Benchmark #18704 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#36 / 1,700
456
#250 / 1,700
#248 / 989
#5 / 370
16,183
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-17 05:55:15
#18,704
4,918
-11,265 (-229.06%)
Anonymous

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
120G
SSD
Intenso
SATAIIISSD
2.5 inch
SATA
3.00
5,000
1f75:0611
0x1f75 (Innostor Technology Corporation)
0x0611 (AlDiga AL-11U Quad-band GSM/GPRS/EDGE modem)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
106 MB/s
157.48 MB/s
153.2 MB/s
5,116 IOPS
4,104 IOPS
20,464 KB/s
16,416 KB/s
21,669 KB/s
18,835 KB/s
15,534 KB/s
21,305 KB/s

inxi Results
System: Kernel: 4.19.105-v8-28 aarch64 bits: 64 compiler: gcc v: 9.2.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 fsck.repair=yes fsck.mode=auto root=/dev/sda2 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 300.7 MiB (7.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 178x59 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.105-v8-28 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: noprefixroute scope: global IP v6: type: mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 119.11 GiB used: 2.43 GiB (2.0%) ID-1: /dev/mmcblk0 model: 00000 size: 7.32 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intenso model: SATA III SSD size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: SBFM11.2 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 170d 7h cycles: 79 written: 2.7 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.41%) used: 2.39 GiB (2.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 40.7 MiB (16.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: system-boot uuid: 85F3-CC2B Unmounted: ID-1: /dev/mmcblk0p2 size: 7.07 GiB fs: ext4 label: writable uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: system-boot uuid: 85F3-CC2B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: GreenAsia USB to PS/2 Adapter type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:0020 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1f75:0611 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main Processes: CPU top: 5 1: cpu: 0.5% command: init pid: 1 mem: 8.07 MiB (0.2%) 2: cpu: 0.2% command: [usb-storage] pid: 111 mem: 0.00 MiB (0.0%) 3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 18.9 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 600 cpu: 0.0% 2: mem: 16.4 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 546 cpu: 0.0% 3: mem: 8.24 MiB (0.2%) command: systemd-journald pid: 170 cpu: 0.0% 4: mem: 8.07 MiB (0.2%) command: init pid: 1 cpu: 0.5% 5: mem: 6.64 MiB (0.1%) command: systemd pid: 952 cpu: 0.0% Info: Processes: 134 Uptime: 14m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.105-v8-28 aarch64 bits: 64 compiler: gcc v: 9.2.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           fsck.repair=yes fsck.mode=auto root=/dev/sda2 rootfstype=ext4 elevator=deadline 
           rootwait 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 300.7 MiB (7.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 178x59 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.105-v8-28 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: noprefixroute scope: global 
           IP v6:  type: mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 119.11 GiB used: 2.43 GiB (2.0%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 7.32 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intenso model: SATA III SSD size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: SBFM11.2 temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 170d 7h cycles: 79 written: 2.7 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.41%) used: 2.39 GiB (2.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 40.7 MiB (16.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
           label: system-boot uuid: 85F3-CC2B 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.07 GiB fs: ext4 label: writable 
           uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: system-boot uuid: 85F3-CC2B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: GreenAsia USB to PS/2 Adapter type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:0020 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 1f75:0611 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 
           1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 0.5% command: init pid: 1 mem: 8.07 MiB (0.2%) 
           2: cpu: 0.2% command: [usb-storage] pid: 111 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 18.9 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 600 cpu: 0.0% 
           2: mem: 16.4 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 546 
           cpu: 0.0% 
           3: mem: 8.24 MiB (0.2%) command: systemd-journald pid: 170 cpu: 0.0% 
           4: mem: 8.07 MiB (0.2%) command: init pid: 1 cpu: 0.5% 
           5: mem: 6.64 MiB (0.1%) command: systemd pid: 952 cpu: 0.0% 
Info:      Processes: 134 Uptime: 14m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 
           alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

Benchmark #18704 - Brand: Intenso SSDSataIII Series