Benchmark #13789 - pibenchmarks.com

Brand: Transcend MTS Series
SSD (M.2 SATA)
#67 / 1,679
286
#328 / 1,679
#319 / 984
#16 / 115
8,704
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-26 14:12:56
#13,789
10,330
+1,626 (+15.74%)
Anonymous
M2 SSD

Storage Details
Transcend MTS Series
SSD (M.2 SATA)
120G
SSD
Transcend
TS120GMTS420S
M.2
SATA
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
2,147 (+647)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
236 MB/s
331.05 MB/s
303.21 MB/s
11,525 IOPS
30,117 IOPS
46,100 KB/s
120,470 KB/s
39,893 KB/s
31,441 KB/s
22,609 KB/s
39,385 KB/s

inxi Results
System: Kernel: 4.19.106-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e484eb16-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 879.8 MiB (22.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1652 Speed: 2295 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 2295 2: 2295 3: 2295 4: 2295 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 159x42 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.106-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 141.51 GiB used: 7.34 GiB (5.2%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Transcend drive model: TS120GMTS420S size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0209 drive rev: S0807A0 temp: 52 C scheme: MBR SMART: yes state: enabled health: PASSED on: 24d 15h cycles: 17 read: 1.2 MiB written: 7.6 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 7.29 GiB (6.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: SDD-RPI-120 uuid: 81c04e5d-6e00-4092-b6ce-ea820125b79d ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: FE9F-3627 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb https: //download.webmin.com/download/repository sarge contrib Active apt repos in: /etc/apt/sources.list.d/mssql-release.list 1: deb [arch=amd64,arm64,armhf] https: //packages.microsoft.com/debian/10/prod buster main No active apt repos in: /etc/apt/sources.list.d/php.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 94.0% command: cron.php started by: php7.3 pid: 27317 mem: 22.2 MiB (0.5%) 2: cpu: 91.0% command: magento started by: php7.3 pid: 27315 mem: 68.6 MiB (1.7%) 3: cpu: 91.0% command: magento started by: php7.3 pid: 27318 mem: 68.9 MiB (1.7%) 4: cpu: 30.0% command: stats.cgi pid: 27257 mem: 25.5 MiB (0.6%) 5: cpu: 2.0% command: [/usr/share/webm] pid: 27291 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 105.0 MiB (2.6%) command: mysqld pid: 674 cpu: 0.9% 2: mem: 94.9 MiB (2.4%) command: redis-server pid: 648 cpu: 0.3% 3: mem: 82.3 MiB (2.1%) command: magento started by: php7.3 pid: 1343 cpu: 0.1% 4: mem: 82.3 MiB (2.1%) command: magento started by: php7.3 pid: 1339 cpu: 0.1% 5: mem: 82.1 MiB (2.1%) command: magento started by: php7.3 pid: 1337 cpu: 0.1% Info: Processes: 166 Uptime: 4h 40m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.106-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e484eb16-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 879.8 MiB (22.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1652 
           Speed: 2295 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 2295 2: 2295 3: 2295 
           4: 2295 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 159x42 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.106-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 141.51 GiB used: 7.34 GiB (5.2%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Transcend 
           drive model: TS120GMTS420S size: 111.79 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.2 speed: 6.0 Gb/s rev: 0209 
           drive rev: S0807A0 temp: 52 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 24d 15h cycles: 17 read: 1.2 MiB 
           written: 7.6 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 7.29 GiB (6.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: SDD-RPI-120 
           uuid: 81c04e5d-6e00-4092-b6ce-ea820125b79d 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: FE9F-3627 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb https: //download.webmin.com/download/repository sarge contrib
           Active apt repos in: /etc/apt/sources.list.d/mssql-release.list 
           1: deb [arch=amd64,arm64,armhf] https: //packages.microsoft.com/debian/10/prod buster main
           No active apt repos in: /etc/apt/sources.list.d/php.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 94.0% command: cron.php started by: php7.3 pid: 27317 mem: 22.2 MiB (0.5%) 
           2: cpu: 91.0% command: magento started by: php7.3 pid: 27315 mem: 68.6 MiB (1.7%) 
           3: cpu: 91.0% command: magento started by: php7.3 pid: 27318 mem: 68.9 MiB (1.7%) 
           4: cpu: 30.0% command: stats.cgi pid: 27257 mem: 25.5 MiB (0.6%) 
           5: cpu: 2.0% command: [/usr/share/webm] pid: 27291 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 105.0 MiB (2.6%) command: mysqld pid: 674 cpu: 0.9% 
           2: mem: 94.9 MiB (2.4%) command: redis-server pid: 648 cpu: 0.3% 
           3: mem: 82.3 MiB (2.1%) command: magento started by: php7.3 pid: 1343 cpu: 0.1% 
           4: mem: 82.3 MiB (2.1%) command: magento started by: php7.3 pid: 1339 cpu: 0.1% 
           5: mem: 82.1 MiB (2.1%) command: magento started by: php7.3 pid: 1337 cpu: 0.1% 
Info:      Processes: 166 Uptime: 4h 40m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13789 - Brand: Transcend MTS Series