Benchmark #135253 - pibenchmarks.com

Brand: SanDisk Ultra Fit
USB Flash
#15 / 1,702
836
#1,394 / 1,702
#34 / 94
#35 / 89
1,080
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-10-09 13:23:05
#135,253
1,031
-49 (-4.75%)
Anonymous
Sandisk USB3 key on Raspi400

Storage Details
SanDisk Ultra Fit
USB Flash
56.8G
USB Flash
SanDisk
UltraFit
3.20
5,000
0781:5581
0x0781 (SanDisk Corp.)
0x5581
usb-storage
None

System Board Details
		Amazon.com
Raspberry Pi 400 1.0
Raspberry Pi 400 Rev 1.0
Raspberry Pi Foundation
N/A
4
1,800
500
1,600

Operating System

Raspbian GNU/Linux 13 (trixie)
aarch64

Benchmark Results
26.7 MB/s
116.14 MB/s
48.65 MB/s
265 IOPS
2,228 IOPS
1,063 KB/s
8,912 KB/s
19,458 KB/s
2,404 KB/s
8,516 KB/s
903 KB/s

inxi Results
System: Host: raspberrypi-ma Kernel: 6.18.50+rpt-rpi-v8 arch: aarch64 bits: 32 compiler: N/A clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=32 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 numa=fake=2 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=caa1c1e2-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE video=HDMI-A-1:1920x1080M@60 Console: pty pts/0 Distro: Raspbian GNU/Linux 13 (trixie) Machine: Type: ARM System: Raspberry Pi 400 Rev 1.0 details: N/A rev: c03130 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 4 GiB available: 3.71 GiB used: 254.5 MiB (6.7%) igpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: disabled cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1800 min/max: 600/1800 boost: disabled scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: gather_data_sampling status: Not affected Type: ghostwrite status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: old_microcode status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: unspecified server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6 driver: gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: localhost:10.0 Monitor-1: HDMI-A-1 model: EIZO NANAO EV2740X built: 2023 res: 3840x2160 dpi: 163 gamma: 1.2 chroma: red: x: 0.663 y: 0.329 green: x: 0.310 y: 0.651 blue: x: 0.149 y: 0.051 white: x: 0.314 y: 0.329 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1280x800, 1280x720, 1024x768, 800x600, 720x576, 720x480, 640x480, 720x400 EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid: unhandled CEA mode 96 3: parse_edid: unhandled CEA mode 95 API: Vulkan Message: No Vulkan data available. API: OpenGL Message: Unable to show GL data. glxinfo is missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.18.50+rpt-rpi-v8 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2003:d0:2725:5600:6200:a5e7:26ff:e6e8/128 type: dynamic noprefixroute scope: global IP v6: 2003:d0:2725:5600:55e0:135e:7af:abb7/64 type: dynamic noprefixroute scope: global IP v6: fdca:c686:6daa:0:7f94:54c0:3bc3:fe25/64 type: dynamic noprefixroute scope: global IP v6: fe80::6200:a5e7:26ff:e6e8/64 type: noprefixroute scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: end0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 217.224.X.X Bluetooth: Device-1: pl011-axi driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6606 hci-v: 9 rev: 454 class-ID: 400000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: telephony Device-2: pl011-axi driver: ctrl bus-ID: N/A chip-ID: arm:gpiochip0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 57.3 GiB used: 13.15 GiB (23.0%) ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: USB 3.2Gen1 size: 57.3 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A fw-rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 56.79 GiB size: 55.83 GiB (98.30%) used: 13.06 GiB (23.4%) fs: ext4 block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: e059ee8f-6d89-42d3-b97a-bcebd4e02938 ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 96.7 MiB (19.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: 272A-7EC9 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd avail: lzo-rle,lzo,lz4 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: Holtek Raspberry Pi Internal Keyboard type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 04d9:0007 class-ID: 0300 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: SanDisk Ultra type: mass storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0781:5581 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 40.4 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1784 libs: 910 tools: apt,apt-get,aptitude,nala No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/raspbian.sources 1: deb [arch=armhf] http://raspbian.raspberrypi.com/raspbian/ trixie main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.sources 1: deb http://archive.raspberrypi.com/debian/ trixie main Processes: CPU top: 5 of 176 1: cpu: 100% command: ps pid: 6307 mem: 3.15 MiB (0.0%) 2: cpu: 0.3% command: [kworker/u16:2-ext4-rsv-conversion] pid: 3423 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: systemd pid: 4125 mem: 10.2 MiB (0.2%) 4: cpu: 0.3% command: wireplumber pid: 4157 mem: 23.5 MiB (0.6%) 5: cpu: 0.2% command: [irq/40-mmc0] pid: 89 mem: 0.00 MiB (0.0%) Memory top: 5 of 176 1: mem: 23.5 MiB (0.6%) command: wireplumber pid: 4157 cpu: 0.3% 2: mem: 17.4 MiB (0.4%) command: networkmanager pid: 749 cpu: 0.0% 3: mem: 16.9 MiB (0.4%) command: packagekitd pid: 4965 cpu: 0.0% 4: mem: 11.9 MiB (0.3%) command: init pid: 1 cpu: 0.1% 5: mem: 10.2 MiB (0.2%) command: systemd pid: 4125 cpu: 0.3% Info: Processes: 176 Uptime: 2h 36m Init: systemd v: 257 default: multi-user tool: systemctl Compilers: gcc: 14.2.0 alt: 14 clang: 19.1.7 Shell: Bash (sudo) v: 5.2.37 running-in: sshd-session inxi: 3.3.31

inxi Results

System:
  Host: raspberrypi-ma Kernel: 6.18.50+rpt-rpi-v8 arch: aarch64 bits: 32
    compiler: N/A clocksource: arch_sys_counter parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory
    numa_policy=interleave nvme.max_host_mem_size_mb=32
    snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 numa=fake=2
    system_heap.max_order=0 iommu_dma_numa_policy=interleave
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
    vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1
    root=PARTUUID=caa1c1e2-02 rootfstype=ext4 fsck.repair=yes rootwait
    cfg80211.ieee80211_regdom=DE video=HDMI-A-1:1920x1080M@60
  Console: pty pts/0 Distro: Raspbian GNU/Linux 13 (trixie)
Machine:
  Type: ARM System: Raspberry Pi 400 Rev 1.0 details: N/A rev: c03130
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 4 GiB available: 3.71 GiB used: 254.5 MiB (6.7%)
    igpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 0 stepping: 3
  Topology: cpus: 1x cores: 4 smt: disabled cache: L1: 320 KiB
    desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1800 min/max: 600/1800 boost: disabled scaling:
    driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800
    bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: old_microcode status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
    class-ID: gpu
  Display: unspecified server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6
    driver:
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: localhost:10.0
  Monitor-1: HDMI-A-1 model: EIZO NANAO EV2740X built: 2023
    res: 3840x2160 dpi: 163 gamma: 1.2 chroma: red: x: 0.663 y: 0.329 green:
    x: 0.310 y: 0.651 blue: x: 0.149 y: 0.051 white: x: 0.314 y: 0.329
    size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9
    modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1280x800, 1280x720,
    1024x768, 800x600, 720x576, 720x480, 640x480, 720x400
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid:
    unhandled CEA mode 96 3: parse_edid: unhandled CEA mode 95
  API: Vulkan Message: No Vulkan data available.
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.18.50+rpt-rpi-v8 status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    tools: pw-cat,pw-cli,wpctl
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fe300000 class-ID: mmcnr
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: 2003:d0:2725:5600:6200:a5e7:26ff:e6e8/128
    type: dynamic noprefixroute scope: global
  IP v6: 2003:d0:2725:5600:55e0:135e:7af:abb7/64 type: dynamic noprefixroute
    scope: global
  IP v6: fdca:c686:6daa:0:7f94:54c0:3bc3:fe25/64 type: dynamic noprefixroute
    scope: global
  IP v6: fe80::6200:a5e7:26ff:e6e8/64 type: noprefixroute scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: end0 state: down mac: XX:XX:XX:XX:XX:XX
  WAN IP: 217.224.X.X
Bluetooth:
  Device-1: pl011-axi driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000
    class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX
    bt-v: 5.0 lmp-v: 9 sub-v: 6606 hci-v: 9 rev: 454 class-ID: 400000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: peripheral accept service-classes: telephony
  Device-2: pl011-axi driver: ctrl bus-ID: N/A chip-ID: arm:gpiochip0
    class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 57.3 GiB used: 13.15 GiB (23.0%)
  ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: USB 3.2Gen1
    size: 57.3 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2
    spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A
        fw-rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 56.79 GiB size: 55.83 GiB (98.30%) used: 13.06 GiB (23.4%)
    fs: ext4 block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: e059ee8f-6d89-42d3-b97a-bcebd4e02938
  ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%)
    used: 96.7 MiB (19.2%) fs: vfat block-size: 512 B dev: /dev/sda1
    maj-min: 8:1 label: bootfs uuid: 272A-7EC9
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo-rle,lzo,lz4 dev: /dev/zram0
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.4:3 info: Holtek Raspberry Pi Internal Keyboard
    type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 04d9:0007 class-ID: 0300
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: SanDisk Ultra type: mass storage driver: usb-storage
    interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 power: 896mA chip-ID: 0781:5581 class-ID: 0806
    Sensors:
  Src: /sys System Temperatures: cpu: 40.4 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1784 libs: 910 tools: apt,apt-get,aptitude,nala
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/raspbian.sources
    1: deb [arch=armhf] http://raspbian.raspberrypi.com/raspbian/ trixie main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.sources
    1: deb http://archive.raspberrypi.com/debian/ trixie main
Processes:
  CPU top: 5 of 176
  1: cpu: 100% command: ps pid: 6307 mem: 3.15 MiB (0.0%)
  2: cpu: 0.3% command: [kworker/u16:2-ext4-rsv-conversion] pid: 3423
    mem: 0.00 MiB (0.0%)
  3: cpu: 0.3% command: systemd pid: 4125 mem: 10.2 MiB (0.2%)
  4: cpu: 0.3% command: wireplumber pid: 4157 mem: 23.5 MiB (0.6%)
  5: cpu: 0.2% command: [irq/40-mmc0] pid: 89 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 176
  1: mem: 23.5 MiB (0.6%) command: wireplumber pid: 4157 cpu: 0.3%
  2: mem: 17.4 MiB (0.4%) command: networkmanager pid: 749 cpu: 0.0%
  3: mem: 16.9 MiB (0.4%) command: packagekitd pid: 4965 cpu: 0.0%
  4: mem: 11.9 MiB (0.3%) command: init pid: 1 cpu: 0.1%
  5: mem: 10.2 MiB (0.2%) command: systemd pid: 4125 cpu: 0.3%
Info:
  Processes: 176 Uptime: 2h 36m Init: systemd v: 257 default: multi-user
  tool: systemctl Compilers: gcc: 14.2.0 alt: 14 clang: 19.1.7
  Shell: Bash (sudo) v: 5.2.37 running-in: sshd-session inxi: 3.3.31

Benchmark #135253 - Brand: SanDisk Ultra Fit