Benchmark #9746 - pibenchmarks.com

Brand: Netac SD (SDXXX)
C10 V10 U1
#56 / 1,701
335
#1,419 / 1,701
#265 / 405
1,045
	Amazon.com AliExpress Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.fr Amazon.it Amazon.sg

Overview
2020-02-20 13:26:32
#9,746
757
-288 (-38.04%)
Anonymous

Secure Digital (SD) Card Details
Netac SD (SDXXX)
C10 V10 U1
3.5G
SD
Netac
SD
SDHC
5.00
0x12
4V
0.2
10/2017
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
9.6 MB/s
40.39 MB/s
40.57 MB/s
226 IOPS
2,683 IOPS
904 KB/s
10,732 KB/s
8,843 KB/s
1,412 KB/s
7,780 KB/s
1,212 KB/s

inxi Results
System: Host: raspbx Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 364.8 MiB (9.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 134x84 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 149.02 GiB used: 2.34 GiB (1.6%) ID-1: /dev/mmcblk0 model: SD size: 29.78 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: P1 128G size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 3.49 GiB size: 3.41 GiB (97.60%) used: 2.29 GiB (67.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B ID-2: /dev/sda2 size: 20.00 GiB fs: ext4 label: rootfs uuid: 9d67e3a1-82f2-480a-9d6a-cfeaf848732e ID-3: /dev/sda3 size: 98.99 GiB fs: ext4 label: N/A uuid: 90f06ff6-a881-428d-a4c6-1bfbf8dd7a89 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:9561 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/php.list 1: deb https: //packages.sury.org/php/ buster main Active apt repos in: /etc/apt/sources.list.d/raspbx.list 1: deb http: //repo.raspbx.org/apt/debian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.2% command: init pid: 1 mem: 8.08 MiB (0.2%) 2: cpu: 3.1% command: asterisk pid: 1178 mem: 48.9 MiB (1.2%) 3: cpu: 1.6% command: pm2 pid: 1387 mem: 38.7 MiB (0.9%) 4: cpu: 0.9% command: mysqld pid: 722 mem: 68.1 MiB (1.7%) 5: cpu: 0.3% command: [kworker/0:1h-mmc_complete] pid: 77 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 68.1 MiB (1.7%) command: mysqld pid: 722 cpu: 0.9% 2: mem: 48.9 MiB (1.2%) command: asterisk pid: 1178 cpu: 3.1% 3: mem: 38.7 MiB (0.9%) command: pm2 pid: 1387 cpu: 1.6% 4: mem: 26.9 MiB (0.6%) command: apache2 pid: 725 cpu: 0.1% 5: mem: 16.3 MiB (0.4%) command: smbd pid: 724 cpu: 0.1% Info: Processes: 145 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspbx Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 364.8 MiB (9.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 134x84 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 149.02 GiB used: 2.34 GiB (1.6%) 
           ID-1: /dev/mmcblk0 model: SD size: 29.78 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB model: P1 128G size: 119.24 GiB block size: physical: 4096 B 
           logical: 512 B rev: 1507 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 3.49 GiB size: 3.41 GiB (97.60%) used: 2.29 GiB (67.1%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
           ID-2: /dev/sda2 size: 20.00 GiB fs: ext4 label: rootfs 
           uuid: 9d67e3a1-82f2-480a-9d6a-cfeaf848732e 
           ID-3: /dev/sda3 size: 98.99 GiB fs: ext4 label: N/A 
           uuid: 90f06ff6-a881-428d-a4c6-1bfbf8dd7a89 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:9561 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/php.list 
           1: deb https: //packages.sury.org/php/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspbx.list 
           1: deb http: //repo.raspbx.org/apt/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.2% command: init pid: 1 mem: 8.08 MiB (0.2%) 
           2: cpu: 3.1% command: asterisk pid: 1178 mem: 48.9 MiB (1.2%) 
           3: cpu: 1.6% command: pm2 pid: 1387 mem: 38.7 MiB (0.9%) 
           4: cpu: 0.9% command: mysqld pid: 722 mem: 68.1 MiB (1.7%) 
           5: cpu: 0.3% command: [kworker/0:1h-mmc_complete] pid: 77 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 68.1 MiB (1.7%) command: mysqld pid: 722 cpu: 0.9% 
           2: mem: 48.9 MiB (1.2%) command: asterisk pid: 1178 cpu: 3.1% 
           3: mem: 38.7 MiB (0.9%) command: pm2 pid: 1387 cpu: 1.6% 
           4: mem: 26.9 MiB (0.6%) command: apache2 pid: 725 cpu: 0.1% 
           5: mem: 16.3 MiB (0.4%) command: smbd pid: 724 cpu: 0.1% 
Info:      Processes: 145 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #9746 - Brand: Netac SD (SDXXX)