Benchmark #16945 - pibenchmarks.com

Brand: PNY CS900
SSD (2.5" SATA)
#35 / 1,539
294
#583 / 1,539
#561 / 875
#177 / 363
5,857
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-11 19:35:26
#16,945
5,997
+140 (+2.33%)
Anonymous
PNY CS900 SsD on Pi 4

Storage Details
PNY CS900
SSD (2.5" SATA)
120G
SSD
PNY
CS900120GBSSD
2.5 inch
SATA
3.00
5,000
1d6b:1561
0x1d6b (Linux Foundation)
0x1561
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
180 MB/s
163.52 MB/s
162.76 MB/s
6,209 IOPS
4,677 IOPS
24,839 KB/s
18,711 KB/s
24,003 KB/s
18,591 KB/s
18,305 KB/s
21,886 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:1561:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 144.8 MiB (3.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 122x31 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 141.51 GiB used: 1.45 GiB (1.0%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: PNY drive model: CS900 120GB SSD size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: CS900613 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 40 written: 6 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 1.40 GiB (1.3%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 27937b4e-eaea-4b6f-8388-ef5e50761afc ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.7% command: init pid: 1 mem: 7.98 MiB (0.2%) 2: cpu: 0.8% command: smartd pid: 1094 mem: 3.12 MiB (0.0%) 3: cpu: 0.3% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: systemd-journald pid: 102 mem: 6.94 MiB (0.1%) 5: cpu: 0.2% command: systemd-udevd pid: 141 mem: 3.74 MiB (0.0%) Memory top: 5 1: mem: 7.98 MiB (0.2%) command: init pid: 1 cpu: 1.7% 2: mem: 6.94 MiB (0.1%) command: systemd-journald pid: 102 cpu: 0.2% 3: mem: 6.64 MiB (0.1%) command: systemd pid: 542 cpu: 0.0% 4: mem: 6.10 MiB (0.1%) command: sshd: pid: 535 cpu: 0.0% 5: mem: 5.46 MiB (0.1%) command: systemd-logind pid: 313 cpu: 0.1% Info: Processes: 129 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:1561:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-01 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 144.8 MiB (3.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 122x31 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 141.51 GiB used: 1.45 GiB (1.0%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: PNY 
           drive model: CS900 120GB SSD size: 111.79 GiB block size: physical: 512 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: CS900613 temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 40 written: 6 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 1.40 GiB (1.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 27937b4e-eaea-4b6f-8388-ef5e50761afc 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 152d:1561 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.7% command: init pid: 1 mem: 7.98 MiB (0.2%) 
           2: cpu: 0.8% command: smartd pid: 1094 mem: 3.12 MiB (0.0%) 
           3: cpu: 0.3% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: systemd-journald pid: 102 mem: 6.94 MiB (0.1%) 
           5: cpu: 0.2% command: systemd-udevd pid: 141 mem: 3.74 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.98 MiB (0.2%) command: init pid: 1 cpu: 1.7% 
           2: mem: 6.94 MiB (0.1%) command: systemd-journald pid: 102 cpu: 0.2% 
           3: mem: 6.64 MiB (0.1%) command: systemd pid: 542 cpu: 0.0% 
           4: mem: 6.10 MiB (0.1%) command: sshd: pid: 535 cpu: 0.0% 
           5: mem: 5.46 MiB (0.1%) command: systemd-logind pid: 313 cpu: 0.1% 
Info:      Processes: 129 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #16945 - Brand: PNY CS900