Benchmark #130271 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#36 / 1,698
449
#248 / 1,698
#246 / 988
#5 / 370
16,142
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-01-08 05:11:19
#130,271
24,709
+8,567 (+34.67%)
Ben
Intenso 2,5 SSD SATA III HIGH on Pi 5 using ASM1064 SATA Gen3 (6GBps) to PCI3x1 Gen.3

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
240G
SSD
Intenso
SSD
2.5 inch
SATA
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.1
Raspberry Pi 5 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)

Operating System

Debian GNU/Linux 13 (trixie)
aarch64

Benchmark Results
389 MB/s
503.11 MB/s
338.92 MB/s
63,405 IOPS
65,852 IOPS
253,622 KB/s
263,408 KB/s
88,772 KB/s
84,159 KB/s
41,485 KB/s
83,633 KB/s

inxi Results
System: Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c20e33db-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=CH Console: pty pts/0 Distro: Debian GNU/Linux 13 (trixie) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.1 details: N/A rev: d04171 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.87 GiB used: 452.3 MiB (5.6%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc@107c000000 class-ID: fb Display: server: No display server data found. Headless machine? tty: 80x40 API: N/A Message: No API data available in console. Headless machine? Audio: Message: No device data found. API: ALSA v: k6.12.62+rpt-rpi-2712 status: inactive tools: alsactl,alsamixer,amixer Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: virtual: proto kernel_ll scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: veth143c064 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: vetheed1e7e state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 253.29 GiB used: 11.33 GiB (4.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 vendor: Intenso model: SSD size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 7A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7d 5h cycles: 172 read: 691 KiB written: 7.6 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 223.06 GiB size: 219.64 GiB (98.46%) used: 11.26 GiB (5.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 21724cc6-e5a3-48a1-8643-7917dba3a9fb ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 65.3 MiB (12.8%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: EACA-13DA Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0 Unmounted: ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 29.22 GiB fs: ext4 label: rootfs uuid: 21724cc6-e5a3-48a1-8643-7917dba3a9fb ID-2: /dev/sda1 maj-min: 8:1 size: 512 MiB fs: vfat label: bootfs uuid: EACA-13DA USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: Shenzhen Riitek wireless mini keyboard with touchpad type: keyboard,mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 1997:2433 class-ID: 0301 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 49.7 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 701 libs: 337 tools: apt,apt-get No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.asc] https: //download.docker.com/linux/debian trixie stable Active apt repos in: /etc/apt/sources.list.d/debian.sources 1: deb http: //deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware 2: deb http: //deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.sources 1: deb http: //archive.raspberrypi.com/debian/ trixie main Processes: CPU top: 5 of 215 1: cpu: 1.4% command: bash pid: 5442 mem: 3.27 MiB (0.0%) 2: cpu: 1.0% command: smbd pid: 1549 mem: 15.5 MiB (0.1%) 3: cpu: 0.0% command: init pid: 1 mem: 14.7 MiB (0.1%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [pool_workqueue_release] pid: 3 mem: 0.00 MiB (0.0%) Memory top: 5 of 215 1: mem: 81.4 MiB (1.0%) command: dockerd pid: 912 cpu: 0.0% 2: mem: 66.8 MiB (0.8%) command: /portainer pid: 1186 cpu: 0.0% 3: mem: 49.6 MiB (0.6%) command: containerd pid: 894 cpu: 0.0% 4: mem: 20.0 MiB (0.2%) command: networkmanager pid: 727 cpu: 0.0% 5: mem: 18.1 MiB (0.2%) command: smbd pid: 1320 cpu: 0.0% Info: Processes: 215 Uptime: 1h 18m Init: systemd v: 257 default: multi-user tool: systemctl Compilers: gcc: 14.2.0 alt: 14 Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter
    parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory
    numa_policy=interleave nvme.max_host_mem_size_mb=0 bcm2708_fb.fbwidth=640
    bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 numa=fake=8
    system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1
    root=PARTUUID=c20e33db-02 rootfstype=ext4 fsck.repair=yes rootwait
    cfg80211.ieee80211_regdom=CH
  Console: pty pts/0 Distro: Debian GNU/Linux 13 (trixie)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.1 details: N/A rev: d04171 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.87 GiB used: 452.3 MiB (5.6%) igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB
    L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc@107c000000
    class-ID: fb
  Display: server: No display server data found. Headless machine? tty: 80x40
  API: N/A Message: No API data available in console. Headless machine?
Audio:
  Message: No device data found.
  API: ALSA v: k6.12.62+rpt-rpi-2712 status: inactive tools: alsactl,alsamixer,amixer
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A
    bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  virtual: proto kernel_ll scope: link
  IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  IF-ID-3: veth143c064 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: vetheed1e7e state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 253.29 GiB used: 11.33 GiB (4.5%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size:
    physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 vendor: Intenso model: SSD size: 223.57 GiB block-size:
    physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 7A0
    temp: 40 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 7d 5h cycles: 172 read: 691 KiB written: 7.6 MiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 223.06 GiB size: 219.64 GiB (98.46%) used: 11.26 GiB (5.1%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: 21724cc6-e5a3-48a1-8643-7917dba3a9fb
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 65.3 MiB (12.8%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: EACA-13DA
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd
    avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0
Unmounted:
  ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 29.22 GiB fs: ext4 label: rootfs
    uuid: 21724cc6-e5a3-48a1-8643-7917dba3a9fb
  ID-2: /dev/sda1 maj-min: 8:1 size: 512 MiB fs: vfat label: bootfs uuid: EACA-13DA
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-2:2 info: Shenzhen Riitek wireless mini keyboard with touchpad type: keyboard,mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 100mA chip-ID: 1997:2433 class-ID: 0301
  Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 49.7 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 701 libs: 337 tools: apt,apt-get
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.asc] https: //download.docker.com/linux/debian trixie stable
  Active apt repos in: /etc/apt/sources.list.d/debian.sources
    1: deb http: //deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware
    2: deb http: //deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.sources
    1: deb http: //archive.raspberrypi.com/debian/ trixie main
Processes:
  CPU top: 5 of 215
  1: cpu: 1.4% command: bash pid: 5442 mem: 3.27 MiB (0.0%)
  2: cpu: 1.0% command: smbd pid: 1549 mem: 15.5 MiB (0.1%)
  3: cpu: 0.0% command: init pid: 1 mem: 14.7 MiB (0.1%)
  4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%)
  5: cpu: 0.0% command: [pool_workqueue_release] pid: 3 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 215
  1: mem: 81.4 MiB (1.0%) command: dockerd pid: 912 cpu: 0.0%
  2: mem: 66.8 MiB (0.8%) command: /portainer pid: 1186 cpu: 0.0%
  3: mem: 49.6 MiB (0.6%) command: containerd pid: 894 cpu: 0.0%
  4: mem: 20.0 MiB (0.2%) command: networkmanager pid: 727 cpu: 0.0%
  5: mem: 18.1 MiB (0.2%) command: smbd pid: 1320 cpu: 0.0%
Info:
  Processes: 215 Uptime: 1h 18m Init: systemd v: 257 default: multi-user tool: systemctl Compilers:
  gcc: 14.2.0 alt: 14 Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

Benchmark #130271 - Brand: Intenso SSDSataIII Series