Benchmark #14918 - pibenchmarks.com

Brand: Seagate Barracuda
HDD (3.5" SATA)
#184 / 1,679
94
#1,256 / 1,679
#51 / 69
#20 / 30
1,307
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-05 16:22:07
#14,918
1,146
-161 (-14.05%)
Anonymous
WD500

Storage Details
Seagate Barracuda
HDD (3.5" SATA)
HDD
Seagate
ST9500420AS
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
65.7 MB/s
266 IOPS
175 IOPS
1,065 KB/s
702 KB/s
16,309 KB/s
15,585 KB/s
675 KB/s
1,016 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1600x1200M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=UUID=0ce8848a-41fb-40bb-9b66-94d499c68b36 Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 530.7 MiB (13.7%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1600x1200~60Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 487.75 GiB used: 258.4 MiB (0.1%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Fit size: 14.59 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb type: USB vendor: Seagate model: ST950042 0AS drive model: ST9500420AS family: Momentus 7200.4 size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 7200 rpm rev: 0117 drive rev: 0002SDM1 temp: 39 C scheme: MBR SMART: yes state: enabled health: PASSED on: 116d 8h cycles: 3883 read: 540.96 GiB written: 170.07 GiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 7.40 GiB size: 7.39 GiB (99.95%) used: 73.1 MiB (1.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 659D-03B7 ID-2: /media/pi/9A6D-5C8E raw size: 14.59 GiB size: 14.58 GiB (99.95%) used: 185.3 MiB (1.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 9A6D-5C8E Unmounted: ID-1: /dev/sdb1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sdb2 size: 465.64 GiB fs: ext4 label: berryboot uuid: 0ce8848a-41fb-40bb-9b66-94d499c68b36 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: SanDisk Cruzer Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5571 Device-2: 1-1.4:4 info: Logitech MK260 Wireless Combo Receiver type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52e Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0567 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.3% command: xorg pid: 554 mem: 46.6 MiB (1.2%) 2: cpu: 1.4% command: lib/systemd/systemd pid: 1 mem: 8.30 MiB (0.2%) 3: cpu: 1.2% command: lxterminal pid: 2075 mem: 26.5 MiB (0.7%) 4: cpu: 0.6% command: lxpanel pid: 696 mem: 27.8 MiB (0.7%) 5: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 229 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 46.6 MiB (1.2%) command: xorg pid: 554 cpu: 3.3% 2: mem: 27.8 MiB (0.7%) command: lxpanel pid: 696 cpu: 0.6% 3: mem: 26.5 MiB (0.7%) command: lxterminal pid: 2075 cpu: 1.2% 4: mem: 19.7 MiB (0.5%) command: pcmanfm pid: 697 cpu: 0.3% 5: mem: 13.7 MiB (0.3%) command: openbox pid: 684 cpu: 0.1% Info: Processes: 154 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1600x1200M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 
           datadev=UUID=0ce8848a-41fb-40bb-9b66-94d499c68b36 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 530.7 MiB (13.7%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 1600x1200~60Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 487.75 GiB used: 258.4 MiB (0.1%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Fit size: 14.59 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb type: USB vendor: Seagate model: ST950042 0AS drive model: ST9500420AS 
           family: Momentus 7200.4 size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
           sata: 2.6 speed: 3.0 Gb/s rotation: 7200 rpm rev: 0117 drive rev: 0002SDM1 temp: 39 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 116d 8h cycles: 3883 read: 540.96 GiB 
           written: 170.07 GiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 
           threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 7.40 GiB size: 7.39 GiB (99.95%) used: 73.1 MiB (1.0%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 659D-03B7 
           ID-2: /media/pi/9A6D-5C8E raw size: 14.59 GiB size: 14.58 GiB (99.95%) 
           used: 185.3 MiB (1.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A 
           uuid: 9A6D-5C8E 
Unmounted: ID-1: /dev/sdb1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sdb2 size: 465.64 GiB fs: ext4 label: berryboot 
           uuid: 0ce8848a-41fb-40bb-9b66-94d499c68b36 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: SanDisk Cruzer Fit type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5571 Device-2: 1-1.4:4 info: Logitech MK260 Wireless Combo Receiver type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52e 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0567 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.3% command: xorg pid: 554 mem: 46.6 MiB (1.2%) 
           2: cpu: 1.4% command: lib/systemd/systemd pid: 1 mem: 8.30 MiB (0.2%) 
           3: cpu: 1.2% command: lxterminal pid: 2075 mem: 26.5 MiB (0.7%) 
           4: cpu: 0.6% command: lxpanel pid: 696 mem: 27.8 MiB (0.7%) 
           5: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 229 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 46.6 MiB (1.2%) command: xorg pid: 554 cpu: 3.3% 
           2: mem: 27.8 MiB (0.7%) command: lxpanel pid: 696 cpu: 0.6% 
           3: mem: 26.5 MiB (0.7%) command: lxterminal pid: 2075 cpu: 1.2% 
           4: mem: 19.7 MiB (0.5%) command: pcmanfm pid: 697 cpu: 0.3% 
           5: mem: 13.7 MiB (0.3%) command: openbox pid: 684 cpu: 0.1% 
Info:      Processes: 154 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14918 - Brand: Seagate Barracuda