Benchmark #10528 - pibenchmarks.com

Brand: Western Digital My Passport SSD
SSD (Portable)
#193 / 1,665
74
#727 / 1,665
#704 / 977
#107 / 144
5,733
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-26 08:09:16
#10,528
2,166
-3,567 (-164.68%)
dennyf
WD 500GB MyPassport on PI4 USB3

Storage Details
Western Digital My Passport SSD
SSD (Portable)
500G
SSD
WDC
MyPassport261B
M.2
SATA
3.10
5,000
1058:261b
0x1058
0x261b (iR1610)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
80.2 MB/s
276.33 MB/s
228.84 MB/s
1,621 IOPS
6,595 IOPS
6,484 KB/s
26,383 KB/s
9,030 KB/s
4,173 KB/s
8,483 KB/s
4,501 KB/s

inxi Results
System: Host: inbloom0 Kernel: 4.19.66-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x720@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 215.1 MiB (5.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X WAN IP: 68.6.X.X Drives: Local Storage: total: 495.49 GiB used: 4.89 GiB (1.0%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 500GB size: 465.77 GiB block size: physical: 4096 B logical: 512 B rev: 3005 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.65 GiB size: 14.36 GiB (98.00%) used: 4.87 GiB (33.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: f65ca0e1-ccd6-4f17-9bb5-c39758553b67 ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 22.4 MiB (8.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 25C3-7A22 Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: N/A uuid: 697E-B109 ID-2: /dev/mmcblk0p2 size: 29.36 GiB fs: ext4 label: N/A uuid: 5af0d3d8-20e3-44eb-807a-51546f468c2e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:4 info: Chicony Genius LuxeMate i200 Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0402 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: Western Digital type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:261b Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 2.0% command: init pid: 1 mem: 5.83 MiB (0.1%) 2: cpu: 1.0% command: track-sensors.py started by: python pid: 566 mem: 19.1 MiB (0.4%) 3: cpu: 1.0% command: packagekitd pid: 763 mem: 10.9 MiB (0.2%) 4: cpu: 0.7% command: bash pid: 630 mem: 2.62 MiB (0.0%) 5: cpu: 0.6% command: systemd-journald pid: 96 mem: 4.54 MiB (0.1%) Memory top: 5 1: mem: 21.4 MiB (0.5%) command: perl pid: 526 cpu: 0.6% 2: mem: 19.4 MiB (0.4%) command: php-fpm: pid: 520 cpu: 0.1% 3: mem: 19.1 MiB (0.4%) command: track-sensors.py started by: python pid: 566 cpu: 1.0% 4: mem: 13.4 MiB (0.3%) command: vncserver-x11-core pid: 528 cpu: 0.1% 5: mem: 10.9 MiB (0.2%) command: packagekitd pid: 763 cpu: 1.0% Info: Processes: 118 Uptime: 1m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Shell: Storage.sh inxi: 3.0.37

inxi Results

System:
  Host: inbloom0 Kernel: 4.19.66-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
  video=HDMI-A-1:1280x720@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
  vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
  console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 
  elevator=deadline fsck.repair=yes rootwait 
  Console: N/A dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 
  rev: c03111 
Memory:
  RAM: total: 3.89 GiB used: 215.1 MiB (5.4%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  WAN IP: 68.6.X.X 
Drives:
  Local Storage: total: 495.49 GiB used: 4.89 GiB (1.0%) 
  ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 500GB 
  size: 465.77 GiB block size: physical: 4096 B logical: 512 B 
  rev: 3005 scheme: MBR 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 14.65 GiB size: 14.36 GiB (98.00%) 
  used: 4.87 GiB (33.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: N/A uuid: f65ca0e1-ccd6-4f17-9bb5-c39758553b67 
  ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) 
  used: 22.4 MiB (8.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A 
  uuid: 25C3-7A22 
Unmounted:
  ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: N/A uuid: 697E-B109 
  ID-2: /dev/mmcblk0p2 size: 29.36 GiB fs: ext4 label: N/A 
  uuid: 5af0d3d8-20e3-44eb-807a-51546f468c2e 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.4:4 info: Chicony Genius LuxeMate i200 Keyboard 
  type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 
  speed: 1.5 Mb/s chip ID: 04f2:0402 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-2: 2-2:2 info: Western Digital type: Mass Storage driver: uas 
  interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:261b   Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ stretch main ui
Processes:
  CPU top: 5 
  1: cpu: 2.0% command: init pid: 1 mem: 5.83 MiB (0.1%) 
  2: cpu: 1.0% command: track-sensors.py started by: python pid: 566 
  mem: 19.1 MiB (0.4%) 
  3: cpu: 1.0% command: packagekitd pid: 763 mem: 10.9 MiB (0.2%) 
  4: cpu: 0.7% command: bash pid: 630 mem: 2.62 MiB (0.0%) 
  5: cpu: 0.6% command: systemd-journald pid: 96 mem: 4.54 MiB (0.1%) 
  Memory top: 5 
  1: mem: 21.4 MiB (0.5%) command: perl pid: 526 cpu: 0.6% 
  2: mem: 19.4 MiB (0.4%) command: php-fpm: pid: 520 cpu: 0.1% 
  3: mem: 19.1 MiB (0.4%) command: track-sensors.py started by: python 
  pid: 566 cpu: 1.0% 
  4: mem: 13.4 MiB (0.3%) command: vncserver-x11-core pid: 528 cpu: 0.1% 
  5: mem: 10.9 MiB (0.2%) command: packagekitd pid: 763 cpu: 1.0% 
Info:
  Processes: 118 Uptime: 1m Init: systemd v: 232 runlevel: 3 
  target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Shell: Storage.sh 
  inxi: 3.0.37

Benchmark #10528 - Brand: Western Digital My Passport SSD