Benchmark #19659 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#35 / 1,679
444
#244 / 1,679
#242 / 984
#5 / 370
15,929
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-21 04:45:53
#19,659
5,924
-10,005 (-168.89%)
Dirk
Intenso256 SSD on RPI4

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
256G
SSD
Intenso
SSDSATAIII
2.5 inch
SATA
3.00
5,000
1d6b:0539
0x1d6b (Linux Foundation)
0x0539 (JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
185 MB/s
133.13 MB/s
151.91 MB/s
5,241 IOPS
4,191 IOPS
20,967 KB/s
16,766 KB/s
26,855 KB/s
25,246 KB/s
15,756 KB/s
21,874 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=12345678-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 1005.8 MiB (25.2%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev resolution: 1920x1080~60Hz OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 238.47 GiB used: 15.19 GiB (6.4%) ID-1: /dev/sda type: USB vendor: Intenso model: N/A size: 238.47 GiB block size: physical: 512 B logical: 512 B rev: 0100 scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.43 GiB (98.41%) used: 15.14 GiB (6.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9F2D-0578 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:4 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 Hub: 1-1.2.1:6 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 Device-1: 1-1.4:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:4 info: JMicron / JMicron USA JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0539 Hub: 2-2:2 info: Realtek ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 0bda:0411 Hub: 2-2.1:3 info: Realtek ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 0bda:0411 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/raspotify.list 1: deb https: //dtcooper.github.io/raspotify raspotify main Processes: CPU top: 5 1: cpu: 7.7% command: chromium-browser-v7 pid: 2413 mem: 76.7 MiB (2.2%) 2: cpu: 7.4% command: vncserver-x11-core pid: 502 mem: 32.4 MiB (0.9%) 3: cpu: 7.1% command: chromium-browser-v7 pid: 2994 mem: 88.0 MiB (2.5%) 4: cpu: 6.7% command: chromium-browser-v7 pid: 2370 mem: 127.6 MiB (3.6%) 5: cpu: 6.0% command: xorg pid: 628 mem: 64.7 MiB (1.8%) Memory top: 5 1: mem: 127.6 MiB (3.6%) command: chromium-browser-v7 pid: 2370 cpu: 6.7% 2: mem: 91.6 MiB (2.6%) command: chromium-browser-v7 pid: 2554 cpu: 0.6% 3: mem: 88.9 MiB (2.5%) command: chromium-browser-v7 pid: 2932 cpu: 3.6% 4: mem: 88.0 MiB (2.5%) command: chromium-browser-v7 pid: 2994 cpu: 7.1% 5: mem: 76.7 MiB (2.2%) command: chromium-browser-v7 pid: 2413 cpu: 7.7% Info: Processes: 191 Uptime: 14m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=12345678-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 1005.8 MiB (25.2%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 238.47 GiB used: 15.19 GiB (6.4%) 
           ID-1: /dev/sda type: USB vendor: Intenso model: N/A size: 238.47 GiB block size: 
           physical: 512 B logical: 512 B rev: 0100 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 234.43 GiB (98.41%) used: 15.14 GiB (6.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 9F2D-0578 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:4 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 
           Hub: 1-1.2.1:6 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 
           Device-1: 1-1.4:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:4 
           info: JMicron / JMicron USA JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 152d:0539 Hub: 2-2:2 info: Realtek ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 0bda:0411 
           Hub: 2-2.1:3 info: Realtek ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 0bda:0411 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspotify.list 
           1: deb https: //dtcooper.github.io/raspotify raspotify main
Processes: CPU top: 5 
           1: cpu: 7.7% command: chromium-browser-v7 pid: 2413 mem: 76.7 MiB (2.2%) 
           2: cpu: 7.4% command: vncserver-x11-core pid: 502 mem: 32.4 MiB (0.9%) 
           3: cpu: 7.1% command: chromium-browser-v7 pid: 2994 mem: 88.0 MiB (2.5%) 
           4: cpu: 6.7% command: chromium-browser-v7 pid: 2370 mem: 127.6 MiB (3.6%) 
           5: cpu: 6.0% command: xorg pid: 628 mem: 64.7 MiB (1.8%) 
           Memory top: 5 
           1: mem: 127.6 MiB (3.6%) command: chromium-browser-v7 pid: 2370 cpu: 6.7% 
           2: mem: 91.6 MiB (2.6%) command: chromium-browser-v7 pid: 2554 cpu: 0.6% 
           3: mem: 88.9 MiB (2.5%) command: chromium-browser-v7 pid: 2932 cpu: 3.6% 
           4: mem: 88.0 MiB (2.5%) command: chromium-browser-v7 pid: 2994 cpu: 7.1% 
           5: mem: 76.7 MiB (2.2%) command: chromium-browser-v7 pid: 2413 cpu: 7.7% 
Info:      Processes: 191 Uptime: 14m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19659 - Brand: Intenso SSDSataIII Series