Benchmark #10526 - pibenchmarks.com

Brand: Western Digital My Passport SSD
SSD (Portable)
#193 / 1,665
74
#727 / 1,665
#704 / 977
#107 / 144
5,733
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-26 07:27:54
#10,526
1,304
-4,429 (-339.65%)
dennyf
WD 500GB My Passport on Pi 3B+

Storage Details
Western Digital My Passport SSD
SSD (Portable)
500G
SSD
WDC
MyPassport261B
M.2
SATA
2.10
480
1058:261b
0x1058
0x261b (iR1610)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
1 GB
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
28.4 MB/s
27.57 MB/s
27.43 MB/s
1,004 IOPS
1,833 IOPS
4,017 KB/s
7,334 KB/s
9,030 KB/s
3,368 KB/s
6,654 KB/s
4,540 KB/s

inxi Results
System: Host: inbloom0 Kernel: 4.14.79-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1003.2 MiB used: 186.0 MiB (18.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.14.79-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 chip ID: 0424:7800 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X WAN IP: 68.6.X.X Drives: Local Storage: total: 465.77 GiB used: 4.89 GiB (1.0%) ID-1: /dev/sda type: USB vendor: Western Digital model: WD My Passport 261B size: 465.77 GiB block size: physical: 512 B logical: 512 B rev: 3005 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.65 GiB size: 14.36 GiB (98.00%) used: 4.87 GiB (33.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: f65ca0e1-ccd6-4f17-9bb5-c39758553b67 ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 22.4 MiB (8.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 25C3-7A22 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.3:5 info: Western Digital type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:261b Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 2.6% command: init pid: 1 mem: 5.97 MiB (0.6%) 2: cpu: 1.3% command: track-sensors.py started by: python pid: 581 mem: 19.1 MiB (2.0%) 3: cpu: 0.8% command: [kworker/u8:3] pid: 799 mem: 0.00 MiB (0.0%) 4: cpu: 0.7% command: perl pid: 517 mem: 21.3 MiB (2.3%) 5: cpu: 0.5% command: [usb-storage] pid: 72 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 21.3 MiB (2.3%) command: perl pid: 517 cpu: 0.7% 2: mem: 19.4 MiB (2.0%) command: php-fpm: pid: 508 cpu: 0.0% 3: mem: 19.1 MiB (2.0%) command: track-sensors.py started by: python pid: 581 cpu: 1.3% 4: mem: 11.0 MiB (1.1%) command: vncserver-x11-core pid: 518 cpu: 0.0% 5: mem: 10.9 MiB (1.1%) command: packagekitd pid: 940 cpu: 0.2% Info: Processes: 125 Uptime: 2m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Shell: Storage.sh inxi: 3.0.37

inxi Results

System:
  Host: inbloom0 Kernel: 4.14.79-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
  parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 
  bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 
  console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait 
  Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 
  details: BCM2835 rev: a020d3 
Memory:
  RAM: total: 1003.2 MiB used: 186.0 MiB (18.5%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A 
  bogomips: 358 
  Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 
  3: 1400 4: 1400 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.14.79-v7+ 
Network:
  Device-1: Standard Microsystems type: USB driver: lan78xx 
  bus ID: 1-1.1.1:4 chip ID: 0424:7800 
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  WAN IP: 68.6.X.X 
Drives:
  Local Storage: total: 465.77 GiB used: 4.89 GiB (1.0%) 
  ID-1: /dev/sda type: USB vendor: Western Digital 
  model: WD My Passport 261B size: 465.77 GiB block size: physical: 512 B 
  logical: 512 B rev: 3005 scheme: MBR 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 14.65 GiB size: 14.36 GiB (98.00%) 
  used: 4.87 GiB (33.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: N/A uuid: f65ca0e1-ccd6-4f17-9bb5-c39758553b67 
  ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) 
  used: 22.4 MiB (8.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A 
  uuid: 25C3-7A22 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network 
  driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
  Device-2: 1-1.3:5 info: Western Digital type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
  chip ID: 1058:261b 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ stretch main ui
Processes:
  CPU top: 5 
  1: cpu: 2.6% command: init pid: 1 mem: 5.97 MiB (0.6%) 
  2: cpu: 1.3% command: track-sensors.py started by: python pid: 581 
  mem: 19.1 MiB (2.0%) 
  3: cpu: 0.8% command: [kworker/u8:3] pid: 799 mem: 0.00 MiB (0.0%) 
  4: cpu: 0.7% command: perl pid: 517 mem: 21.3 MiB (2.3%) 
  5: cpu: 0.5% command: [usb-storage] pid: 72 mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 21.3 MiB (2.3%) command: perl pid: 517 cpu: 0.7% 
  2: mem: 19.4 MiB (2.0%) command: php-fpm: pid: 508 cpu: 0.0% 
  3: mem: 19.1 MiB (2.0%) command: track-sensors.py started by: python 
  pid: 581 cpu: 1.3% 
  4: mem: 11.0 MiB (1.1%) command: vncserver-x11-core pid: 518 cpu: 0.0% 
  5: mem: 10.9 MiB (1.1%) command: packagekitd pid: 940 cpu: 0.2% 
Info:
  Processes: 125 Uptime: 2m Init: systemd v: 232 runlevel: 3 
  target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Shell: Storage.sh 
  inxi: 3.0.37

Benchmark #10526 - Brand: Western Digital My Passport SSD