Benchmark #21003 - pibenchmarks.com

Brand: FNK Tech USB SD Card Reader
USB Flash
#104 / 1,700
183
#1,316 / 1,700
#27 / 94
#28 / 89
1,239
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-27 03:22:29
#21,003
838
-401 (-47.85%)
Anonymous
Pi3 B+ 16gb SD Card (default)

Storage Details
FNK Tech USB SD Card Reader
USB Flash
14.6G
USB Flash
FNK
GenericMass-Storage
1908:0226
0x1908 (GEMBIRD)
0x0226 (OneTouch 5300 USB)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
10.4 MB/s
18.9 MB/s
18.87 MB/s
551 IOPS
1,332 IOPS
2,207 KB/s
5,329 KB/s
10,617 KB/s
7,236 KB/s
5,704 KB/s
2,213 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 166.9 MiB (16.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 14.84 GiB used: 1.33 GiB (9.0%) ID-1: /dev/sda type: USB vendor: Generic model: N/A size: 14.84 GiB block size: physical: 512 B logical: 512 B rev: 1.11 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.24%) used: 1.28 GiB (8.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:5 info: GEMBIRD type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1908:0226 Device-3: 1-1.2:4 info: Corsair type: Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 1b1c:1b2e Device-4: 1-1.3:6 info: Dell type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 413c:2107 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 7.8% command: [kworker/3:0-mm_percpu_wq] pid: 27 mem: 0.00 MiB (0.0%) 2: cpu: 5.8% command: [kworker/3:5-memcg_kmem_cache] pid: 1390 mem: 0.00 MiB (0.0%) 3: cpu: 1.5% command: init pid: 1 mem: 7.97 MiB (0.8%) 4: cpu: 0.6% command: [kworker/3:2-events] pid: 68 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: [usb-storage] pid: 74 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.97 MiB (0.8%) command: init pid: 1 cpu: 1.5% 2: mem: 6.64 MiB (0.7%) command: systemd pid: 647 cpu: 0.0% 3: mem: 5.98 MiB (0.6%) command: systemd-journald pid: 110 cpu: 0.1% 4: mem: 5.71 MiB (0.6%) command: systemd-logind pid: 346 cpu: 0.0% 5: mem: 5.56 MiB (0.6%) command: systemd-timesyncd pid: 260 cpu: 0.0% Info: Processes: 126 Uptime: 9m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 166.9 MiB (16.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 14.84 GiB used: 1.33 GiB (9.0%) 
           ID-1: /dev/sda type: USB vendor: Generic model: N/A size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.11 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.24%) used: 1.28 GiB (8.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:5 info: GEMBIRD type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.0 speed: 480 Mb/s chip ID: 1908:0226 
           Device-3: 1-1.2:4 info: Corsair type: Mouse,HID driver: hid-generic,usbhid 
           interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 1b1c:1b2e Device-4: 1-1.3:6 info: Dell type: Keyboard driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s chip ID: 413c:2107 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 7.8% command: [kworker/3:0-mm_percpu_wq] pid: 27 mem: 0.00 MiB (0.0%) 
           2: cpu: 5.8% command: [kworker/3:5-memcg_kmem_cache] pid: 1390 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.5% command: init pid: 1 mem: 7.97 MiB (0.8%) 
           4: cpu: 0.6% command: [kworker/3:2-events] pid: 68 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: [usb-storage] pid: 74 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.97 MiB (0.8%) command: init pid: 1 cpu: 1.5% 
           2: mem: 6.64 MiB (0.7%) command: systemd pid: 647 cpu: 0.0% 
           3: mem: 5.98 MiB (0.6%) command: systemd-journald pid: 110 cpu: 0.1% 
           4: mem: 5.71 MiB (0.6%) command: systemd-logind pid: 346 cpu: 0.0% 
           5: mem: 5.56 MiB (0.6%) command: systemd-timesyncd pid: 260 cpu: 0.0% 
Info:      Processes: 126 Uptime: 9m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21003 - Brand: FNK Tech USB SD Card Reader