Benchmark #14816 - pibenchmarks.com

Brand: PNY CS900
SSD (2.5" SATA)
#55 / 1,675
301
#716 / 1,675
#692 / 984
#203 / 370
5,891
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-05 02:14:39
#14,816
2,889
-3,002 (-103.91%)
Anonymous
PNY 120 GB SSD on JMicron Technology Corp. / JMicron USA Technology Corp. JMS567 SATA 6Gb/s bridge

Storage Details
PNY CS900
SSD (2.5" SATA)
120G
SSD
PNY
CS900120GBSSD
2.5 inch
SATA
2.00
480
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
33.1 MB/s
27.82 MB/s
28.7 MB/s
3,703 IOPS
2,603 IOPS
14,813 KB/s
10,415 KB/s
13,370 KB/s
12,784 KB/s
12,217 KB/s
13,266 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1366 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a52082 Memory: RAM: total: 1002.1 MiB used: 240.5 MiB (24.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 179x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 111.79 GiB used: 5.80 GiB (5.2%) ID-1: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: PNY drive model: CS900 120GB SSD size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 3202 drive rev: CS900613 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 6 hrs cycles: 22 written: 16 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 5.74 GiB (5.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.2 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: digital-X type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0513:0318 Device-3: 1-1.4:5 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 8.3% command: [kworker/2:2-mm_percpu_wq] pid: 63 mem: 0.00 MiB (0.0%) 2: cpu: 4.0% command: init pid: 1 mem: 8.07 MiB (0.8%) 3: cpu: 1.0% command: smartd pid: 1365 mem: 3.16 MiB (0.3%) 4: cpu: 0.9% command: lxpanel pid: 680 mem: 28.3 MiB (3.0%) 5: cpu: 0.9% command: pcmanfm pid: 681 mem: 25.4 MiB (2.7%) Memory top: 5 1: mem: 47.7 MiB (5.1%) command: xorg pid: 540 cpu: 0.6% 2: mem: 28.3 MiB (3.0%) command: lxpanel pid: 680 cpu: 0.9% 3: mem: 25.4 MiB (2.7%) command: pcmanfm pid: 681 cpu: 0.9% 4: mem: 13.9 MiB (1.4%) command: vncserverui pid: 745 cpu: 0.1% 5: mem: 13.8 MiB (1.4%) command: vncserver-x11-core pid: 532 cpu: 0.1% Info: Processes: 160 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1366 
           bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a52082 
           Memory:    RAM: total: 1002.1 MiB used: 240.5 MiB (24.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 179x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 5.80 GiB (5.2%) 
           ID-1: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: PNY 
           drive model: CS900 120GB SSD size: 111.79 GiB block size: physical: 512 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 3202 drive rev: CS900613 temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 6 hrs cycles: 22 written: 16 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 5.74 GiB (5.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.2 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: digital-X type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0513:0318 
           Device-3: 1-1.4:5 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 8.3% command: [kworker/2:2-mm_percpu_wq] pid: 63 mem: 0.00 MiB (0.0%) 
           2: cpu: 4.0% command: init pid: 1 mem: 8.07 MiB (0.8%) 
           3: cpu: 1.0% command: smartd pid: 1365 mem: 3.16 MiB (0.3%) 
           4: cpu: 0.9% command: lxpanel pid: 680 mem: 28.3 MiB (3.0%) 
           5: cpu: 0.9% command: pcmanfm pid: 681 mem: 25.4 MiB (2.7%) 
           Memory top: 5 
           1: mem: 47.7 MiB (5.1%) command: xorg pid: 540 cpu: 0.6% 
           2: mem: 28.3 MiB (3.0%) command: lxpanel pid: 680 cpu: 0.9% 
           3: mem: 25.4 MiB (2.7%) command: pcmanfm pid: 681 cpu: 0.9% 
           4: mem: 13.9 MiB (1.4%) command: vncserverui pid: 745 cpu: 0.1% 
           5: mem: 13.8 MiB (1.4%) command: vncserver-x11-core pid: 532 cpu: 0.1% 
Info:      Processes: 160 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14816 - Brand: PNY CS900