Benchmark #9949 - pibenchmarks.com

Brand: Panasonic SD
A1 C10 V10 U1
#129 / 1,701
147
#1,386 / 1,701
#244 / 405
1,100
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2020-02-21 23:11:24
#9,949
853
-247 (-28.96%)
Anonymous
SanDisk on Pi3

Secure Digital (SD) Card Details
Panasonic SD
A1 C10 V10 U1
28.9G
SD
Panasonic
SD32G
SDHC
5.00
0x01
PA
5.0
04/2018
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
4.2 MB/s
21.62 MB/s
21.76 MB/s
570 IOPS
1,764 IOPS
2,280 KB/s
7,057 KB/s
8,289 KB/s
2,981 KB/s
7,054 KB/s
2,897 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_MEASUREMENT = "en_IL.UTF-8", LC_PAPER = "en_IL.UTF-8", LC_MONETARY = "en_IL.UTF-8", LC_NAME = "en_IL.UTF-8", LC_ADDRESS = "en_IL.UTF-8", LC_NUMERIC = "en_IL.UTF-8", LC_TELEPHONE = "en_IL.UTF-8", LC_IDENTIFICATION = "en_IL.UTF-8", LC_TIME = "en_IL.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Host: raspberrypi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=b28ab416-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 539.1 MiB (53.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 94x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: noprefixroute scope: global IP v6: scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: flags 800 scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 3.67 TiB used: 2.20 TiB (60.0%) ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Seagate model: ST1000LM024 HN-M101MBB size: 931.51 GiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: 0143 scheme: MBR ID-3: /dev/sdb type: USB model: TO Exter nal USB 3.0 size: 2.73 TiB block size: physical: 4096 B logical: 512 B rev: 0103 scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.92 GiB size: 28.45 GiB (98.37%) used: 22.53 GiB (79.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: fd695ef5-f047-44bd-b159-2a78c53af20a ID-2: /boot raw size: 43.2 MiB size: 42.5 MiB (98.42%) used: 22.3 MiB (52.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3725-1C05 ID-3: /media/USBHDD1 raw size: 931.51 GiB size: 916.77 GiB (98.42%) used: 816.70 GiB (89.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: cff03472-7c22-41a6-84c8-cfb104b35b63 ID-4: /media/USBHDD2 raw size: 2.73 TiB size: 2.69 TiB (98.43%) used: 1.38 TiB (51.4%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: data3 uuid: 0d71f52b-0815-4dd9-97d2-08a16dd4dad6 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.4:4 info: Seagate RSS LLC Backup Plus Slim type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab21 Device-3: 1-1.5:5 info: Assmann Electronic Digitus DA-71114 SATA type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0080:a001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge Active apt repos in: /etc/apt/sources.list.d/mono-official-stable.list 1: deb https: //download.mono-project.com/repo/debian stable-raspbianstretch main Active apt repos in: /etc/apt/sources.list.d/owncloud.list 1: deb http: //download.owncloud.org/download/repositories/production/Debian_9.0/ / Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/sonarr.list 1: deb http: //apt.sonarr.tv/ master main Processes: CPU top: 5 1: cpu: 51.6% command: funds.py started by: python pid: 30716 mem: 31.8 MiB (3.4%) 2: cpu: 15.2% command: hass started by: python3 pid: 30619 mem: 57.0 MiB (6.1%) 3: cpu: 9.4% command: deluged started by: python pid: 32322 mem: 73.0 MiB (7.8%) 4: cpu: 0.8% command: mono pid: 31690 mem: 115.7 MiB (12.4%) 5: cpu: 0.7% command: [kswapd0] pid: 46 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 115.7 MiB (12.4%) command: mono pid: 31690 cpu: 0.8% 2: mem: 73.0 MiB (7.8%) command: deluged started by: python pid: 32322 cpu: 9.4% 3: mem: 66.9 MiB (7.2%) command: java pid: 595 cpu: 0.4% 4: mem: 57.0 MiB (6.1%) command: hass started by: python3 pid: 30619 cpu: 15.2% 5: mem: 31.8 MiB (3.4%) command: funds.py started by: python pid: 30716 cpu: 51.6% Info: Processes: 156 Uptime: 10d 12h 51m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_MEASUREMENT = "en_IL.UTF-8",
	LC_PAPER = "en_IL.UTF-8",
	LC_MONETARY = "en_IL.UTF-8",
	LC_NAME = "en_IL.UTF-8",
	LC_ADDRESS = "en_IL.UTF-8",
	LC_NUMERIC = "en_IL.UTF-8",
	LC_TELEPHONE = "en_IL.UTF-8",
	LC_IDENTIFICATION = "en_IL.UTF-8",
	LC_TIME = "en_IL.UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Host: raspberrypi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=b28ab416-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 539.1 MiB (53.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 94x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: flags 800 scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.67 TiB used: 2.20 TiB (60.0%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Seagate model: ST1000LM024 HN-M101MBB size: 931.51 GiB 
           block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: 0143 scheme: MBR 
           ID-3: /dev/sdb type: USB model: TO Exter nal USB 3.0 size: 2.73 TiB block size: 
           physical: 4096 B logical: 512 B rev: 0103 scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.92 GiB size: 28.45 GiB (98.37%) used: 22.53 GiB (79.2%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: fd695ef5-f047-44bd-b159-2a78c53af20a 
           ID-2: /boot raw size: 43.2 MiB size: 42.5 MiB (98.42%) used: 22.3 MiB (52.5%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3725-1C05 
           ID-3: /media/USBHDD1 raw size: 931.51 GiB size: 916.77 GiB (98.42%) 
           used: 816.70 GiB (89.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A 
           uuid: cff03472-7c22-41a6-84c8-cfb104b35b63 
           ID-4: /media/USBHDD2 raw size: 2.73 TiB size: 2.69 TiB (98.43%) used: 1.38 TiB (51.4%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: data3 
           uuid: 0d71f52b-0815-4dd9-97d2-08a16dd4dad6 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.4:4 info: Seagate RSS LLC Backup Plus Slim type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab21 
           Device-3: 1-1.5:5 info: Assmann Electronic Digitus DA-71114 SATA type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0080:a001 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge
           Active apt repos in: /etc/apt/sources.list.d/mono-official-stable.list 
           1: deb https: //download.mono-project.com/repo/debian stable-raspbianstretch main
           Active apt repos in: /etc/apt/sources.list.d/owncloud.list 
           1: deb http: //download.owncloud.org/download/repositories/production/Debian_9.0/ /
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
           Active apt repos in: /etc/apt/sources.list.d/sonarr.list 
           1: deb http: //apt.sonarr.tv/ master main
Processes: CPU top: 5 
           1: cpu: 51.6% command: funds.py started by: python pid: 30716 mem: 31.8 MiB (3.4%) 
           2: cpu: 15.2% command: hass started by: python3 pid: 30619 mem: 57.0 MiB (6.1%) 
           3: cpu: 9.4% command: deluged started by: python pid: 32322 mem: 73.0 MiB (7.8%) 
           4: cpu: 0.8% command: mono pid: 31690 mem: 115.7 MiB (12.4%) 
           5: cpu: 0.7% command: [kswapd0] pid: 46 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 115.7 MiB (12.4%) command: mono pid: 31690 cpu: 0.8% 
           2: mem: 73.0 MiB (7.8%) command: deluged started by: python pid: 32322 cpu: 9.4% 
           3: mem: 66.9 MiB (7.2%) command: java pid: 595 cpu: 0.4% 
           4: mem: 57.0 MiB (6.1%) command: hass started by: python3 pid: 30619 cpu: 15.2% 
           5: mem: 31.8 MiB (3.4%) command: funds.py started by: python pid: 30716 cpu: 51.6% 
Info:      Processes: 156 Uptime: 10d 12h 51m Init: systemd v: 232 runlevel: 5 Compilers: 
           gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #9949 - Brand: Panasonic SD