Benchmark #14304 - pibenchmarks.com

Brand: SanDisk Extreme Portable
SSD (Portable)
#67 / 1,701
303
#441 / 1,701
#425 / 990
#58 / 145
7,531
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-30 13:45:00
#14,304
8,176
+645 (+7.89%)
s.schr
Sandisk Extreme 250GB

Storage Details
SanDisk Extreme Portable
SSD (Portable)
250G
SSD
SanDisk
SD9SN8W256G
M.2
SATA
3.00
5,000
1d6b:558c
0x1d6b (Linux Foundation)
0x558c
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
176 MB/s
306.16 MB/s
271.36 MB/s
8,473 IOPS
21,787 IOPS
33,893 KB/s
87,148 KB/s
32,481 KB/s
27,152 KB/s
21,548 KB/s
31,973 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=527f5c98-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 502.1 MiB (12.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1920x1080~60Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-632a14e29284 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: eth0 state: down mac: IF-ID-4: veth2c0ed34 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth47cb661 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth5d22c50 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth9ce1577 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethe483144 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 262.61 GiB used: 16.28 GiB (6.2%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SD9SN8W256G size: 232.89 GiB block size: physical: 4096 B logical: 512 B rev: 1012 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.63 GiB size: 227.98 GiB (98.00%) used: 5.41 GiB (2.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.96 GiB (98.26%) used: 5.36 GiB (18.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-5: /var/lib/docker/overlay2/03415a32d315c69ea7dfa16dd0ffb196231b6d3833ce4058b876b95f64e9064a/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/3390da9010564da5197db90448847e5bebc21a23cb5601821b630a0c5b30256f/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/930cbc63b29549f7754780765044bf4db80706586b1f2818c51cafdfaba49477/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/a4b12c50e5c8bbc2c16a630ce9ec4faee53f57d10ae0655d355fbf31fe5e303f/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/cd5cd30ee1384e52a97ed46047f8cdbd2efd6ec33c1a825c7fa30e5e85702ccb/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Microsoft Nano Transceiver v1.0 for Bluetooth type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:0745 Device-2: 1-1.4:4 info: Cherry Keyboard type: Keyboard,HID driver: cherry,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046a:0023 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0781:558c Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.1% command: influxd pid: 1769 mem: 37.7 MiB (0.9%) 2: cpu: 4.4% command: xorg pid: 502 mem: 46.9 MiB (1.1%) 3: cpu: 3.6% command: node-red pid: 2160 mem: 67.0 MiB (1.7%) 4: cpu: 2.5% command: init pid: 1 mem: 7.98 MiB (0.2%) 5: cpu: 1.9% command: dockerd pid: 461 mem: 63.1 MiB (1.6%) Memory top: 5 1: mem: 67.0 MiB (1.7%) command: node-red pid: 2160 cpu: 3.6% 2: mem: 63.1 MiB (1.6%) command: dockerd pid: 461 cpu: 1.9% 3: mem: 48.1 MiB (1.2%) command: x-terminal-emulator pid: 2185 cpu: 0.9% 4: mem: 46.9 MiB (1.1%) command: xorg pid: 502 cpu: 4.4% 5: mem: 37.7 MiB (0.9%) command: influxd pid: 1769 cpu: 12.1% Info: Processes: 179 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=527f5c98-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 502.1 MiB (12.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 1920x1080~60Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-632a14e29284 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: eth0 state: down mac:  
           IF-ID-4: veth2c0ed34 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth47cb661 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth5d22c50 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth9ce1577 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethe483144 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 262.61 GiB used: 16.28 GiB (6.2%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SD9SN8W256G size: 232.89 GiB 
           block size: physical: 4096 B logical: 512 B rev: 1012 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.63 GiB size: 227.98 GiB (98.00%) used: 5.41 GiB (2.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot 
           uuid: 6341-C9E5 
           ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.96 GiB (98.26%) 
           used: 5.36 GiB (18.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-5: /var/lib/docker/overlay2/03415a32d315c69ea7dfa16dd0ffb196231b6d3833ce4058b876b95f64e9064a/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/3390da9010564da5197db90448847e5bebc21a23cb5601821b630a0c5b30256f/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/930cbc63b29549f7754780765044bf4db80706586b1f2818c51cafdfaba49477/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/a4b12c50e5c8bbc2c16a630ce9ec4faee53f57d10ae0655d355fbf31fe5e303f/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/cd5cd30ee1384e52a97ed46047f8cdbd2efd6ec33c1a825c7fa30e5e85702ccb/merged raw size: N/A size: 227.98 GiB used: 5.41 GiB (2.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Microsoft Nano Transceiver v1.0 for Bluetooth 
           type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 
           speed: 12 Mb/s chip ID: 045e:0745 
           Device-2: 1-1.4:4 info: Cherry Keyboard type: Keyboard,HID driver: cherry,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046a:0023 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 0781:558c Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.1% command: influxd pid: 1769 mem: 37.7 MiB (0.9%) 
           2: cpu: 4.4% command: xorg pid: 502 mem: 46.9 MiB (1.1%) 
           3: cpu: 3.6% command: node-red pid: 2160 mem: 67.0 MiB (1.7%) 
           4: cpu: 2.5% command: init pid: 1 mem: 7.98 MiB (0.2%) 
           5: cpu: 1.9% command: dockerd pid: 461 mem: 63.1 MiB (1.6%) 
           Memory top: 5 
           1: mem: 67.0 MiB (1.7%) command: node-red pid: 2160 cpu: 3.6% 
           2: mem: 63.1 MiB (1.6%) command: dockerd pid: 461 cpu: 1.9% 
           3: mem: 48.1 MiB (1.2%) command: x-terminal-emulator pid: 2185 cpu: 0.9% 
           4: mem: 46.9 MiB (1.1%) command: xorg pid: 502 cpu: 4.4% 
           5: mem: 37.7 MiB (0.9%) command: influxd pid: 1769 cpu: 12.1% 
Info:      Processes: 179 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14304 - Brand: SanDisk Extreme Portable