887 KB/s
1,879 KB/s

inxi Results
System: Host: srv-mail01 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 413.2 MiB (20.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 242x41 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 74.46 GiB used: 10.78 GiB (14.5%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: OCZ model: VERTEX size: 59.63 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 11.49 GiB size: 11.25 GiB (97.89%) used: 9.76 GiB (86.8%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 12460d63-321c-4082-9aa5-1069a6513eee ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA ID-3: /mnt/sda1 raw size: 48.12 GiB size: 47.12 GiB (97.91%) used: 986.1 MiB (2.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: a348c64f-9132-4821-b9af-6cab147388e3 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.6% command: varnishncsa pid: 728 mem: 19.2 MiB (0.9%) 2: cpu: 0.3% command: smartd pid: 4975 mem: 3.18 MiB (0.1%) 3: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 4577 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: bash pid: 4580 mem: 2.71 MiB (0.1%) 5: cpu: 0.1% command: miniserv.pl started by: perl pid: 1032 mem: 18.6 MiB (0.9%) Memory top: 5 1: mem: 70.2 MiB (3.6%) command: mysqld pid: 13096 cpu: 0.0% 2: mem: 28.8 MiB (1.4%) command: winbindd: pid: 1248 cpu: 0.0% 3: mem: 25.5 MiB (1.3%) command: varnishd pid: 727 cpu: 0.0% 4: mem: 24.7 MiB (1.2%) command: winbindd pid: 1233 cpu: 0.0% 5: mem: 22.5 MiB (1.1%) command: php-fpm: pid: 510 cpu: 0.0% Info: Processes: 172 Uptime: 11d 21h 13m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: srv-mail01 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 413.2 MiB (20.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 242x41 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 74.46 GiB used: 10.78 GiB (14.5%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: OCZ model: VERTEX size: 59.63 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 11.49 GiB size: 11.25 GiB (97.89%) used: 9.76 GiB (86.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 12460d63-321c-4082-9aa5-1069a6513eee 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
           ID-3: /mnt/sda1 raw size: 48.12 GiB size: 47.12 GiB (97.91%) used: 986.1 MiB (2.0%) 
           fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A 
           uuid: a348c64f-9132-4821-b9af-6cab147388e3 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.6% command: varnishncsa pid: 728 mem: 19.2 MiB (0.9%) 
           2: cpu: 0.3% command: smartd pid: 4975 mem: 3.18 MiB (0.1%) 
           3: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 4577 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: bash pid: 4580 mem: 2.71 MiB (0.1%) 
           5: cpu: 0.1% command: miniserv.pl started by: perl pid: 1032 mem: 18.6 MiB (0.9%) 
           Memory top: 5 
           1: mem: 70.2 MiB (3.6%) command: mysqld pid: 13096 cpu: 0.0% 
           2: mem: 28.8 MiB (1.4%) command: winbindd: pid: 1248 cpu: 0.0% 
           3: mem: 25.5 MiB (1.3%) command: varnishd pid: 727 cpu: 0.0% 
           4: mem: 24.7 MiB (1.2%) command: winbindd pid: 1233 cpu: 0.0% 
           5: mem: 22.5 MiB (1.1%) command: php-fpm: pid: 510 cpu: 0.0% 
Info:      Processes: 172 Uptime: 11d 21h 13m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #9651 - Brand: OCZ Vertex Series