Benchmark #15454 - pibenchmarks.com

Brand: FNK Tech USB SD Card Reader
USB Flash
#81 / 1,539
128
#1,258 / 1,539
#36 / 90
#38 / 86
1,024
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-08 05:53:21
#15,454
5,609
+4,585 (+81.74%)
Anonymous

Storage Details
FNK Tech USB SD Card Reader
USB Flash
59.7G
USB Flash
FNK
GenericSTORAGEDEVICE
05e3:0751
0x05e3
0x0751
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
23 MB/s
30.22 MB/s
30.03 MB/s
1,683 IOPS
13,376 IOPS
6,735 KB/s
53,507 KB/s
65,201 KB/s
16,673 KB/s
65,554 KB/s
12,300 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1561:u console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 741.7 MiB (18.6%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1280x1024~60Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2001:8a0:de4d:f400:88ea:7b45:1a3c:48e5/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::f6a5:482:dd67:f560/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 1.08 TiB used: 668.10 GiB (60.2%) ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Samsung drive model: SSD 860 QVO 1TB size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s drive rev: 0204 drive rev: RVQ01B6Q temp: 27 C scheme: GPT SMART: yes state: enabled health: PASSED on: 96d 13h cycles: 74 written: 704.38 GiB ID-3: /dev/sdb type: USB vendor: Generic model: STORAGE size: 59.69 GiB block size: physical: 512 B logical: 512 B rev: 1404 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 116.41 GiB size: 114.46 GiB (98.32%) used: 54.16 GiB (47.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: bfccd37e-6d58-4506-8c7c-079049369062 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 371E-5F6E ID-3: /disks/SSD raw size: 931.51 GiB size: 915.89 GiB (98.32%) used: 613.73 GiB (67.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 3fb9e4e7-38ba-4011-a2e6-9f910d1435f8 ID-4: /media/pi/USB_64 raw size: 59.67 GiB size: 59.67 GiB (100.00%) used: 166.9 MiB (0.3%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: USB_64 uuid: 6E903B1D903AEB6B Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: 85A1-0804 ID-2: /dev/mmcblk0p2 size: 0 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 094b9e1d-e68b-4151-ae6a-b6469ad6e9fa USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:6 info: Genesys Logic microSD Card Reader type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0751 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https://downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http://giteduberger.fr rpimonitor/ Active apt repos in: /etc/apt/sources.list.d/webmin.list 1: deb https://download.webmin.com/download/repository sarge contrib Processes: CPU top: 5 1: cpu: 7.9% command: iozone pid: 18171 mem: 17.4 MiB (0.4%) 2: cpu: 3.5% command: sto.sh started by: geany pid: 17551 mem: 34.3 MiB (0.9%) 3: cpu: 1.4% command: plex pid: 599 mem: 69.3 MiB (1.8%) 4: cpu: 1.0% command: lxterminal pid: 17632 mem: 26.3 MiB (0.7%) 5: cpu: 0.6% command: transmission-gtk pid: 933 mem: 68.0 MiB (1.8%) Memory top: 5 1: mem: 69.3 MiB (1.8%) command: plex pid: 599 cpu: 1.4% 2: mem: 68.0 MiB (1.8%) command: transmission-gtk pid: 933 cpu: 0.6% 3: mem: 56.3 MiB (1.5%) command: xorg pid: 663 cpu: 0.5% 4: mem: 41.7 MiB (1.1%) command: klauncher pid: 11952 cpu: 0.0% 5: mem: 34.3 MiB (0.9%) command: sto.sh started by: geany pid: 17551 cpu: 3.5% Info: Processes: 341 Uptime: 16h 46m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: bash (sudo) v: 5.0.3 running in: lxterminal inxi: 3.0.38

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
  video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1561:u 
  console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 
  elevator=deadline fsck.repair=yes rootwait 
  Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
  Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 
  rev: c03111 
Memory:
  RAM: total: 3.89 GiB used: 741.7 MiB (18.6%) gpu: 256.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 540 
  Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 
  3: 750 4: 750 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev 
  compositor: xcompmgr resolution: 1280x1024~60Hz 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.97-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: 2001:8a0:de4d:f400:88ea:7b45:1a3c:48e5/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: fe80::f6a5:482:dd67:f560/64 scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:
  Local Storage: total: 1.08 TiB used: 668.10 GiB (60.2%) 
  ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT 
  drive vendor: Samsung drive model: SSD 860 QVO 1TB size: 931.51 GiB 
  block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
  drive rev: 0204 
  drive rev: RVQ01B6Q temp: 27 C scheme: GPT 
  SMART: yes state: enabled health: PASSED on: 96d 13h cycles: 74 
  written: 704.38 GiB 
  ID-3: /dev/sdb type: USB vendor: Generic model: STORAGE size: 59.69 GiB 
  block size: physical: 512 B logical: 512 B rev: 1404 
  scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 116.41 GiB size: 114.46 GiB (98.32%) 
  used: 54.16 GiB (47.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 
  label: root uuid: bfccd37e-6d58-4506-8c7c-079049369062 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 
  label: boot uuid: 371E-5F6E 
  ID-3: /disks/SSD raw size: 931.51 GiB size: 915.89 GiB (98.32%) 
  used: 613.73 GiB (67.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 
  label: N/A uuid: 3fb9e4e7-38ba-4011-a2e6-9f910d1435f8 
  ID-4: /media/pi/USB_64 raw size: 59.67 GiB size: 59.67 GiB (100.00%) 
  used: 166.9 MiB (0.3%) fs: ntfs block size: 4096 B dev: /dev/sdb1 
  label: USB_64 uuid: 6E903B1D903AEB6B 
Unmounted:
  ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY 
  uuid: 85A1-0804 
  ID-2: /dev/mmcblk0p2 size: 0 KiB fs: N/A label: N/A uuid: N/A 
  ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
  uuid: 094b9e1d-e68b-4151-ae6a-b6469ad6e9fa 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.3:6 info: Genesys Logic microSD Card Reader 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 05e3:0751 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-2: 2-2:2 
  info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
  speed: 5 Gb/s chip ID: 152d:1561 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
  1: deb https://downloads.plex.tv/repo/deb public main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
  Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
  1: deb http://giteduberger.fr rpimonitor/
  Active apt repos in: /etc/apt/sources.list.d/webmin.list 
  1: deb https://download.webmin.com/download/repository sarge contrib
Processes:
  CPU top: 5 
  1: cpu: 7.9% command: iozone pid: 18171 mem: 17.4 MiB (0.4%) 
  2: cpu: 3.5% command: sto.sh started by: geany pid: 17551 
  mem: 34.3 MiB (0.9%) 
  3: cpu: 1.4% command: plex pid: 599 mem: 69.3 MiB (1.8%) 
  4: cpu: 1.0% command: lxterminal pid: 17632 mem: 26.3 MiB (0.7%) 
  5: cpu: 0.6% command: transmission-gtk pid: 933 mem: 68.0 MiB (1.8%) 
  Memory top: 5 
  1: mem: 69.3 MiB (1.8%) command: plex pid: 599 cpu: 1.4% 
  2: mem: 68.0 MiB (1.8%) command: transmission-gtk pid: 933 cpu: 0.6% 
  3: mem: 56.3 MiB (1.5%) command: xorg pid: 663 cpu: 0.5% 
  4: mem: 41.7 MiB (1.1%) command: klauncher pid: 11952 cpu: 0.0% 
  5: mem: 34.3 MiB (0.9%) command: sto.sh started by: geany pid: 17551 
  cpu: 3.5% 
Info:
  Processes: 341 Uptime: 16h 46m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: bash (sudo) 
  v: 5.0.3 running in: lxterminal inxi: 3.0.38

Benchmark #15454 - Brand: FNK Tech USB SD Card Reader